THERMCO PRODUCTS ACCD0974IR Hands-Free Wall Mount Automat Forehead IR Thermometer with Alarm User Guide

THERMCO PRODUCTS ACCD0974IR Hands-Free Wall Mount Automat Forehead IR Thermometer with Alarm User Guide

Introduction

Display Description

1. Working mode: count mode, body temp, surface temp.
2. Status indication: expression,USB connection status, volume, power.
3. Measurement result: temperature value or count value.
4. Temperature unit: Celsius or Fahrenheit.
5. Setting item or historical record: M indicates the current historical record number; F indicates the setting item number.
6. Calibrated.
7. It will shows History temp or Environment temp.
8. Environment temperature.

State description

1. .Standby: The backlight is turned off and the temperature remains displayed (Fig.1)
   

2. Insufficient power: The display indicates that the battery is empty and the icon flashes. **(Fig.2)

**

3. .Normal temperature: Flashing green lights on both sides. **(Fig.3)

**

4. Abnormal temperature: Flashing red lights on both sides. **(Fig.4)

   ---

5. Out of range(in body mode)
   ‘Lo’: Ultra-low temperature than 35 degrees Celsius (Fig.5)
   
   Hi’: Ultra-high temperature than 42 degrees Celsius (Fig.6)
   

Operation Instruction

1. Temperature measurement: Front of the thermometer, approach it within 5-30cm (Fig.7)
   

2. Historical temperature query:
   In the working mode, press the left and right buttons to query the historical temperature, M” represents the current historical temperature. The device currently supports up to 99 historical temperatures.

3. Temperature unit switching:
   In the working mode, press the SET button once to (Fl). The temperature unit Is switched. Press the left and right buttons to switch between Celsius and Fahrenheit. r:Celsius F:Fahrenheit

4. Mode switching:
   Press the SET button twice in the working mode to (F2).The working mode is switched. Press the left and right buttons to switch the working mode. Body temp: body mode, Surface temp: Surface mode.

5. Alarm temperature setting:
   Press the SET button 3 times in the working mode to (F3Llt is the alarm setting state of the body mode. Press the left and right buttons to switch the alarm  temperature between98.6-100.4. The default is 99.1 degrees Fahrenheit.
   Note: The alarm value is only valid in the body mode, there is no alarm temperature in the surface mode and count mode.

6. Volume setting:
   In the working mode, press the SET button 4 times to ( F4). It is the volume setting state. Press the left and right buttons to adjust the volume. The more parentheses behind the small speaker, the greater the volume, and the disappearance of the small speaker represents mute.

7. Backlight setting:
   Press the SET button 5 times in the working mode to (F5). It is the backlight setting state. Press the left and right buttons to turn the backlight on or off (ON: turn on the backlight Off: turn off the backlight

8. Language setting:
   In the working mode, press the SET button 6 times to (F6). It is the language setting state Press the left and right buttons to switch the language of the voice broadcast. CH stands for Chinese and EN stands for English
   Note: the language displayed can not be changed.

9. Output signal setting:
   Press the SET button 7 times in the working mode to (F7). It is the output signal setting state Press the left and right buttons to switch the output signal type. S1 represents the switch mode and S2 represents the pulse mode.

10. USB connection:
    Use Type C USB cable to connect to the computer, open the software on the computer, you can connect with the device and store the measurement results in real time. For more online instructions, please refer to the software instruction manual.

11. Battery installation and replacement:
    Open the back battery cover, remove the old battery, and install the new battery correctly according to the battery polarity.

12. install method: nail hook, bracket fixing, Adhesive fixing.

Specification

1. Accuracy: ±0.2 degrees (35~42℃, place it in the operating environment for 30 minutes before use）
2. Alarm mode: abnormal automatic alarm flash + sound alarm for about 10 seconds
3. Measuring distance: 5cm~30cm automatic measurement
4. Display: LCD display
5. Transmission interface: USB Type C
6. Power supply: 4 AA batteries(external power supply and internal power supply can be switched )
7. Install method: nail hook, bracket fixing
8. Environment temperature:10℃~40℃ (recommended15℃~35℃)
9. Measuring range: 0~50℃
10. Response time: 0.5s
11. Standby: 30s automatic standby during non-working hours
12. Input: DC 5V 500mA
13. Dimensions: 12.5cm13.8cm16.9cm
14. Counting capacity: 9999 times
15. History temperature: latest 99 temperature measured memoried
16. Signal output: (S1, Normal temperature, Output 3.3VDC， Abnormal temperature, Output 0VDC) (S2, Normal temperature, Output 3.3VDC about 100us. Abnormal temperature, Output 0VDC about 500us)

Warnings

1. It is the user’s responsibility to ensure the electromagnetic compatibility environment of the device so that it can work normally.
2. It is recommended to evaluate the electromagnetic environment before using the device
3. When changing the operating environment, the device must be left to stand for more than 30 minutes
4. Please measure the forehead to the thermometer.
5. Please avoid direct sunlight when using outdoors
6. Keep away from the air conditioner, fans, etc
7. Please use qualified and safety-certified batteries. Unqualified batteries may cause fire or explosion.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>