Tg Brother Christmas Gift HX433RF Remote Control User Manual
- June 5, 2024
- Tg Brother Christmas Gift
Table of Contents
Brother Christmas Gift HX433RF Remote Control
User Manual
Instructions for remote control
Please read the following carefully to ensure the satisfactory and safe
operation of this remote control.
CAUTION:
Replace only with a “CR2025” type cell battery
Non-rechargeable batteries are not to be recharged.
Ensure the batteries are installed correctly with regard to polarity(+ and -)
Do not dispose of batteries in fire, batteries may leak or explode.
Please remove batteries if consumed or if the product is to be left unused for
a long time.
Please clean the battery contacts and those of the device prior to the battery
installation.
Replace batteries ensuring proper polarity.
Batteries should be recycled or disposed of according to the manufacturer’s
instructions and following state and local guidelines.
Remote Control Trouble Shooting
- If the remote control doesn’t work, please make sure that the plastic sheet used for battery isolation purposes is pulled out.
- The remote needs a direct line of sight with the receiver and has to be in close range. It’s better to operate remotely from a distance of less than 10 M.
- If it still has no function, please replace the button battery “CR2025” with a new one.
- DETAILS OF PRODUCTS&REMOTE CONTROL FUNCTIONS
DETAILS OF PRODUCTS &REMOTE CONTROL FUNCTIONS
FADE| RED| FRESH THE FADE TO SWITCH COLORS
GREEN
PURPLE
BLUE
YELLOW
WHITE
WARM WHITE
MULTI
RED BLUE WHITE
TWINKLE| STEADY RED WITH COOL WHITE LED FLICKERING| PRESS THE TWINKLE TO
SWITCH COLORS
---|---|---
STEADY GREEN WITH COOL WHITE LED FLICKERING
STEADY PURPLE WITH COOL WHITE LED FLICKERING
STEADY BLUE WITH COOL WHITE LED FLICKERING
STEADY YELLOW WITH COOL WHITE LED FLICKERING
STEADY COOL WHITE WITH COOL WHITE LED TO FLICKERING
STEADY WARM WHITE WITH COOL WHITE LED TO FLICKERING
STEADY MULTICOLOR WITH COOL WHITE LED FLICKERING
STEADY RED/BLUE/COOL WHITE WITH COOL WHITE LED FLICKERING
FLASH| STEADY RED WITH RED LED FLICKERING| PRESS THE FLASH TO SWITCH
COLORS
STEADY GREEN WITH GREEN LED FLICKERING
STEADY PURPLE WITH PURPLE LED TO FLICKERING
STEADY BLUE WITH BLUE LED TO FLICKERING
STEADY YELLOW WITH YELLOW LED FLICKERING
STEADY COOL WHITE WITH COOL WHITE LED TO FLICKERING
STEADY WARM WHITE WITH WARM WHITE LED FLICKERING
STEADY MULTI WITH MULTI LED FLICKERING
STEADY RED/BLUE/COOL WHITE WITH
RED/BLUE/COOL WHITE LED FLICKERING
DUAL| STEADY GREEN WITH RED LED FLICKERING| PRESS THE DUAL TO SWITCH
COLORS
STEADY COOL WHITE WITH BLUE LED TO FLICKERING
STEADY COOL WHITE WITH RED LED FLICKERING
STEADY GREEN WITH BLUE LED TO FLICKERING
| STEADY RED WITH YELLOW LED FLICKERING|
---|---|---
STEADY PURPLE WITH BLUE LED TO FLICKERING
STEADY COOL WHITE WITH MULTI LED FLICKERING
CHASING| COLOR GRADIENT| RED – ORANGE – YELLOW – GREEN – TURQUOISE-
BLUE- PURPLE – WHITE THEN FADE BACK TO RED| FROM SLOW TO FAST PRESS THE
CHASING TO SWITCH FUNCTIONS
MULTI-COLORED FLASH
RED, GREEN, AND WHITE FLASHING
RED, BLUE AND WHITE FLASHING
STEADY| STEADY RED| PRESS THE STEADY TO SWITCH COLORS
STEADY GREEN
STEADY PURPLE
STEADY BLUE
STEADY YELLOW
STEADY COOL WHITE
STEADY WARM WHITE
STEADY MULTI
STEADY RED/BLUE/COOL WHITE
JUMP| RED FLICKERING| PRESS THE PUMP TO SWITCH COLORS
GREEN FLICKERING
PURPLE FLICKERING
BLUE FLICKERING
YELLOW FLICKERING
COOL WHITE FLICKERING
WARM WHITE FLICKERING
MULTI FLICKERING
RED/BLUE/COOL WHITE FLICKERING
WAVE| RED SHIMMERING| PRESS THE WAVE TO SWITCH COLORS
GREEN SHIMMERING
PURPLE SHIMMERING
BLUE SHIMMERING
YELLOW SHIMMERING
COOL WHITE SHIMMERING
WARM WHITE SHIMMERING
MULTI SHIMMERING
RED/BLUE/COOL WHITE SHIMMERING
MARQUEE| RED FLICKERING| PRESS THE MARQUEE TO SWITCH COLORS
---|---|---
GREEN FLICKERING
PURPLE FLICKERING
BLUE FLICKERING
YELLOW FLICKERING
COOL WHITE FLICKERING
WARM WHITE FLICKERING
MULTI FLICKERING
RED/BLUE/COOL WHITE FLICKERING
COMBE| FADE| FUNCTION CYCLE IN FADE| PRESS THE COMBE TO SWITCH FUNCTIONS
TWINKLE| FUNCTION CYCLE IN TWINKLE
FLASH| FUNCTION CYCLE IN FLASH
DUAL| FUNCTION CYCLE IN DUAL
CHASING| FUNCTION CYCLE IN CHASING
JUMP| FUNCTION CYCLE IN JUMP
WAVE| FUNCTION CYCLE IN WAVE
MARQUEE| FUNCTION CYCLE IN MARQUEE
AUTO| PRESS AUTO TO AUTOMATICALLY CYCLE ALL FADE TWINKLE FLASH DUAL
CHASING FUNCTIONS
ON/OFF| TAP TO SWITCH ON/OFF
Specification
Areas of application
The remote control the LED light.
Technical parameters:
Use a 3.0V button battery to load the remote.
Working frequency:| 434.0595MHz
Standby current:| 0MA
Working current:| > 20MA
Transfer rate:| < 10 KBPS
Modulation mode:| ASK (amplitude modulation)
Working temperature:| – 10 ℃ ~ +40 ℃
Tips: With the power switch, the remote control can turn off the power to
save electricity when not in use.
FCC Statement This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>