TRAXXAS HKC23030 LED Trailer Lighting Instruction Manual

June 13, 2024
Traxxas

TRAXXAS-LOGO

TRAXXAS HKC23030 LED Trailer Lighting

Product Information

The 1/18 Utility Trailer LED Light Kit is a lighting system designed for utility trailers. It includes left and right LED tail light housing assemblies, a power wiring harness, rubber wire plugs, and a trailer hitch wire mount. The kit is compatible with the electronic control module (ECM) of the trailer.

Key Features:

  • LED tail light housing assemblies for improved visibility
  • Power wiring harness for connecting the lights to the ECM
  • Rubber wire plugs for securing the wiring harnesses
  • Trailer hitch wire mount for attaching the lights to the rear bumper

Kit contents

  • Toolbox (with LED tail lights wiring harnesses and housing assemblies)
  • 3x6mm countersunk cap screws (CCS) (2)
  • Rubber wire plugs (6)
  • Y-harness
  • Wire mount

Tools required:

  • 2.0 mm hex wrench

Installation Instructions

  • A. Feed the left and right LED tail light housing assemblies from the toolbox through the trailer frame.

  • B. Position the power wiring harness into the slot in the front of the toolbox as shown.

  • C. Place the toolbox on the trailer frame and push down until it snaps into place.

  • A. Route both LED taillight wiring harnesses through the channels in the underside of the trailer frame (see Trailer Lights Wiring Diagram). Install the housing assemblies onto the left and right tail light posts with the included 3x6mm CCS (2).

  • B. Install the supplied rubber wire plugs (6) to secure the wiring harnesses to the underside of the trailer (see Trailer Lights Wiring Diagram).

Plug the Y-harness into an open ACC port on the electronic control module (ECM). The LED lights will turn on when the ECM is powered on by plugging in the battery.
*If there are no open ACC ports on the ECM due to previously installed light kits, unplug one of the connectors from the previously installed light kit, plug that connector into the Y-harness, and then plug the Y-harness into the ECM.

Trailer Lights Wiring Diagram

Traxxas, 6250 Traxxas Way, McKinney, TX 75070,
Phone: 972-549-3000,
Fax: 972-549-3011,
e-mail: support@Traxxas.com
If you have questions or need technical assistance, call Traxxas at 1-888-TRAXXAS (1-888-872-9927) (U.S. residents only)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals