ONETOUCH Verio Flex Blood Glucose Monitoring System User Guide
- June 6, 2024
- ONETOUCH
Table of Contents
ONETOUCH Verio Flex Blood Glucose Monitoring System
Quick Start Guide
Use this guide to get to know your meter, and follow the steps inside to get started.
IMPORTANT: Please read the Owner’s Booklet that came with your system.
Set the time and date on your meter
Turn it on
Press and hold until the start-up screen appears. Use buttons to edit each setting and press to confirm.
- Set the time on the first SET screen
- Hour flashes. Press or edit and confirm.
- Minutes flash. Press correct or edit and confirm.
- AM/PM flashes. Press if correct or edit and confirm.
- Set the date on the next SET screen
- Year flashes. Press if correct or edit and confirm.
- Month flashes. Press if correct or edit and confirm.
- Day flashes. Press if correct or edit and confirm.
Ready to test
Your meter setup is complete when the screen with 3 dashes appears.
Take a test
- Insert a test strip (gold side and 2 silver prongs facing you) to turn the meter on.
- Flashing blood drop appears.
Channel
- Apply blood sample to the channel on either side of the test strip. Wait for the channel to fill.
- The channel turns red and the meter counts down from 5 to 1.
View your reading
Example of an In Range reading
Your reading appears on the display. The Range Indicator arrow points to the
blue, green, or red Range Indicator colour bar, to let you know your reading
is below, within, or above your range limit.
- Example of a Below Range reading
- Example of an Above Range reading
Optional: Connect to a mobile device
Your meter comes with Bluetooth® technology. This allows you to wirelessly
send your readings to a mobile device such as a phone or a tablet, where you
can view and graph them. To learn more about using your meter’s wireless
feature and view a complete listing of compatible devices and software
applications, visit us at www.OneTouch.ca.
Connecting your meter
Press and at the same time turn the Bluetooth® feature on and off. When
prompted by your mobile device, enter the PIN shown on your meter into your
device.
- The symbol means Bluetooth® is on.
- Example of a PIN number.
Meter symbols
About the Range Indicator
Your meter comes with a Range Indicator that automatically lets you know if your reading is below, above or within your range limits. The high and low range limits used by the Range Indicator are pre-set as follows:
- The pre-set low range limit
- The pre-set high range limit
For details about changing the pre-set range limits to suit your needs, refer to your Owner’s Booklet. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by LifeScan Europe is under license. Other trademarks and trade names are those of their respective owners. Contact the OneTouch® Customer Care Line at 1 800 663-5521, Monday-Friday, 9 am-8 pm Eastern, 6 am-5 pm Pacific, or visit www.OneTouch.ca. Manufactured by: LifeScan Europe GmbH Gubelstrasse 34 6300 Zug Switzerland Consult instructions for use. Meter Made in China OneTouch® Rev. Date: 01/2021 © 2018–2021 LifeScan IP Holdings, LLC AW 06933304C
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>