CHROMA F9 LED Color Changing Gaming Lamp User Manual
- June 6, 2024
- CHROMA
Table of Contents
CHROMA F9 LED Color Changing Gaming Lamp User Manual
Thank you for purchasing a Sheffield LABS product. All Sheffield LABS products are carefully engineered and factory tested for durability under normal conditions. We develop our products for simple installation. Follow our instructions to help you easily install your Sheffield UBS gaming lamp.
SAVE THESE INSTRUCTIONS AND READ CAREFULLY BEFORE USE
For Customer Care, production operation information or problem resolution,
call toll-free 1.800.936-3213
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To prevent electric shocL, make sure the lamp is not plugged in until all steps are complete.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS TURN LAMP OFF AND WAIT UNTIL SHADE AND ADAPTAR ARE COOL BEFORE HANDLING.
- The lamp might get hot after several hours of continuous use. D0 NOT place your hands directly on light panel.
- Never use with an extension tord unless the plug can de fully inserted into the receptacles in the extension cord.
- Do not alter the plug.
- The lamp head included with this unit cannot be replaced by the consumer.
- Do not plate flammable material near or over the lamp.
- Ensure the lamp is not installed next to any air vents and is not in any moist or damp areas.
- IN DOOR USE ONlY
NOTE: The important safety instructions appearing in this manual are not meant to cover all possible conditions and situations that may o«ur. It must be understood that common sense, caution, and care must be used with any electrical product.
CAUTION: Any change or modification to this product not expressly recognized by Enchanté Lites LLC voids Enchanté’s responsibility for proper function of product.
Product Overview
A
| Lamp Base
---|---
B
| Lamp Body
C|
Power Cord
D
| Power Adapten
E|
Remate
F|
Touch Switth
PRODUCT SPECIFICATIONS
Input
| 12V / ÍA
---|---
Color Temperature
|
3000+250K
Wave Length|
R: 620-630nm / G: 525-530nm / B: 4ó0-4ó5nm
INSTRUCTIONS
This is not fully assembled.
-
Remove the lamp from the packaging, placing the base of the lamp (A) on a firm sulace.
-
Rotate the lamp body (B) into the base (A).
-
Plug in the power adapter (D) to the power cord (t).
-
Press the touch switch (F) to turn on the warm light, the brightness is 100% when the warm light is turned on each time, press the touch switch (F) again to adjust the brightness in five steps.
-
Remote Control Operation:
-
Press 0N/0FF key(H) to turn the light on/off.
-
Press Night light key(G) to turn on/offthe night light, the brightness is 10% when the night light is on.
-
Press Warm light key(I) to turn on/off the warm light, the brightness is 100S when the light is on.
In warm light mode, press + /- key to adjust the brightness in five steps. -
Press RGB key(J) to turn on/off kGB light, tap to toggle be Meen colors(white, green, blue, orange, yellow, purple, cyan).
In RGB light mode, press +/ – toggle befi een five brightness levels. Press and hold to switch to ambient slow shifi color changing mode. In ambient mode, the brightness is not adjustable.
+ Key to increase brightness
– Key to decrease brightness -
NOTE: Night light, warm light, and RGB modes cannot all be active at the same time.
-
PRODUCT MAINTENANCE
- Always ensure the power is OFF and the lamp has cooled down before performing any maintenance, cleaning or adjustments.
- To avoid injury or damage to the lamp, ensure that the adapter and any screws are secure before reconnecting to power.
- To clean, wipe with a damp or dry clean cloth. Never soak the lamp with water.
FCC PART 15
Note: This equipment has been tested and found to comply with the limia
for a Class B digital device, pursuant to Pan J 5 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio
B frequency energy and, if not installed and used in a«ordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that the inteiference will not o«ur in a panicular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to tiy to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation beMeen the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to whith the receiver is connected.
- Consult the dealer or an experienced radio/T\/technician for help
Changes or modifications not expressly approved by the paity responsible for compliance could void the users authority to operate the equipment. This device complies with Pan 15 of the FCC Rules. Operation is subject to the following two conditions:
- this devite may not tause harmful interferente, and
- this devite must acept any interferente received, intluding interference that may cause undesired operation.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm beMeen the radiator & your body.
WARRANTY
Sheffield LABS products are manufactured under the highest quality and
workmanship standards. Sheffield LABS guarantees the original buyer that this
product will be free of fabrication, material and finish defects for one year
period starting at the purchase date.
Sheffield LABS recommends professional installation for this product.
Should this product present any leaks derived from a fabrication or material defect during the warranty period, Sheffield LABS will supply the necessary replacement parts free of charge. Sheffield LABS will also replace any pieces presenting defects in finish or fabrication. This warranty is only valid under normal installation, use and service conditions.
This warranty does not apply to any damage caused by normal wearing of the
product, incorrect installation or operation, alterations or modifications
performed by parties not authorized by Sheffield LABS, or the use of
replacement parts any brand other than Sheffield LABS. This warranty also
excludes damages caused by the use of abrasive cleaners, containing alcohol or
other organic solvents; whether the damage was caused by the consumer or third
parties. Sheffield LABS will not be responsible for workmanship
expenses, damages incurred during the installation, repair or replacement, or
for any direct, indirect, consequent damage or losses related to this product.
This warranty being Sheffield LABS sole responsibility, leaving no further
right or actions to the original buyer or third parties and liberating
Enchanté Lites New York and any other subsidiaries, affiliates, shareholders,
distributors, retailers, representatives, agents and employees of these or any
other responsibility for visible or hidden defects or damages of any kind.
The purchase, use and ownership of this product implies acceptance on behalf of the original buyer of the terms and conditions of this warranty
In order for the original buyer to make this warranty valid any claim must be accompanied by an original purchase ticket. To make this warranty valid write Sheffield LABS to the email below with subject: “Sheffield LABS Warranty”. Explain the kind of defect and include the purchase ticket (original), your full name and address, and phone number. Should the claim be compliant with warranty limitations, all necessary replacement parts will be mailed at no cost to the customer.
customersupportenchiites.com
1-800-936-3213
Monday to Friday from 9:00 am to 5:00 pm
CUSTOMER SUPPORT
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
Ifyou find thatyou have any trouble or missing or damaged parts
please contact us.
Ifyou need installation assistance, replacement parts or have questions
regarding our warranty, please contact our product
consultants at
customersupport@enchlites.com or call
toll free:
Monday to Friday from 9:00 a.m. to 5:00 p.m., EST. English and Spanish spoken.
International Regions: Please contact your local distributer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>