TREND TP30065 Ingo 1 Light Pendant Instruction Manual
- June 3, 2024
- trend
Table of Contents
TREND TP30065 Ingo 1 Light Pendant
TP30065
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
WARNING : Risk of Fire. Consult a qualified electrician to ensure correct
branch circuit conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture,
in order to prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National
Electrical Code (N.E.C.) standards. If you are unfamiliar with proper
electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no
parts are missing by referencing the illustrations on the installation
instructions.
ASSEMBLY AND INSTALLATION
-
Secure the mounting bar(1) to the outlet box with box screws(3).
-
Pull out the outlet wire and ground wire from the outlet box. Make wire connections with
Wire Connector(4).
–Black wire from light to Black wire from power source.
–White wire from light to White wire from power source.
–Loop the ground wire to mounting bar(1) and secure with a ground screw. -
Attach the canopy(5) to the outlet box and secure with the ball nut(6) and mounting screw(2).
-
Put the shade (7) over the socket and secure it with the socket ring(8).
-
Insert the bulb (9, not included) into socket.
Do not exceed maximum suggested wattage – Max.60W
DO NOT USE BARE HANDS TO TOUCH THE BULB.
- MOUNTING BAR
- MOUNTING SCREW
- BOX SCREW
- WIRE CONNECTOR
- CANOPY
- BALL NUT
- LAMP SHADE
- SOCKET RING
- BULB
INSTALLATION IS NOW COMPLETE
Documents / Resources
|
TREND TP30065 Ingo 1 Light
Pendant
[pdf] Instruction Manual
TP30065 Ingo 1 Light Pendant, TP30065, Ingo 1 Light Pendant, 1 Light Pendant,
Pendant
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>