INNOKIN Kroma Buy Your Nova Kit User Manual
- June 1, 2024
- INNOKIN
Table of Contents
INNOKIN Kroma Buy Your Nova Kit
COMPONENTS
FILLING THE POD
Slide in the direction of the arrow and fill E-liquid in the fill port.
IMPORTANT
- Wait for at least five minutes after filling to allow the new coil to saturate with E-liquid.
- You can also manually prime your coil by placing three drops of E-liquid into the coil.
- Keep the tank from going empty of E-liquid. Refill it regularly to avoid dry hits or coil damage.
REMOVING THE POD FROM THE DEVICE
Push the pod upwards following the arrow shown in the diagram.
CHANGING THE COIL
When you experience a burnt taste or a decrease in flavour and/or vapour
production, it’s time to change the coil.
- Pull and remove the old coil.
- Prime and install a new coil in its place.
ADJUSTING THE AIRFLOW
Adjust the airflow button to customize the airflow to achieve your desired
draw.
POWER ON/OFF THE DEVICE
Click the power button three times within two seconds.
Secondary Screen
Hold the power button and + button to access the secondary screen display.
POWER ADJUSTMENT
Hold the + button or – button to increase/decrease the wattage.
LOCKING/UNLOCKING THE DEVICE
Hold the power button and – button to lock/unlock the device. In lock mode,
the device can vape but cannot make other adjustments.
MENU SETTINGS
- Hold the + button and – button to access the menu settings.
- Press the fire button to confirm the ontions.
CUTOFF: Vaping automatic cut-off time 3s-18s
SCREEN: Screen display time 5s-180s
CHARGING
- Charge promptly based on battery level.
- Use the provided charging cable and a standard USB output charger with the correct charging current and voltage range.
CAUTIONS
- Turn the device off when not in use to avoid depleting the battery and minimize excess battery wear.
- Do not leave the charging device unattended.
- Protect the device from direct sunlight, dust, moisture, or mechanical shock.
- Avoid dropping, throwing, or mishandling the device to prevent damage.
- Keep the device away from any water, liquid, or flammable gas.
SPECIFICATIONS
PROTECTIONS
If you have any questions, contact
[email protected]
facebook.com/Innokin.Technology
instagram.com/innokintechnology
twitter.com/innokintech
reddit.com/r/innokin
[email protected]
Manufacturer: Shenzhen Innokin Technology Co., Ltd.
Address: 1st-5th Floor, Building 6, Xinxintian Industrial Park, Xinsha Road,
Shaer
Community, Shajing, Baoan District, 518104, Shenzhen, China.
Telephone: +86 755 2989 8770
Email: [email protected]
Production License: 5144030162
ISO 9001 / 14001 / 45001, ISO 13485, and GMP Certified.
MADE IN CHINA
European Representative
FRANCE VAPOTAGE DISTRIBUTION
57 impasse de la Ferme Cardon
Rue de la Croix Bougard 59810 LESQUIN France
Telephone: +33 320020152
Email: [email protected]