INNOKIN Platform Series Zenith Minimal Tank User Guide
- June 16, 2024
- INNOKIN
Table of Contents
INNOKIN Platform Series Zenith Minimal Tank
COMPONENTS
FILLING THE TANK
- Push down and rotate the top cap one quarter turn counterclockwise and remove it to access the fill port.
- Add your E-liquid through the fill port.
- Replace the top cap. Align the top cap with the groove, then push down and rotate it one quarter turn clockwise to lock in it place.
IMPORTANT
- Wait for at least five minutes after filling to allow the new coil to saturate with E-liquid.
- You can also manually prime your coil by placing three drops of E-liquid into the coil.
- Keep the tank from going completely empty. Refill it regularly to avoid dry burning or coil damage.
- For more information and a demonstration, scan the QR card to see the instructional videos.
ADJUSTING THE AIRFLOW
Rotate the airflow ring on the bottom of the tank and customize the airflow to
achieve your desired draw.
CHANGING THE COIL
- When you experience a burnt taste or a decrease in flavour and/or vapour production, it’s time to change the coil.
- Unscrew the tank base and remove the coil.
- Prime and install a new coil in its place.
- Be sure the coil notches line up with the tank notches. Screw the tank base back into place.
- *A good rule of thumb would be to replace the coil at least once per week.
SPECIFICATIONS
- Dimension: q,24 x 45.3 mm
- Capacity: 4ml / 2ml (TPD)
- Coils & Suggest Wattage: Z-Coil a.an (15-1aW); Z-Coil 0.30 (30-40W)
- Compatible with All Z-Coils
PACKING LIST
- 1x Zenith Minimal Tank,
- 1x MTL Z Coil a.an (Pre-installed),
- 1x RDL Z Coil 0.30 (In-box),
- 1x Replacement Tube,
- 1x MTL Mouthpiece (In-box),
- 1x RDL Mouthpiece (In-box),
- 1x Replacement O-Ring Set,
- 1x Tutorial QR Card,
- 1x Quick Guide
FOR FURTHER ASSISTANCE
If you require additional information or support, please scan the provided
tutorial QR card to see detailed instructional videos or consult the Quick
Guide. You can also contact us at
support@innokin.com for further assistance.
If you hove any questions, contact
support@innokin.com
focebook.com/lnnokin.Technology
instogrom.com/innokintechnology
twitter.com/innokintech
reddit.com/r/innokin
support@innokin.com
Manufacturer. Shenzhen lnnokin Technology Co., Ltd.
Address: 1st-5th Floor, Building 6, Xinxintion Industrial Pork. Xinsho
Rood, Shaer Community, Shojing, Baoon District, 518104, Shenzhen, Chino.
Telephone: +86 755 2989 8770
Email: info@innokin.com
Production License: 5144030162
ISO 9001 / 14001 / 45001, ISO 13485, and cGMP Certified. MADE IN CHINA
European Representative:
FRANCE VAPOTAGE DIS1RIBUTION
‘5’7 impasse de lo Ferme Cordon
Rue de lo Croix Bougord 59810 LESGUIN Fronce
Telephone: +33 320020152
Email: guilloume.viloin@innokin.fr
KEEP OUT OF REACH OF CHILDREN.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>