FORCLOVER MEAM-5F2836MB Anti-Fog Dimmable Wall Mounted Bathroom Vanity Mirror Installation Guide
- June 4, 2024
- FORCLOVER
Table of Contents
INSTALLATION
RECA-W5FM2432/2436/2836/4024/4832/6028/7236
Colors/Finishes:Matte Black(MB), Gold(GD), White(WT)
LIGHTED FRAME MIRROR Lighting and Defogger
IMPORTANT SAFETY INSTRUCTIONS
When using electrical furnishing, basic precautions should always be followed, Requires two(2) people in installation.
DANGER
READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS MIRROR.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons. Use
this furnishing only for its intended use as described in these instructions.
Do not use attachments not
recommended by the manufacturer. Never drop or insert any object into any
opening. Do not use outdoors.
WARNING
Risk of electric shock. Connect this furnishing to a properly grounded circuit
only. See Grounding instructions.
GROUNDING INSTRUCTIONS:
WARNING
This product must be connected to a grounded metal, permanent wiring system,
or an equipment-grounding conductor must be run with the circuit conductors
and connected to the equipment-grounding terminal or lead on the product.
An Electrical option cabinet must be wired to a 20 Amp GF (Ground Fault
Interrupter) protected circuit when used in bathrooms and all other locations
required by the National Electric Code.
NOTE: To ensure the normal use of product, it is required to set out wires as per the regulations of IEE. The product is only applicated to indoor installation. The installation must be executed by a professional electrician, wrong installation may lead to product damage and personal injury.
TOOLS REQUIRED FOR ASSEMBLY
PARTS INCLUDED
NOTE: Determine overall mirror dimensions before proceeding to
installation.
*All dimensions & specifications are approximate and subject to change without notice.
»Accessories and parts may vary from the picture above.Depends on the product
model and size.
ELECTRIC CONNECTIONS
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN
WARNING: Shut off power before wiring the mirror.
WARNING: An Electrical option mirror must be wired to a 20 Amp GFI
(Ground Fault Interrupter) protected circuit when used in bathrooms and all
other locations required by the National Electric Code.
WARNING: This mirror must be connected to a grounded, metal permanent
wiring system or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment grounding terminal or lead on the
mirror.
CAUTION: Requires 120 VAC 20 Amp GFI protected circuit.
Electric wiring: Be sure to provide enough wire to make the proper and safe connection to the Field/Power.
-
5mm copper free silver mirror » High output LED lighting:
CRI 90+, 3000-6000K CCT, IP44 -
Color Temperature changing touch switch for surface LED
-
Vertical and horizontal mount options
-
Defogger
INSTALLATION INSTRUCTIONS
-
PLACEMENT
Select the desired position of the mirror. Level and mark the location. (vertical and horizontal mounting options)
-
SUPPORT LOCATION
Measure the hanging bar holes and mark the -
INSTALL SCREWS
Using a drill, make holes on a solid wall, and fill them with supplied plugs and screws into hanging bar holes tightly. -
POWER OFF
Please turn off all the power before the mirror wires connect. -
CONNECTION
Use the wire connector to connect to the external power supply, and push the power where wires s into the junction box.
-
Turn on the power
Hang up the mirror stable then turn on the power.
Warning: Strip wires to a suitable length. DO NOT connect the hardwire to a plug & socket outlet
FINAL ASSEMBLY
How to use Defogger Switch and Dimmer Switch:
Left touch Senor
ON/OFF Anti-fog(The defogger power will automatically turn off after an hour)
Right Touch Sensor
ON/OFF Lighting
Quick Tap-tap(two times) light color change, brightness control by holding
“Switch” sign
OPERATION
- Touch the sensor button to turn ON the light. Quick tap-tap twice to change the light temperature from 3000K to 4000K to 6000K.
- Touch and hold the Light ON sensor button to dim the light. Release the button when the light reaches the desired brightness setting.
- Touch the sensor button to turn OFF the light. The mirrors are equipped with a memory feature to preserve the previous brightness setting.
*Suggestion: Turn off the mirror power supply if you don’t use it for a long time.
WARNINGS:
- Please do not use if you found the mirror has been broken.
- Never put any sharp or heavy material on the mirror surface, otherwise the glass mirror will be broken and body injury accidents may occur.
- Turn off the power switch in storm or lightning weather to avoid electric parts damage.
Use and Maintenance:
CAUTION:
USE
| 1. To avoid damage, do NOT knock the mirror with any hard objects;
---|---
CLEANING
| 2. Do NOT clean the mirror with caustic cleaner. Do NOT wipe the mirror
with Bristle brush;
---|---
MAINTENANCE
| 3. For daily maintenance, please use soft cloth and mild cleaner to clean
the mirror.
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>