SCARLETT SC-VC80RW01 Vacuum Cleaner Instruction Manual

SCARLETT SC-VC80RW01 Vacuum Cleaner

DESCRIPTION

1. Body
2. Control button
3. Indicator light
4. Upper cover
5. Upper cover hand
6. Adapter plug outlet
7. Anti-drop sensor
8. Front small wheel
9. Battery cabinet
10. Intake
11. Side brush holes
12. Inner dust bin
13. Filter
14. Rechargeable battery
15. Adapter and power cord
16. Side brushes 4 pcs.
17. Base

INSTRUCTION MANUAL IMPORTANT SAFEGUARDS

• Read this instruction manual carefully to prevent any unit damage or injure when using.
• When using this appliance, basic precautions should always be followed:
• Before the first use of the appliance check that the voltage indicated on the rating label corresponds to the mains voltage in your home.
• For home use only. Do not use for industrial purposes.
• To reduce the risk of electric shock, do not use outdoors or on wet surfaces. Do not immerse unit or cord in any liquids.
• To avoid deforming of plastic components of the appliance or fire accident, never leave the appliance exposed to direct sun light or near any heater.
• The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by responsible person.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Сleaning and user maintenance shall not be made by children without supervision.
• Children must be under control in order not to be allowed to play with the appliance.
• Never use the vacuum cleaner without filters.
• Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
• If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
• In case of power cord is damaged, its replacement should be done by the manufacture or service department or the other high-skill person to avoid any danger.
•  The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.
•  Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the following format XX.XXXX where first two figures XX is the month of production, and following four figures XXXX is the year of production.
• Use this product in temperature from +5 °С to +40 °С
• Do not sit on top of this product or attach an object on the top of it. Beware of children or pets while the product is in operation.
• Never use the product to clean up combustible or highly volatile liquids such as gasoline.
• While the product is in operation, make sure all doors leading outside are closed.
• Charging adaptor is for indoors use only.
• Do not recharge the product if the battery cord or plug is damaged.
• Never touch the charger, plug or cable with damped hands.
• Please take out the battery when it is not in use for a long time.
• The battery is to be disposed of safety
• The appliance should be used only with the power supply supplied with the appliance.
• The instrument must be powered only by a safe, ultra-low voltage marked on the instrument.

RECHARGING BATTERY

• Connect the power adapter directly to the machine and output.

• Fill the robot for 12 hours when charging for the first time.

• For daily using, store the machine on the charging stand and ensure that the charging stand is powered on.

• If the machine is not used for a long time, charging the machine
  FULLY,TURN OFF THE MACHINE, AND STORE IT IN A DRY AND VEN LATED PLACE.PREPARATION

• Mini Robotic Vacuum Cleaner is equipped with functions suitable for cleaning up floor surfaces of home and office, such as wood, tile, and linoleum

• Please remove foam packing before start using.

• The device is not suitable for plush/deep-pile carpets.

• Clear up all items lying around the room that could catch in the brushes or nozzle or which could obstruct the device while cleaning. Be particularly sure to not leave anyplastic bags on the floor.

• Make sure that the device is not able to come into contact with cables, cords or tassels, e.g. of curtains, table cloths or carpets. If necessary, fold the edges of carpets with tassels under the carpet.

• Remove all items that could be knocked over (e.g. vases, small lamps, decorative items).

• There should be at least 40 cm of distance between two objects (e.g. wall and shelf) in order for the device to pass through.

• The device could get stuck under pieces of furniture if it does not have the necessary clearance. Block the path e.g. with flower pots that are heavy enough to prevent being knocked off

• Put side brush at its place on the bottom and then push to fix it. And vice visa—to pull up, side brush will be taken out.
  NOTE

• The brushes are not suitable for long-pile carpets

MAINTENANCE

CONTROL BUTTONS

POWER BUTTON

• This button is used to turn the device on or off, as well as to switch to standby mode.
• Press the on/off button, the vacuum cleaner will enter standby mode. Press the button again and the device will start moving automatically. If you do not perform any actions for 5 seconds, the device will turn off.

RECHARGE BUTTON

• To direct the device to the base for charging, press this button.

Application setup

• Make sure your smartphone or tablet is connected to 4G Wi-Fi Internet.
• Make sure your smartphone or tablet runs on iOS 8.0 (or higher) or Android 4.4 (or higher).
• Make sure your router’s signal is within 2.4 GHz range.
• Make sure your smartphone and robot vacuum cleaner have WLAN signal.
• Make sure robot vacuum cleaner is fully charged and base is connected to the network.
• Scan the below QR-code to download and install “Smart Life” application.https://smartapp.tuya.com/smartlife
• Open the application and sign in.
• Add device by searching “Robot vacuum cleaner” icon.
• When device in standby mode, press and hold the return to base button on vacuum cleaner for 3 seconds.
• When the device sounds “beep” for 2 times, release it. The light indicator will flash when enters network configuration mode.
• Select your Wi-Fi network and enter your Wi-Fi password.
• After successful vacuum cleaner adding to application, you can control the device with your smartphone.
• If you have problems with application installing or device connecting to app, please refer to the “Frequently asked questions” section in the app.

