Ipixo Outdoor Bullet Camera User Guide
- June 6, 2024
- Ipixo
Table of Contents
Ipixo Outdoor Bullet Camera
Start Up Guide
Struggling to read?
View this start up guide online at
time2technology.com/manuals
What’s in the box
|
---|---
Outdoor Camera| Screw Tool
---|---
UK Power Adapter| WiFi Antenna
Wall Mounting Screws| Start Up Guide
Be ready
You will need your WiFi router password. Write it down below so it’s handy
when you need it!
Get Started
Please complete setup before mounting the camera.
Connect the camera to the mains using the power adapter provided.
The red LED will come on once plugged in and the camera will chime before it
is ready to connect.
If you would like the camera to record, you will be required to insert a Micro
SD card. The camera will support any sized Micro SD card up to 128 GB.
What do the
flashing lights mean?
Download App
Download the “Clan at home” App on the iOS App Store or Google Play Store.
Register
Select Register, carefully read the Privacy policy and select Agree if you would like to progress
Enter your email address
Enter the verification code sent via email
Create your password to login
Add Home
Click Me in the bottom right-hand corner
Select Home Management
Select My Home. Enter a name for your home and a location.
Click Save
Select Complete and your home will be created.
Add Camera
In My Home, click the (+) icon in the top right-hand corner of the screen
Select
Security and Sensors on the left-hand side and click Smart camera
Make sure
the LED indicator is flashing red, then select the tick box and press Next
Enter your
WiFi router password Then press Next →
Remove the
plastic film from the camera lens
Hold your phone up to the camera as described in App
If you heard the camera chime, press I Heard a Prompt.
If you don’t hear the chime, reposition the camera in front of the phone and
scan the QR code again.
The camera
will then establish a connection to Clan.
Once
connected you can change the camera’s name and select the room it’s in.
Press Done
Live View
Add SD Card
If you would like the camera to record you will be required to insert a Micro SD card. The camera will support any sized Micro SD card up to 128 GB.
Step 1
Turn off the power to the camera.
Step 2
Find the Micro SD card slot on the underside of the camera and insert the card
into the slot far enough for it to click into place.
Step 3
Turn the power to the camera back on.
Format SD
Card
Before the camera can start recording you will have to format the micro SD card.
Step 3
Select your camera and click on the pencil icon in the top-right Select SD
Card Settings.
Step 4
Click Format SD Card and press confirm, the camera wilbegin to format the
Micro SD card.
Please note: it will take a couple of minutes to format the card.
Playback
Multi-Camera View
Step 1
Click on the camera on the top right-hand corner
Web View
Go to the following website on your PC.
www.time2technology.com/webview and
a QR Code will be displayed
Go into the
Clan at Home App and click on Me in the bottom right-hand corner
Click on the
square on Using your phone scan the top right-hand corner the QR code
Ensure the QR code is within the Green square Then click confirm to log in
- Select the home where you would like to view your cameras.
- Select your camera.
- Speaker – Listen in on what is going on around your camera.
- Fullscreen
- Cloud Service – View the recorded footage from the Cloud Service.
- Multi-Camera View – Select how many cameras you would like to see at once.
Reset
If you are having trouble connecting to the Camera you may need to do a reset.
How to reset the Camera
Hold down the button on the underside of the camera for up to 15 seconds until
the camera chimes and the LED is flashing red.
Installation
Easy Mounting
Use the provided wall screws to mount the camera onto the wall.
Adjust the camera angle according to your requirements.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>