OneTouch AW 06933305A Verio Flex User Guide
- May 15, 2024
- ONETOUCH
Table of Contents
Quick Start Guide
OneTouch Verio Flex® Blood
Glucose Monitoring System
AW 06933305A Verio Flex
Register your meter forhelp and support:
Use this guide to get to know your meter, and follow the steps inside to get started.
IMPORTANT: Please read the Owner’s Booklet that came with your system.
AW 06933305A
Set the time and date on your meter
Turn it on
Press and hold until the start-up screen appears.
Use buttons to edit each setting and press to confirm.
Set the time on the first SET screen
- Hour flashes. Press if correct or edit and confirm.
- Minutes flash. Press if correct or edit and confirm.
- AM/PM flashes. Press if correct or edit and confirm.
Set the date on the next SET screen
- Year flashes. Press if correct or edit and confirm.
- Month flashes. Press if correct or edit and confirm.
- Day flashes. Press if correct or edit and confirm.
Ready to test
Your meter setup is complete when the screen with 3 dashes appears.
Take a test
Insert a test strip (gold side and 2 silver prongs facing you) to turn the meter on.
Apply blood sample to thechannel on either side of
the test strip. Wait for the channel to fill.| The channel turns red and the
meter counts down from 5 to 1.
View your reading0
Your reading appears on the display. The Range Indicator arrow points to the blue, green, or red Range Indicator colour bar, to let you know your reading is below, within, or above your range limit.
Optional: Connect to a mobile device
Your meter comes with Bluetooth® technology. This allows you to wirelessly
send your readings to a mobile device such as a phone or a tablet, where you
can view and graph them.
To learn more about using your meter’s wireless feature and view a complete
listing of compatible devices and software applications, visit us at
www.OneTouch.ca.
Connecting your meter
Press and at the same time to turn the Bluetooth feature on and off. When
prompted by your mobile device, enter the PIN shown on your meter into your
device.
Meter symbols
| Meter power| **| Bluetooth® feature on
---|---|---|---
| Low battery| | History Mode (past readings)
| Battery empty| | Apply sample
| Control solution| | Range Indicator arrow
| Syncing| SET**| Setting mode
About the Range Indicator
Your meter comes with a Range Indicator that automatically lets you know if
your reading is below, above or within your range limits. The high and low
range limits used by the Range Indicator are pre-set as follows:
For details about changing the pre-set range limits to suit your needs, refer
to your Owner’s Booklet.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by LifeScan Europe is under
license. Other trademarks and trade names are those of their respective
owners.
Contact the OneTouch® Customer Care Line at 1 800 663-5521, Monday-Friday,
9am-8pm Eastern,
6am-5pm Pacific, or visit www.OneTouch.ca.
Manufactured by: LifeScan Europe GmbH
Dammstrasse 19
6300 Zug
Switzerland
Consult instructions for use.
Meter Made in China
OneTouch®
Rev. Date: 01/2023
© 2018–2023 LifeScan IP Holdings, LLC
AW 06933305A
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>