INNOKIN ENDURA M18 Pod Kit User Guide
- June 2, 2024
- INNOKIN
Table of Contents
INNOKIN ENDURA M18 Pod Kit
Be part of our community
For the latest news, products and helpful information. You’re invited to follow our social media channels.
- facebook.com/lnnokin.Technology
- instagram.com/innokintechnology
- twitter.com/innokintech
- reddit.com/r/innokin
- support@innokin.com
COMPONENTS
HOW TO USE
- Fill the ENDURA MlB Pod
How to Fill
- • Pulltabtoopen.
- Add E-liquid carefully.
- Push tab securely closed.
IMPORTANT: Wait 5 minutes after filling to prime new coils.
- Insert pod into the EN DURA MlB battery.
- Adjust wattage: (Power Off)
- Hold button. Wattage cycles. Release to select.
- Regular lOW
- Boost 13.5W
- Click button 3 times to power on the M 18.
- Adjust airflow: Choose tight or open draw.
- Adjustable airflow Flip Pod to choose Tight or Open Draw:
- Align with LED Side
- Tight Draw: Side#l
- Open Draw: Side#2
- Replace coil when there is a reduction in flavour or vapour.
HOW TO CHANGE THE COIL
IMPORTANT: Make sure the pod is empty before changing the coil.
- Twist base to open.
- Pull base up.
- Pull to remove Coil.
- Insert new coil.
- Reattach base.
- Twist base to close securely.
CHARGING
- Charge with a certified wall-charger and included Type-C USB cable.
- Gently insert the Type-C USB cable correctly.
- White LEDs indicate the EN DURA MLB is charging.
- LEDs power off when the EN DURA MLB is fully charged.
- Do not leave the device charging unattended.
- Do not store the EN DURA MLB on an empty battery. Keep at least 1/2 charged when not in use.
WARNING
- Keep pod and battery contacts clean of debris and eliquid.
- Do not vape when pod is empty.
- If there is a burnt taste, replace coil.
TROUBLESHOOTING
- White LEDs Flash 3 Times: Low Voltage Protection.
- Solution: Charge the battery.
- White LEDs Lights for 5 Seconds: Low Coil Resistance.
- Solution: Check or replace coil.
- White LEDs Flash 10 Times: High Coil Resistance.
- Solution: Check or replace coil.
- White LEDs Flash 10 Times: Vape Timeout – Maximum 10 seconds vape time.
- Solution: Wait 10 seconds to vape.
- White LEDs Flash 3 Times Twice: Temperature Limit Protection. Remove pod and discontinue using the device. Contact support@innokin.com.
SPECIFICATIONS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>