CONAIR 2015G Gold Plated Hot Brush Instruction Manual
- June 6, 2024
- ConAir
Table of Contents
CONAIR 2015G Gold Plated Hot Brush
IMPORTANT SAFETY INSTRUCTIONS
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE
TAKEN, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING APPLIANCE KEEP AWAY FROM WATERDANGER – TO
REDUCE THE RISK OF ELECTRIC SHOCK: ALWAYS UNPLUG THIS APPLIANCE FROM THE
ELECTRICAL OUTLET BEFORE CLEANING.
WARNING
TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR INJURY TO PERSONS:
- Unplug from outlet before putting on or taking off parts.
- This mirror should not be used by or near children or individuals with certain disabilities.
- Use this mirror only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
- Never operate this mirror if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the mirror to a service center for examination and repair.
- Keep the cord away from heated surfaces.
- Never drop or insert an object into any opening.
- Do not use outdoors.
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
- To disconnect, turn all controls to the OFF position, then remove plug from outlet.
- Do not leave appliance unattended when it is plugged in.
- Be sure mirror is not in a position where it can reflect sunlight; reflected sunlight can cause fire.
- Do not use on a soft surface such as a bed, where openings may be blocked.
- Turn switch to OFF position, allow unit to cool and unplug cord before replacing light bulbs.
- Do not place or store appliance where it can fall or be pulled into a tub or sink.
- If an appliance falls into water, unplug it immediately. Do not reach into the water.
- To protect against electrical hazards, do not use while bathing or in the shower.
OPERATING INSTRUCTIONS
This appliance is intended for household use. Use on Alternating Current (60
hertz) only. This unit is designed to be operated at 120 volts AC.
This appliance has a polarized plug (one blade is wider than the other). As a
safety feature, this plug will fi t in a polarized outlet only one way. If the
plug does not fi t fully in the outlet, reverse the plug. If it still does not
fi t, contact a qualifi ed electrician. Do not attempt to defeat this safety
feature.
GETTING STARTED
The appliance’s 30 temperature settings and in-stant heat technology combine
to provide styling versatility for all hair textures. If you have fi ne hair, a
low temperature will provide the best re-sults. If you have thick, wavy or
coarse hair, keep the heat setting high. You can vary the appliance’s
temperature according to your particular need!
Plug the appliance cord into any household outlet (120V). Press power ON/OFF
button. Red light will blink until it reaches desired temperature setting and
then becomes solid. To activate Turbo Heat®, press Turbo ON/OFF button and
green light will go on and increase straightening comb temperatures up to
20°C/36°F. To turn off, press power ON/OFF button again until red light goes
out. Never leave your appliance on and unattended. However, should you fail to
turn the unit off, it will shut itself off automatically within 60 minutes.
SUPER STYLING GUIDE
Your best looks begin with a good haircut that’s well maintained. Always treat
hair right with supe-rior quality shampoos, conditioners, and fi nishing
products.
CURLING BASICS
- Plug the hot brush cord into a standard household electrical outlet (120V). When the red ready dot has turned white, the proper styling temperature has been reached. The hot brush has 30 heat settings – HIGH settings are for use on thick, wavy hair; MEDIUM settings are for use on normal hair; LOW for dry or chemically treated hair.
- Use of the hot brush is very easy to master. Roll one section of hair at a time around the hot brush from the bottom up. TO AVOID TANGLING, NEVER ROLL THE HAIR AROUND THE HOT BRUSH MORE THAN TWO TIMES. When hair is warm (not hot) to the touch, the curl is set. For hair that is harder to curl, leave the hot brush in place a little longer. A hot brush generally gives a lighter curl than a curling iron – for very hard-to-curl hair, try switching to your curling iron.
- The hot brush can be used for quick touch-ups without shampooing. After heating the hot brush, simply brush the hair back to its original style. To change the style, mist the hair lightly with water before using the hot brush. No combing is necessary!
NOTE: Please refer to the temperature setting guide for heat settings.
NOTE: Do not use this styling appliance on hair extensions.
