SALAMANDER DESIGNS DYNO 102 MED Universal Adapter Installation Guide
- June 4, 2024
- SALAMANDER DESIGNS
Table of Contents
SALAMANDER DESIGNS DYNO 102 MED Universal Adapter
- Must be used in conjunction with Dyno 102 Medium.
- Align Bracket by extending and spreading arms to accommodate mounting pattern on the back of the TV.
Note: Remove plastic slide covers from screw mounting locations.
- Attach to TV using mouting screws. Refer to TV manufacturer installation manual to determine the correct mount screw size.
Note: Adapter Spacers can be utilized in applications where interferences
at back of TV prevent proper fi t of Adapter Bracket.
- Hook and secure onto Dyno 102 Medium mount assembly.
IMPORTANT SAFETY INSTRUCTIONS
Carefully inspect the mount for shipping damage or missing parts. If any damage is apparent or you are missing parts contact Salamander Designs at 800-535-5659. Read ALL assembly instructions before assembly. If you have any questions, please contact your installation contractor or Salamander Designs. Mounts must be attached as specified in assembly instructions. Improper installation can result in serious personal injury. This TV mount is intended for use with Flat-Panel TVs up to 42” with a maximum weight capacity of 100 lbs. Use of this mount with products heavier than the maximum weight or larger than the size indicated may result in the collapse of the mount causing possible injury. The mount is designed to be installed using wall studs or supporting frames. Not for use on steel stud walls or old cinder block walls. Installation to these type of walls will require other fasteners than those provided. Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
SALAMANDER DESIGNS LIMITED WARRANTY
Salamander Designs Ltd. (Salamander) provides the following Limited Warranty. The Limited Warranties herein described for the specific products listed below shall be in lieu of any other warranty, expressed or implied, including but not limited to any implied warranty of merchantability or fitness for a particular use. These Limited Warranties do not cover damages incurred in shipment, failures caused by other products not supplied by Salamander, or failures due to accident, misuse, abuse or alteration of the product. Salamander’s sole liability and the purchaser’s exclusive remedy shall be for the repair, or at Salamander’s option, for the replacement of the defective part as provided herein. Notwithstanding the above, if replacement parts for defective materials are not available, Salamander reserves the right to make reasonable compensation in lieu of repair or replacement. Liability for incidental or consequential damages under the warranty is excluded. Some states do not allow the limitation of incidental or consequential damages.
Therefore, the above limitation may not apply in certain instances. Defective product must be given Return Authorization by Salamander and is to be returned to the factory prepaid, in the original carton and packing materials. Any damage incurred in a shipment not in original packing shall be the responsibility of the owner. Warranty repairs will be returned to the owner prepaid, within the continental U.S.A. only. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Salamander provides a five (5) year Limited Warranty from the date of the purchase, on material damage and/or manufacturing defects. Salamander guarantees that if, during the warranty period, any defects should occur in the product resulting from faulty material and/or assembly, as assessed by Salamander, the product will be repaired or, if necessary, replaced free of charge. The warranty expressly does not apply to normal wear and tear that becomes apparent after normal use.
During the mounting of the product, instructions for the installation and use of the television must be followed precisely. Correct mounting is essential. For maximum weights, screen size and correct application, please refer to the product installation instructions. Failure to comply with these requirements or the occurrence of any of the following circumstances will result in the termination of any otherwise applicable Limited Warranty:
- If the holes in the wall required for the installation of the product were not drilled in accordance with the instructions for use of the product, or if the product was not properly installed or used.
- If you (or third parties) – without Salamander’s or your Salamander dealer’s prior knowledge and permission – carried out work or repairs on the product.
- If a defect is the result of external causes, i.e. in the case of abnormal types of damage caused by climatological, thermal, mechanical or other external influences.
- If the product is not used in accordance with its intended use or if it is damaged as a result of negligence.
©2008 Salamander Designs Ltd. Doc #503-012 v4.08