Forclover 48 Inch Wall Mounted LED Bathroom Mirror User Manual

Forclover 48 Inch Wall Mounted LED Bathroom Mirror

Product Information

Name

Model

| Wall-Mounted LED Bathroom Mirror

BM3F

---|---
Voltage| 12V 4A
Lighting Power| Max 48W
Anti-fog Power| Max 30W
Input| UL110V
Product Size| 1220×610×29.5mm (48×24×1.2 inches)
|
Frame Color| Silver
Color Temperature

Material

| White Light 6500K, Natural Light 4800K, Warm Light 3200K

Aluminium + Glass

|

Product Installation

Accessories included

Step 1. Tray installation

1. This mirror supports two wall-mounted methods, Horizontal or Vertical
2. Fix the tray to the mirror according to your actual situation

• Horizontal Screw holes located at the bottom left
• Vertical Screw holes located at the bottom right
• take off the sticker before installation
• Put the tray on and tighten with screws

Step 2. Foam pads installation

1. Paste the foam pad to the back of the mirror
2. Horizontal paste position
3. Vertical paste position

Step 3. Wall-Mounted Ways and

Situation1 Hole-free installation (Only suitable for smooth glass or tiled walls)

1. Stick the level vial closely on the hook
2. Apply nail-free glue to the back of the hook
3. Align the position and fix the hook to the wall, then wait at least 48 hours to dry the nail-free glue (better 72hrs)
4. Hang up the mirror as above demonstration and make sure the hook goes into the slot of the mirror frame

Situation2 Drilling installation

1. Use the level vial to choose a suitable location on the wall and mark it
2. Drill holes and insert the expansion tube into the hole
3. Fix the hook with screws
4. Hang up the mirror as above demonstration and make sure the hook goes into the slot of the mirror frame

Step 4. Two Ways Of Connection

1. connect to power source directly by using the plug installed
2. Through the connector provided, here is how:
   • remove the plug by pull up the buttons of the connector
   • connect the wire from your home power source to one end of the connect
   • make sure all wires settled firmly

Operating Instruction

• Turn on or off the anti-fog function
• Turn on or off the LED lights
• Touch to switch White Light / Natural Light / Warm Light
• Long press to adjust light brightness

DIMENSION

Notice

For warranty , please kindly contact us for return policy if any issues happen.

1. Please read the instructions carefully before using.
2. Make sure that your charging device is adequate for the mirror voltage rating before using.
3. Turn off the power and avoid direct sunlight if not used or stored for a long time. Far away from children’s access.
4. Please do not disassemble or remodel mirror, and keep it away from sharp things.
5. Please do not use corrosive liquids to clean the mirror.
6. Please do not violently throw, hit and rub mirror.
7. Do not approach or put the product into the fire in case of fire or explosion.
8. Please stop using it immediately if an abnormality occurs.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>