SCANSTRUT SC-CW-02F Rokk Wireless Charge Surface 10w Instruction Manual
- June 2, 2024
- SCANSTRUT
Table of Contents
SCANSTRUT SC-CW-02F Rokk Wireless Charge Surface 10w
Parts List
-
Charger
-
Alcohol wipe
Tools Required
-
65mm (2.5”) Hole Saw
-
Power drill
Technical Information
Input voltage range| 10-30V DC
(12 /24V system)
---|---
Input current max| 2A
Output power| 10W (9V, 1.1A)
Standby power draw| < 0.2W
Waterproof rating| IPX6 front and back
Certifications| Qi, CE, UKCA, FCC, ROHS, UNECE R10 E24, RCM, IC, PSE
Installation Instructions
READ THE IMPORTANT SAFETY INFORMATION LEAFLET BEFORE INSTALLING
- Drill hole 64/65mm (2.5”)
Panel thickness > 3mm (0.1”)
-
Remove self-adhesive backing
-
Use alcohol wipe to ensure surface is free from dirt or grease and insert into hole.
-
Connect wires to 12/24V supply, ensuring a waterproof connection. Fuse appropriately according to input voltage and current.
Share your installation with us.
@scanstrut
UK & International
+44 (0)1392531280
sales@scanstrut.com
For further installation and warranty information please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>