TREND TF70090 Hilyte 1-Light White Floor Lamp Instruction Manual
- June 3, 2024
- trend
Table of Contents
TREND TF70090 Hilyte 1-Light White Floor Lamp
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit conductor. Min 90ºC supply conductors. Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician. Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.
ASSEMBLY AND INSTALLATION
- Assemble the lamp rod (4) to base(3) with the allen screw (2).
- Use the silicon ring(5) to secure supply wire to lamp rod(4).
- Put bottom silicon stop (6) over lamp rod(4) to adjust the height.
- Put the socket kits(7) onto the lamp rod(4), and secure with upper silicon stop (8).
- Install the bulb (9, not included) into the socket.
- Do not exceed maximum wattage recommended – Max.60W
- DO NOT USE BARE HANDS TO TOUCH THE BULB.
INSTALLATION IS NOW COMPLETE
- ALLEN SPANNER
- ALLEN SCREW
- LAMP BASE
- LAMP ROD
- SILICION RING
- BOTTOM SILICON STOP
- SOCKET KITS
- UPPER SILICON STOP
- BULB
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>