FORCLOVER HMRE-AL6028 LED Anti Fog Wall Mounted Bathroom Vanity Mirror Installation Guide
- October 30, 2023
- FORCLOVER
Table of Contents
HMRE-AL6028 LED Anti Fog Wall Mounted Bathroom Vanity Mirror
Installation Guide
HMRE-AL6028 LED Anti Fog Wall Mounted Bathroom Vanity Mirror
INSTALLATION
LED BATHROOM MIRROR Lighting and Defogger
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always be
followed,Requires two(2) person in installation.
DANGER
READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS MIRROR.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons. Use
this furnishing only for its intended use as described in these instructions.
Do not use attachments not recommended by the manufacturer. Never drop or
insert any object into any opening. Do not use outdoors.
WARNING
Risk of electric shock. Connect this furnishing to a properly grounded circuit
only. See Grounding instructions.
GROUNDING INSTRUCTIONS:
WARNING
This product must be connected to a grounded metal, permanent wiring system,
or an equipment-grounding conductor must be run with the circuit conductors
and connected to the equipment-grounding terminal or lead on the product.
An Electrical option cabinet must be wired to a 20 Amp GFI (Ground Fault
Interrupter) protected circuit when used in bathrooms and all other locations
required by the National Electric Code.
NOTE: To ensure the normal use of product, it is required to set out
wires as per the regulations of IEE. The prod. uct is only applicate to the
indoor installation. The installation must be executed by a professional
electrician, wrong installation may lead to product damage and personal
injury.
PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
ALL RIGHTS RESERVED
TOOLS REQUIRED FOR ASSEMBLY
PART INLUDED
NOTE: Determine overall mirror dimensions before proceeding to
installation.
All dimensions & spodticaliOnS are aCCeoxirnale and subject to change without
notes .Accessories and pans may say horn the lecithin above Depends on the
product nodal and size.
ELECTRIC CONNECTIONS
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN
WARNING: Shut off power before wiring the mirror.
WARNING: An Electrical option mirror must be wired to a 20 Amp GFI (Ground
Fault Interrupter) protected circuit when used in bathrooms and all other
locations required by the National Electric Code.
WARNING: This mirror must be connected to a grounded. metal permanent
wiring system or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment grounding terminal or lead on the
mirror.
CAUTION: Requires 120 VAC 20 Amp GFI protected circuit.
Electric wiring: Be sure to provide enough wire to make the proper and
safe connection to the Field/Power.
- Wre terminal plate is not included.
- Strip wires to a suitable length size.
- Do NOT connect to a plug & socket outlet.
MIRROR FEATURES
- 5mm copper free silver mirror
- High output LED lighting: CRI 90+, 3000-6000K CCT, IP44
- Color Temperature changing touch switch for surface LED
- Vertical and horizontal mount options
- Defogger
INTALLATION INSTRUCTIONS
PLACEMENT
Select the desired position of the mirror. Level and mark the location.
(vertical and horizontal mounting opntions)
SUPPORT LOCATION
Measure the hanging bar holes and mark the drilling locations ensure marking
are leveled.
INSTALL SCREWS
Using a drill, make holes on solid wall,and fill with supplied plugs and
screws into hanging bar holes tightly.
POWER OFF
Please turn off all the power before the mirror wires connection.
CONNECTION
Use the wire connector connect to external power supply. and pusing the power
supply wires into the junction box.
Warning: Strip wires to a suitable length. DO NOT connect the hardwire to
a plug & socket outlet
Turn on the power
Hang up the mirror stable then turn on the power.
FINAL ASSEMBLY
How to use Defogger Switch and Dimmer Switch:
Left touch Senor
ON/OFF Anti-fog(The defogger power will automatically turn off after an hour)
Right Touch Sensor
ON/OFF Lighting Quick Tap-tap(two times) light color change, brightness
control by holding
OPERATION
- Touch the sensor button to turn ON the light. Quick tap-tap twice to change the light temperature from 3000K, 4000K to 6000K.
- Touch and hold the Light ON sensor button to dim the light. Release the bottor when the light reaches the desired brightness setting.
- Touch the sensor button to turn OFF the light. The mirrors are equipped with a memory feature to preserve the previous brightness setting.
*Suggestion: Turn off the mirror power supply if you don’t use it for a long time.
WARNINGS:
- Please do not use if you found the mirror have been broken.
- Never put any sharp or heavy material on the mirror surface, other wise the glass mirror will be broken and body injury accidents may occur .
- Turn off the power switch in storm lightning weather to avoid electric parts damage.
Use and Maintenance:
CAUTION:
•USE” 1. To avoid damage, do NOT knock the mirror with any hard objects;
CLEANING
2. Do NOT clean the mirror with caustic cleaner. Do NOT wipe the mirror with
Bristle brush;
MAINTENANCE 3. For daily maintenance. please use soft cloth and mild cleaner
to clean the mirror.