TREND TF70070 Tourer 1 Light Floor Lamp Instruction Manual
- June 3, 2024
- trend
Table of Contents
TREND TF70070 Tourer 1 Light Floor Lamp
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
WARNING:
Risk of Fire. Consult a qualified electrician to ensure the correct branch
circuit conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician. Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.
ASSEMBLY AND INSTALLATION
- Assemble the legs (1) with the Allen screw(2) and secure them with the socket kit(3).
- Assemble the shading sheet(4) and rack(5) to make a lampshade (6).
- Put the shade (6) over the socket, and secure it with the socket ring(7).
- Install the bulb (8, not included) into the socket.
Do not exceed the maximum suggested wattage – Max.60W DO NOT USE BARE HAND TO TOUCH THE BULB.
INSTALLATION IS NOW COMPLETE
PARTS ASSEMBLY
- LAMP LEG
- ALLEN SCREW
- SOCKET KIT
- SHADE SHEET
- RACK
- LAMP SHADE
- SOCKET RING
- BULB