Power Off Button

• Press “Power Off” Button, to turn off the robot.
  Stand by

• Press the “standby», pause the robot into standby mode
  Auto Button

• Press “Auto”, buzzer rings once, the robot will enter to auto cleaning mode.
  Edge Button

• Press “Edge», buzzer rings once, the robot will enter to edge cleaning mode to clean along the edge of the wall.
  Spot Button

• Press “Spot” button, buzzer rings once, the robot will enter to spot cleaning mode to start cleaning specific areas.
  Auto Charging Button

• Press “Auto Charging”, buzzer rings once, enter to auto recharging mode.
  Manual mode (You can choose to withdraw)

• Press manual button into human operation
  Start/Pause

• To start cleaning.

• To stop current cleaning mode.
  Direction button

• The robot will move according to selected direction (press the let/right for once, choose the direction you want robot move, then press the forward/back)
  Schedule Button

• Press “Add Schedule”, enter schedule page to set a cleaning time.

• Select a time you wanted and save it.

• Click “save” on the top right corner.

• Click “√’ to cancel the schedule.

Operation

• To start working, presss the power button on the device for more than 3 seconds. The device will turn on and go into standby mode. If you click the power button again, the device will start working automatically.

• Without connecting Wi-Fi, the device is in standby mode for more than 5 minutes, it will automatically turn off;

• With Connecting Wi-Fi, the device will not automatically turn off even if the device is in standby model for more than 5 minutes.

• To force the device to turn off, press the power button again.

• To send the device to the base for recharging, press the return to base button on the device.
  CLEANING BRUSHES

• The debris that has stuck to the brushes and the hair that has wound up must be removed from time to time. It is recommended to clean them after 4-5 cycles of operation.

• Turn off the appliance. Gently clean the rotating brushes with the hard end of the cleaning brush that comes with the kit.

DUST BIN CLEANING

• Pull up the upper cover directly.

• Take out the dust bin out of the vacuum cleaner.

• Open the lid of dust bin by putting your finger into the dust bin groove and gripping to take it out

• Take out the inner filter

• Empty the dirt in the dust bin

• Rinse the dust bin with tap water. Do not wash it in washing machine, dish-washing machine or other machine.

• Periodically clean the filter with a soft bristle brush.

• Reinstall the filter and the dust bin lid once they get dried.

• Put back the dust bin into the cleaner
  ATTENTION:

• After repeated use for some time, dirt and dust might accumulate around the intake of the product, to ensure its best cleaning efficiency and constant airflow it should be cleaned periodically Vacuum cleaner or cord should never be immersed into water or any liquids.

• WARNING!

• Be sure to clean the container after each cleaning.

• Never use the vacuum cleaner without installed filter and with damaged or dirty filter. Otherwise, dust will fall into the motor and cause damage to the vacuum cleaner.

• Don’t use the vacuum cleaner if the container is filled to the mark “MAX”. When the container is filled, dirty air clogs up the vacuum cleaner filter and the engine can overheat and disable.

• Don’t use the vacuum cleaner for cleaning of material debris such as cement, whitewash, plaster, metal shavings and etc. These particles cause to the engine damage.

• Don’t wash vacuum cleaner parts in a dishwasher or a construction machine.

BATTERY REMOVAL

• The battery must be removed from the appliance before its disposal.
• When removing the battery, the appliance must be disconnected from power supply.

STORAGE

• Fulfil all the steps from parts CARE AND CLEANING.
• Store the unit in dry cool place or in the original box.

TROUBLESHOOTING

If all solutions given above don’t work for you, please re-set the robot by switching on the power button

2.  Main body is picked up

| 1.  Recharge the battery

2.  Re-place the robot on the floor

Vacuum on but can not collect dirt and hair| 1.   The dust bin is full

2.   The filter is not installed correctly

| 1.   Clean the dust bin

2.   Re-install the filter correctly

The product is moving backwards after being started| 1.   The product is on dark color floor

2.  Anti-drop sensor light

was    covered

| 1.   Put the robot on light color floor.

2.   Clean anti-drop sensor light.

LED indicators flash in blue after 2hrs charging| Power supply might been cut off during charging| The robot can be operated if the battery has been fully charged for 2hrs
---|---|---
The side brushes crooked, not good to sweep| Being used for a long time| If it becomes crooked, please scald it in hot water to recover it to its original shape

The product cannot start

| 1.   Battery is not installed properly

2.   Battery low

3.   The robot is under protection status

| 1.   To install the battery correctly

2.   To have the battery fully charged(turn off the cleaner first)

3.   To re-set the robot

The symbol on the unit, packing materials and/or documentation means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point.
The symbol on the unit, packing materials and/or documentation means the battery used in this product not be toss in the garbage with ordinary household garbage.
For additional information about actual system of the garbage collection, address to the local authority.
Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.

References

• Scarlett
• Scarlett
• Smart Life
• Dictionary

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>