ONETOUCH 07295201A Ultra Plus Flex Blood Glucose Monitoring System User Guide
- June 3, 2024
- ONETOUCH
Table of Contents
ONETOUCH 07295201A Ultra Plus Flex Blood Glucose Monitoring System
Register your meter or download the Spanish Owners booklet
support.onetouch.com
Quick Start Guide
Use this guide to get to know your meter, and follow the steps inside to get started.
IMPORTANT: Please read the Owner’s Booklet that came with your system.
Intended use
The OneTouch Ultra Plus Flex™ Blood Glucose Monitoring System is intended to
be used for the quantitative measurement of glucose (sugar) in fresh capillary
whole blood samples drawn from the fingertip.
The OneTouch Ultra Plus Flex™ Blood Glucose Monitoring System is intended for self-testing outside the body (in vitro diagnostic use) by people with diabetes at home as an aid to monitor effectiveness of diabetes control.
Limitations
The OneTouch Ultra Plus Flex™ Blood Glucose Monitoring System is intended to
be used by a single patient and should not be shared. Do not use on multiple
patients. The OneTouch Ultra Plus Flex™ System is not to be used for the
diagnosis or screening of diabetes or for neonatal use. The OneTouch Ultra
Plus Flex™ System is not for use on critically ill patients, patients in
shock, severely dehydrated patients or hyperosmolar patients (with or without
ketosis). Do Not use the OneTouch Ultra Plus Flex™ System for alternate site
testing (AST).
PLEASE REFER TO YOUR OWNER’S BOOKLET FOR ADDITIONAL LIMITATIONS OF USE.
Set the time and date on your meter
Turn it on
Press and hold until the start-up screen appears.
Use buttons to edit each setting and press OK to confirm.
Set the time on the first SET screen
- Hour flashes. Press OK if correct or edit and confirm.
- Minutes flash. Press OK if correct or edit and confirm.
- AM/PM flashes. Press OK if correct or edit and confirm.
Set the date on the next SET screen
- Year flashes. Press OK if correct or edit and confirm.
- Month flashes. Press OK if correct or edit and confirm.
- Day flashes. Press OK if correct or edit and confirm.
Ready to test
Your meter setup is complete when the screen with 3 dashes appears.
Take a test
Insert a test strip (blue side and 2 silver prongs facing you) to turn the meter on.
View your reading
Your reading appears on the display. The Range Indicator arrow points to the blue, green, or red Range Indicator color bar, to let you know your reading is below, within, or above your range limit.
Optional: Connect to a mobile device
Your meter comes with Bluetooth® technology. This allows you to wirelessly
send your readings to a mobile device such as a phone or a tablet, where you
can view and graph them.
To learn more about using your meter’s wireless feature and view a complete
listing of compatible devices and software applications, visit us at
www.OneTouch.com.
Connecting your meter
Press OK and ^ at the same time to turn the Bluetooth® feature on and off.
When prompted by your mobile device, enter the PIN shown on your meter into
your device.
About the Range Indicator
Your meter comes with a Range Indicator that automatically lets you know if your reading is below, above or within your range limits. The high and low range limits used by the Range Indicator are pre-set as follows:
For details about changing the pre-set range limits to suit your needs, refer to your Owner’s Booklet.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by LifeScan Scotland Ltd. is under license. Other trademarks and trade names are those of their respective owners.
IMPORTANT SAFETY INSTRUCTIONS
- Refer to the User Guide or Owner’s Booklet for important information about cleaning and disinfecting your meter, lancing device and caps.
- After use and exposure to blood, all parts of this kit are considered biohazardous. A used kit may potentially transmit infectious diseases even after you have performed cleaning and disinfection.
For more information see: FDA Public Health Notification:
“Use of Fingerstick Devices on More than One Person Poses Risk for
Transmitting Bloodborne Pathogens: Initial Communication” (2010)
http://wayback.archive-it.org/7993/20170111013014/
http://www.fda.gov/MedicalDevices/Safety/AlertsandNotices/ucm224025.htm
CDC website on “Infection Prevention during Blood Glucose Monitoring and
Insulin Administration” (2010) http://www.cdc.gov/injectionsafety/blood-
glucose-monitoring.html
As your partner in diabetes care, we welcome you to contact us (7 days a week, 8:00 AM – 8:00 PM Eastern Time) at 1 888 567-3003 (English), 1 888 567-3010 (Español), or www.OneTouch.com
References
- LifeScan OneTouch Community
- Archive-It Wayback Machine
- Safety Communications | FDA
- OneTouch® | Glucose Meters, Test Strips & Diabetes Management
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>