INNOKIN JEM-Goby Starter Kit Review User Guide

INNOKIN JEM-Goby Starter Kit Review

INSTALLATION INSTRUCTION

HOW TO FILL JEM TANK

1. ATTACH TANK
2. UNSCREW THE CAP AND TOP FILL

TOP VIEW

REPLACE THE CoIL

TIP: MAKE SURE THERE IS NO E-LIQUID IN THE TANK BEFORE REMOVING THE COIL!

TIPS AND BEST PRACTICES

• DO NOT LET THE BATTERY RUN EMPTY.
• RECHARGE WHEN LED IS RED.
• USE THE PROVIDED USB CABLE AND CERTIFIED WALL CHARGER TO CHARGE THE BATTERY.
• DO NOT LEAVE THE BATTERY UNATTENDED WHILE CHARGING.

TO CLEAN THE TANK:

• UNSCREW THE TOP CAP AND REMOVE THE COIL
• FILL THE TANK WITH WARM WATER AND
• SCREW THE TOP CAP ON
• GENTLY SHAKE, WITH WATER INSIDE
• UNSCREW THE CAP AND EMPTY THE WATER;

REPEAT IF NECESSARY

• AIR DRY COMPLETELY AND READY TO USE

SUPPORT

• facebook.com/lnnokin.Technology
• instagram.com/innokintechnology
• twitter.com/innokintech
• reddit.com/r/innokin
• Support@innokin.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>