TREND BFA8400 Brella Contemporary Brushed Nickel Lighting Floor Lamp Instruction Manual
- June 3, 2024
- trend
Table of Contents
TREND BFA8400 Brella Contemporary Brushed Nickel Lighting Floor Lamp
OVERVIEW
- A. Tool
- B. Screw
- C. Washer
- D. Lamp base
- E. Joint
- F. Tube
- G. Nut
- H. Tube
- I.. Nut
- J. Tube
- K. Socket
- L. Shade
- M. Ring
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
- WARNING : Risk of Fire. Consult a qualified electrician to ensure correct branch circuit conductor. Min 90ºC supply conductors.
- Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.
GENERAL
- All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.
- Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.
ASSEMBLY AND INSTALLATION
- Carefully unpack all parts from cartons.
- Place the lamp base(D) on a flat surface
- Thread the Screw(B) up through the Washer(C) and the lamp base(D) into the Joint(E) and secure with the tool(A) until tight.
- Place the Tube(H) into the Tube(F) and fasten the Nut(G) until tight.
- Place the Tube(J) into the Tube(H) and fasten the Nut(I) until tight.
- Place the Shade(L) over the Socket(K) and secure with Ring(M) until tight.
- Install light bulb (not included) into the socket(K).
DO NOT USE BARE HANDS TO TOUCH THE BULB.
INSTALLATION IS NOW COMPLETE
Read User Manual Online (PDF format)
Loading......