MOZA Mini P Mobile Gimbal User Manual
- June 4, 2024
- Moza
Table of Contents
MOZA Mini P Mobile Gimbal
Battery and Charging
The MOZA Mini-P max has a built-in lithium battery. Fully charge the battery
before first use. The LED power indicator blinks when the battery level is
less than 20%. Charge it with an universal USB-C cable, Mini-P max can be
charged through a phone charger and mobile power supplier. The charging stops
automatically when the battery is fully charged.
Notes:
- Please do not over-charge or over-discharge the battery. Otherwise the battery will be damaged.
- Recharge and discharge the battery every 3 months to keep it intact if it is left unused for a long time.
Mini-P max
-
TiltArm
-
Pan Knob
-
Pan Storage Lock
-
Slide Lock
-
Power Button
-
USB-C Charging Port
-
Reset hole
-
1/4″ Port
-
Tilt Storage Lock
-
Roll Motor
-
Roll Storage Lock
-
Pan Arm
-
Joystick
-
Operation Button
-
Battery Level Indicator
-
Roll Knob
-
RollArm
-
Zoom button
-
Tilt Motor
-
Tilt Knob
-
Quick Release Plate
-
Quick Release Plate
Lock Knob -
Camera Control Port
-
Trigger button
Store and Expand the Mini-P Max
Mini-P Max is equipped with a three-axes storage lock for gimbal storage and leveling.
- Unlock the pan storage lock, roll storage lock and tilt storage lock to turn on the three-axes motor.
- Rotate the pan arm 90° clockwise, and then lock the pan storage lock (from a top view)
- Rotate the roll arm 90° counterclockwise, and then lock the roll storage lock (from a front view)
Mounting and Balancing the Camera
Tilt Axis Leveling
- Place the longer side of the quick release plate under the camera, and secure the camera with a 1 /4″screw.
- Loosen the quick release plate lock knob, slider the shorter side of the quick release plate into center of the quick-release base, then lock the knob.
- Fine-tune the quick-release plate back and forth until the lens is horizontally forward, then lock the knob.
- (From a left view,) Rotate the tilt arm 90° clockwise,loosen the tilt knob, adjust the tilt arm left and right until the lens is straight up (leveled), then lock the knob.
Note: How to judge whether the tilt axis is leveled? Answer: Once the tilt
axis is leveled, the lens can maintain balance and stability at any angle
Roll Axis Leveling
- (From a front view,) Unlock the roll storage lock, loosen roll lock, adjust the roll arm left and right until it is balanced horizontally, and then lock the knob.
Note: How to adjust the arm smoothly
Answer: For precise adjustment, it’s recommended to keep the arm with your
hand when leveling.
Pan Axis Leveling
- Unlock the pan storage lock, loosen pan lock, rotate the pan arm 90° clockwise, adjust the pan arm left and right until it is balanced horizontally, and then lock the knob.
Button Features
Simplified Operation
- Down Button
- Double press: Sports gear mode, double press again to exit sports gear mode
- Triple press: Inception mode, Triple press again to exit inception mode
- Joystick
- Move upwards: phone camera turns up
- Move downwards: phone camera turns down
- Move leftwards: phone camera turns left
- Move rightwards: phone camera turns right The speed of camera moving increases with the larger moving range of joystick
- Follow Function
- Left Button
Press twice the left button: FPV mode. Press twice again to stop
- Left Button
-
Check the Battery Level
Status Indicator- Blue light is always on: 60%-100% battery level
- Blue light flashes slowly: 20%-60%battery level
- Blue light flashes quickly: 0%-20% battery level
- Orange light flashes slowly: Gimbal motor enters to sleep mode
- Blue and orange lights flash quickly: FPV mode
- Blue and orange lights flash slowly in turn: Firmware upgrade mode
- The red light is always on: Charging
- The red light is off: Charging Completed
-
Trigger
- Double press: Re-center
- Single press: Auto focus (some cameras are not supported)
- Triple press: Switch to selfie mode
- Hold: Switch to tilt follow mode
- Triple press and hold: Switch to All-locked mode
-
Zoom Button
Triple press+ button: Auto tune -
Button
- Press once: Sleep mode
- Long press: Turn on/ off
Product Specification
- Payload Specs 130g~900g I 0.291bs~1.981bs
- Weight 71 0g/1.5651bs
- Dimensions (mm) Gimbal (unfolded): 30551166 Gimbal (folded): 198166102
- Supported Phone Size 58 ~ 88mm
- Battery Life 20 (h)
- Battery Specs Standard Voltage: 7.4 V Battery capacity: 2000 mAh
- Charging Time 3 (h)
- Mechanical Pan: 360° Roll: 330°
- Endpoint Range Tilt: 330°
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>