TREND BW6031 Convertible Light Instruction Manual
- June 3, 2024
- trend
Table of Contents
TREND BW6031 Convertible Light Instruction Manual
INSTALLATION INSTRUCTION
CAUTION
WARNING: Risk of Fire. Consult a qualified electrician to ensure correct
branch circuit conductor. Min 90ºC supplies conductors.
Turn off the main power at the circuit breaker before installing the fixture,
in order to prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National
Electrical Code (N.E.C.) standards. If you are unfamiliar with proper
electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no
parts are missing by referencing the illustrations on the installation
instructions.
Mounting/Hanging Parts
Convertible parts for Flush mount or wall lamp: 1/8″x 50mm nipple 1PC, Metal bushing 16mm 1PC, 8# x 1″box screws 2PCS, Fixture mounting screws with ball knobs 2PCS, P3 wire connectors 3PCS,
Tool for set screw 1PC
Convertible parts for Pendant: Canopy with Metal gripper 1PC, 7″ ground
wire 1PC, Round mounting strap with ground screw 1PC, Fixture mounting screws
with ball knobs 2PCS,
ASSEMBLY AND INSTALLATION
- OUTLET BOX
- WIRE CONNECTOR
- BLACK WIRE
- WHITE WIRE
- GROUND WIRE
- BOX SCREW
- MOUNTING SCREW
- HEX NUT
- MOUNTING BAR
- GROUND SCREW
- CANOPY
- BALL NUT
- BALL NUT
- SOCKET
- BULB
- ALUMINUM SHADE
FOR PENDENT
- Secure the mounting bar (9) with box screws (6) to the outlet box (1).
- Pull out the outlet wire and ground wire from the outlet box. Make wire connections with Wire Connector (2)
- Black wire from light to Black wire (3) from power source.
- White wire from light to White wire (4) from power source.
- Loop the ground wire (5) to mounting bar(9) with a ground screw(6).
- Attach the canopy (11) against the outlet box(1),secure with the ball nut(12) onto the mounting screw(7).
- Loosen the ball nut (13), insert the bulb (15) into socket(14). After that, put the bulb into the shade (16). Finally, screw up the ball nut.
DO NOT USE BARE HANDS TO TOUCH THE BULB.
INSTALLATION IS NOW COMPLETE
REMINDER
If you have not decided whether for pendent or flush mount or wall lamp, we suggest you to try for pendent first. In case that the wire is not long enough when you convert the item for pendent after cutting the wire for wall lamp or flush mount.
ASSEMBLY AND INSTALLATION
- OUTLET BOX
- WIRE CONNECTOR
- BLACK WIRE
- WHITE WIRE
- GROUND WIRE
- BOX SCREW
- MOUNTING SCREW
- HEX NUT
- MOUNTING BAR
- GROUND SCREW
- CANOPY
- BALL NUT
- BALL NUT
- SOCKET
- BULB
- ALUMINUM SHADE
FOR FLUSH MOUNT OR WALL LAMP
- Secure the mounting bar (9) with box screws(6) to the outlet box(1).
- Pull out the outlet wire and ground wire from the outlet box. Make wire connections with Wire Connector (2)
- Black wire from light to Black wire (3) from power source.
- White wire from light to White wire (4) from power source.
- Loop the ground wire (5) to mounting bar (9) with a ground screw (6).
- Attach the canopy (11) against the outlet box (1), secure with the ball nut (12) onto the mounting screw (7).
- Loosen the ball nut (13), insert the bulb (15) into socket (14). After that, put the bulb into the shade (16). Finally, screw up the ball nut.
DO NOT USE BARE HANDS TO TOUCH THE BULB.
INSTALLATION IS NOW COMPLETE