For faster styling results, we have added a unique optional Turbo Heat® ON/OFF feature. Press the Turbo Heat® button to deliver up to 20°C/36°F more heat in the highest setting, for maximum styling performance.
Temperature Setting Guide
Temp. Setting | Hair Type |
---|---|
Low 1–5 | Delicate, thin, easy-to-style hair |
Med. 6–10 | Average to thick or treated hair |
Med.- High 11–15 | Thick or wavy hair |
High 16–20 | Hard-to-style hair |
Maximum 21–30 | Very resistant hair |
Turbo Heat® | Up to 20°C/36°F burst of heat for difficult styling spots |
WARNING: The barrel will get very hot within a few seconds and should not be placed in contact with the skin after the curling iron is turned on. Always do a test curl before using the curling iron to ensure the proper setting for your hair type.
USER MAINTENANCE
Your styling tool is virtually maintenance free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, allow to cool and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.
CAUTION
NEVER allow the power supply cord to be pulled, twisted, or severely bent.
Never wrap the cord tightly around the appliance. Damage will occur at the
high flex point of entry into the appliance, causing it to rupture and short
circuit. Inspect the cord frequently for damage. Stop use immediately if
damage is visible or if unit stops or operates intermittently.
STORAGE
When not in use, your appliance is easy to store. Allow appliance to cool,
then simply store out of reach of children in a safe, dry location. Do not
jerk or strain cord at plug connections. Do not wrap the line cord around the
appliance. Allow the cord to hang or lie loose and straight at the point of
entry into the appliance.
TO STRAIGHTEN
To straighten hair, pull small section taut, then pass brush over hair from
roots to ends. Repeat procedure until natural waves are relaxed.
TO WAVE
For flowing waves, separate a wider section of hair than you normally do for
curling, and roll it as you usually do. For best results, hair should be at
least 6–8 inches long.
ON BLUNT CUTS
Use hot brush on blunt cuts to eliminate kinks or unwanted fl ips by just
turning the hair under.
FOR TOUSLED HAIR
Create soft, tousled waves by curling each hair section in a random direction.
Then, turn head upside down, shake, and gently scrunch hair with fingers.
Bring head back to position and repeat for fullest volume.
WIDE WAVES
Pick up a section of hair and place the hot brush under it close to the
scalp, making half a turn downward. Remove the hot brush. Working with the
same hair section, start where you left off and place the hot brush on top of
the hair, curling it up half a turn. Proceed down the same hair section,
alternating the curl upward and downward. Repeat procedure with remaining
sections of hair. For best results, hair should be about 6–8 inches long.
WARNING:
IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are a dangerous combination. But did
you know that an electric appliance is still electrically live even if the
switch is off? If the plug is in, the power is on. So when you are not using
your appliances, keep them unplugged.
ALWAYS UNPLUG SMALL APPLIANCES
LIMITED TWO-YEAR WARRANTY
(U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your unit free of charge for 24
months from the date of purchase if the appliance is defective in workmanship
or materials.
To obtain service under this warranty, return the defective product to the
service center listed, together with your purchase receipt and $7.50 for
postage and handling. California residents need only provide proof of purchase
and should call 1-800-3-CONAIR for shipping instructions. In the absence of a
purchase receipt, the warranty period shall be 24 months from the date of
manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE
LIMITED IN DURATION TO THE 24-MONTH DURATION OF THIS WRITTEN, LIMITED
WARRANTY. Some states do not allow limitations on how long an implied warranty
lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUEN-
TIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED,
WHATSOEVER.
Some states do not allow the exclusion or limitation of special, incidental,
or consequential damages, so the above limitation may not apply to you.
This warranty gives you specifi c legal rights, and you may also have other
rights, which vary from state to state.
BEAUTY TIPS:
To achieve the looks you love and for more great Infi nitiPRO by Conair®
products, visit: infi niti.conair.com
Please register this product at:
www.conair.com/registration
Service Center
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
©2016 Conair Corporation
150 Milford Road, East Windsor, NJ 08520
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
For information on any Conair or InfinitiPRO by Conair product, call
1-800-3-CONAIR or visit us at:
www.conair.com/infiniti
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>