MONSTER MTH9-1001-BLK HDTV Wireless Headphones Kit User Manual
- June 6, 2024
- Monster
Table of Contents
MONSTER MTH9-1001-BLK HDTV Wireless Headphones Kit User Manual
Introduction
This HDTV Wireless Headphones Kit with Bluetooth® Audio Transmitter and Bluetooth® Headphones conveniently streams audio from TV’s and gaming systems to Bluetooth® headphones, soundbars or speakers up to 33ft away.
Features
- Add Bluetooth audio capability to your TV or home stereo
- Stream audio up to 33ft
- Watch TV without disturbing others
- Easy installation and pairing
What’s Included
- Bluetooth Audio Transmitter
- Bluetooth Headphones
- 3.5mm Aux Cable – 1.5ft (0.5m)
- Micro USB Charging Cable x2 – 3ft (1m) each
- USB Wall Charger
- Self-adhesive Transmitter Mount
- User Manual x1 pc
Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s warranty or authority to operate the equipment. Risk of explosion if the battery is replaced by an incorrect type. Wall mounting height is less than 2M.
Controls, at a Glance
Get Started
Bluetooth Transmitter
Bluetooth Headphones
STEP 1: Charge
For best performance, it is recommended to fully charge both devices before the first use (estimated charge time: 3hrs each)
Using included (or any) micro USB cable and USB power source, charge both your Monster Bluetooth Transmitter and Monster Bluetooth Headphones until full.
LED charging indicator (next to the USB port) Solid RED – charging / GREEN –
fully charged
LED indicator (next to the USB port) Solid RED – charging / OFF – fully
charged
STEP 2: Install the Bluetooth Transmitter
Note: The Transmitter includes an optional, peel-and-stick mounting bracket that can conveniently attach it to the back of your TV.
Connect the Transmitter to an audio source, like a TV or home stereo, using
the 3.5mm audio jack and the included 3.5mm Aux Cable. Be sure that it is
connected to the AUDIO OUTPUT jack of the audio source, not an input.
Note: After connecting the Transmitter, you may need to adjust your TV’s
audio output to select the 3.5mm output.
For prolonged use in this location, connect the transmitter to one of your TV’s USB ports, or a separate USB power source, using the USB cable.
Turn on the Transmitter by switching the power switch on the side to the “ON” position. The Bluetooth LED indicator will illuminate solid blue.
STEP 3: Auto Pair the Bluetooth Headphones
Press+Hold the Multifunction Button on the Headphones for 3 seconds to turn on the Bluetooth headphones, you will hear a 3-note chime indicating that it has turned on.
The LED indicator with begin quickly flashing red and blue indicating it has entered Auto Pairing Mode. The Headphones and the Transmitter will automatically pair with each other. You will hear a 2-note chime indicating that they have paired successfully and the LEDs will pulse blue.
Bluetooth indicator (on the button)
Solid Blue – ready to pair / BLUE slow flash – paired
LED indicator (next to the USB port)
RED&BLUE fast flash – pairing / BLUE slow flash – paired
Note: Auto Pair should take no more than 5 seconds to complete. If you have not heard the 2-note chime indicating pairing success, Press the button on the Transmitter ONCE. DO NOT press+hold this button as it may reset the device.
Pairing with Other Devices
For info on manually pairing the Transmitter to a different Bluetooth Audio Device, like earbuds or speakers, or manually pairing the Headphones to a different Bluetooth Audio Source, like a tablet or phone.
Pairing To Other Devices
Note: The headphones and transmitter can each only connect to one device at a time.
Manually Pair the Transmitter to a different Bluetooth Audio Device
If desired, the Transmitter can stream audio to any other Bluetooth enabled audio device, like earbuds, headphones, or speakers. Ensure the Headphones are OFF before re-pairing the Transmitter.
- To manually enter pairing mode on the Transmitter, Press the button ONCE. The Bluetooth LED indicator will flash blue quickly indicating it has entered Pairing Mode.
- Activate pairing mode on your Bluetooth audio device (follow the individual instructions for your device). The Transmitter will locate and automatically pair to the available device, allow up to 20 seconds for the Transmitter to pair.
Manually Pair the Headphones to a different Bluetooth Audio Source
If desired, the Bluetooth Headphones can be paired to any Bluetooth enabled device, like phones, tablets, or computers. Ensure the Transmitter is OFF before re-pairing the Headphones.
- Enable Bluetooth search mode on your audio device (follow the individual instructions for your device)
- Turn on the Bluetooth headphones by pressing and holding the Multifunction Button for 3 seconds, you will hear a 3-note chime indicating that it has turned on. The LED indicator will begin quickly flashing blue and red indicating it has entered Auto Pairing Mode.
- Locate and select device “MONSTER MTH9-1001” in your device’s Bluetooth list to complete pairing
Headphones Operation
-
Press+Hold the Multifunction Button for 3 seconds to turn on the Bluetooth headphones. (If the Transmitter is ON, the Headphones will automatically reconnect, you will hear a 2-note chime indicating success.)
-
Use the buttons to control your audio. You will have different controls based on what device you are connected to:
Press+Hold Button to raise the volume
Press+Hold Button to lower the volume
Press+Hold Button to raise the volume
Press+Hold Button to lower the volume
Press Button to play/pause audio and to answer/end phone calls
Press Button to change to the next track
Press Button to change to the previous track -
To power down the headphones, hold the Multifunction Button for 5 seconds, the LED light indicator will flash red 3 times and then remain off. You will hear a 4-note chime indicating that they have successfully powered off.
To Use as Wired Auxiliary Headphones:
Plug a 3.5mm audio cable into the Aux jack (additional cable not included).
The headphones will automatically switch from “Bluetooth” mode to “Auxiliary”
mode and power off to conserve battery. The Headphones do not need to be ON in
Aux mode.
Note: Volume and music control buttons on the headphones will not
function while in Aux mode
Safety Instructions
Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, this warranty is null and void.
- Keep these instructions.
- Do not drop, puncture, or disassemble this product.
- Do not expose this product to dripping or splashing of drinks or liquids of any kind.
- Avoid long exposure to direct sunlight, which may cause damage.
- Do not expose this product to open flames.
- Do not use the product in a strong magnetic field.
- Use a clean, soft cloth to clean. Do not use any corrosive cleaners/oils to clean.
- Do not attempt to repair the device or open the unit as this will void the warranty.
1 Year Limited Warranty
Scan QR code for warranty information
Customer Service
866-246-2008
[email protected]
In the event this product becomes defective, please do not return this product to your retailer.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed or mobile condition. The minimum separation
distance is 20cm.
The illustrated products and specifications may differ slightly from those supplied. The M Monster logo is a registered trademark of Monster, Inc. or its subsidiaries in the U.S. and other countries and are used under license. All other brand names are trademarks of their respective owners. Neither Jem Accessories, Inc. nor Monster, Inc. is affliated with the respective owners of their trademarks. Licensed and Manufactured by Jem Accessories, Inc. South Plainfield, NJ 07080. Made in China.