RUGGED RIDGE JL 2-Door Eclipse Sun Shade Installation Guide

June 13, 2024
RUGGED RIDGE

Eclipse Sun Shade, Full; JL 2-Door

JL 2-Door Eclipse Sun Shade

RUGGED RIDGE JL 2 Door Eclipse Sun Shade - Fig Components

  1. Sun Shade (1)
  2. Mesh Storage Bag (1)
  3. Loop Strip (1)

Note: This Eclipse Sun Shade has been designed to work wtih 2 door soft top JL Wranglers. Design allows shade to remain in place with soft top closed. Eclipse Sun Shade has been supplied with a mesh storage bag. Bag and Shade can be sotred in either center console or glove box.

  1. Lower OE soft top. Refer to owner’s manual.
  2. Loosely position Sun Shade on top of sport bar with hook and loop section forward. Attaching material of hook and loop section should face downward.RUGGED RIDGE JL 2 Door Eclipse Sun Shade - Fig 1
  3. Clean center of windshield frame thoroughly with alcohol. Peel and stick Loop Strip to windshield frame avoiding contact with interior plastic panel.
  4. Attach Sun Shade hook and loop section to the attached Loop Strip.RUGGED RIDGE JL 2 Door Eclipse Sun Shade - Fig 2
  5. In an alternating pattern secure Sun Shade by looping straps around sport bar. DO NOT fully tighten at this time. Once all straps are secure, repeat pattern and pull tight.RUGGED RIDGE JL 2 Door Eclipse Sun Shade - Fig 3

On side locations, make sure straps only wrap around sport bar and not door surrounds.

Copyright © 2018 Omix-Ada®, Inc.
460 HORIZON DR. SUITE 400
SUWANEE, GA 30024
PHONE: 770-614-6101
FAX: 844-270-0593
www.Omix-ADA.comRUGGED RIDGE JL 2 Door Eclipse
Sun Shade - SymbolsPart #13579.75

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

RUGGED RIDGE User Manuals

Related Manuals