SCANSTRUT LMB-F1 Backstay Self-Levelling Mount Instruction Manual
- June 4, 2024
- SCANSTRUT
Table of Contents
Scanstrut Backstay Self-Levelling Mount Installation
Instructions
LMB-F1 / LMB-F2
Tools Required
LMB-F1 Backstay Self-Levelling Mount
Issue 7
IMPORTANT NOTES
LMB-F1/A1 and LMB-F2/A2 are intended to mount a single radome as stated in the
latest Scanstrut Product Guide – subject to change without prior notice. A GPS
antenna can be installed using part LM-GPS.
Use of the LMB-F1/A1 and LMB-F2/A2 with unapproved products, or overloading,
invalidates any warranty.
No liability is accepted for damage caused by incorrect installation.
Product has been designed specifically for the mounting of approved radar
(listed in the latest Scanstrut Pod Product Guide.) under normal boating
conditions.
Product is not designed to withstand overload, impact, excessive force or
entanglement in sails and rigging.
The installation and assembly must be regularly inspected for evidence of
damage or lost parts. This product is designed to it backstay cables from Ø7
[0.27” to Ø14mm].
E-mail: sales@scanstrut.com
E-mail: usasales@scanstrut.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>