TREND A800026-1-S Solo Crystal Pendant Light Instruction Manual
- June 3, 2024
- trend
Table of Contents
TREND A800026-1-S Solo Crystal Pendant Light
INSTALLATION
- OUTLET BOX
- WIRE CONNECTOR
- BLACK WIRE
- WHITE WIRE
- GROUND WIRE
- BOX SCREW
- MOUNTING SCREW
- HEX NUT
- MOUNTING BAR
- GROUND SCREW
- CANOPY
- BALL NUT
- GLASS HOLDER
- K9 CRYSTAL
- G9 BULB
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit conductor. Min 90ºC supply conductors. Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National
Electrical Code (N.E.C.) standards. If you are unfamiliar with proper
electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no
parts are missing by referencing the illustrations on the installation
instructions.
ASSEMBLY AND INSTALLATION
- Secure the mounting bar(9) to the outlet box(1) with box screws(6).
- Pull the outlet wire and ground wire out from the outlet box. Make wire connections with wire connectors (2)
- Black wire from light to Black wire (3) from the power source.
- White wire from light to White wire(4) from power source.
- Loop the ground wire(5) to the mounting bar(9) with a ground screw (10).
- Attach the canopy(11) against the outlet box (1). Secure with the ball nut (12) and mounting screw(7).
- Loosen the glass holder (13), and slide the crystal (14) up the cable.
- Insert G9 bulb (15, not included) into socket.
- Slide the crystal back down the cable and tighten the glass holder (13).
DO NOT USE BARE HANDS TO TOUCH THE G9 BULB.
INSTALLATION IS NOW COMPLETE