SCANSTRUT SC-CW-BZ ROKK Wireless Bezel Accessory Pack Instruction Manual
- June 3, 2024
- SCANSTRUT
Table of Contents
ROKK WIRELESS BEZEL ACCESSORY PACK
(SC-CW-BZ) 09-06-2022 (Issue 2)
Installation Instructions
Parts List
Tools Required
Parts NOT Included
Technical Information – SC-CW-02F
| Input voltage range | (102,2% C/Dsystem) |
|---|---|
| Input current max | 2A |
| Output power | 10W (9V, 1.1A) |
| Standby power draw | < 0.2W |
| Waterproof rating | IPX6 front and back |
| Certifications | Qi, CE, UKCA, FCC, ROHS, UNECE R10 E24, RCM,IC, PSE |
READ THE IMPORTANT SAFETY INFORMATION LEAFLET BEFORE INSTALLING
-
Drill hole 10mm (25/64”).
-
Place charger and bezel over hole to mark screw centres. Caution Do not remove self-adhesive backing from tape, dry fit only.
-
Remove and mark hole centres in bezel.
-
Drill 3x 1.6mm
(1/16”) pilot holes. -
Screw bezel to surface.
-
Remove self adhesive backing from charger.
-
Install charger into bezel.
-
Connect wires to 12/24V supply, ensuring a waterproof connection.
Fuze appropriately according to input voltage and current. See Surface Installation instructions for Electronic information.
Share your installation with us.
UK & International
+44 (0)1392531280
sales@scanstrut.com
| For further installation
and warranty information
please visit: www.scanstrut.com|
USA
+1 860 308 1416
usasales@scanstrut.com
---|---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>