FORCLOVER HAT-A7501-BG 4-Piece Bath Hardware Set with Towel Bar User Manual
- June 4, 2024
- FORCLOVER
Table of Contents
FORCLOVER HAT-A7501-BG 4-Piece Bath Hardware Set with Towel Bar User Manual
INSTALLATION INSTRUCTIONS
INSTALLATION STEPS
-
First, Disassemble the product base and the steel gasket.
-
Mark the location of the hole on the wall according to the steel gasket.
-
Use the m6 bit to punch holes in the marked position.
-
Use the hammer to push the plastic expansion pipe into the hole.
-
Tighten the stainless steel screws with a screwdriver and fix the steel gasket.
-
Place the product base in the steel gasket position and tighten the base with a wrench.
NOTE:
- This product need to be installed on wood or cement wall, if installed on another wall , the function of the product will be affected.
- Before drilling, check whether there is power cable, communication cable or water pipe in the wall with electronic detector.
- Different wall material need to adopt different drill, rill the hole carefully.
- If you use a electric drill, please do not forget two points as follows:
- please wear protective glasses.
- Tum off the power after using the device.
CLEANING CARE
In order to keep the product surface beight, please keep ofter or regularly to
clean the product.
Wash holder with clean water ,and wipe with soft cotton cloth.
Avoid using cleaning power ,harsh cleaning chemicals ,brushes ,and cloth with
coarse surface to prevent scrtching and corrosion.
Do not use acidic cleaning agents for washing the product as it may cause
corrosion on the surfaceoffaucet in contact with harmful acidic agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>