SONY HCD-DH3 Surround Sound Receivers Instruction Manual
- June 10, 2024
- Sony
Table of Contents
Ver. 1.3 2008.03
US Model
HCD-DH7BT
- HCD-DH3 is the amplifier, USB, disc player and tuner section in CMT-DH3.
- HCD-DH5BT is the amplifier, bluetooth, USB, disc player and tuner section in CMT-DH5BT.
- HCD-DH7BT is the amplifier, bluetooth, disc player and tuner section in CMT-DH7BT.
HCD-DH3 Surround Sound Receivers
-
This system incorporates Dolby Digital and the DTS Digital Surround System.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
·TS” is a registered trademark ofDTS, lnc. and DTS 2.0 + Digital Out” is a trademark of DTS, lnc. -
U.S. and foreign patents licensed from Dolby Laboratories.
-
DivX is a video file compression technology, developed by DivX, Inc.
DivX, DivX Certified, and associated logos are trademarks of DivX, Ine. and are used under license. -
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.
-
“WALKMAN” and “WALKMAN” logo are registered trademarks of Sony Corporation.
-
MI CROY AULT is a trademark of Sony Corporation.
-
A TRAC, ATRAC3, A TRAC3plus and their logos are trademarks of Sony Corporation.
-
MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.
-
The XM name and related logos are registered trademarks of XM Satellite Radio Inc.
-
(c) 2006 SIRIUS Satellite Radio Inc.
“SIRIUS” and the SIRIUS dog logo are registered trademarks of SIRIUS Satellite Radio Inc. -
rand ” marks are omitted in this manual.
Model Name Using Similar Mechanism | NEW |
---|---|
DVD Mechanism Type | CDM86-DVBU101 |
Optical Pick-up Block Name | KHM-313CAB |
SPECIFICATIONS
– HCD-DH7BT
AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOT AL HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from 120 – 10,000 Hz; rated 50 watts
per channel channel minimum RMS power, with no more than 10% total harmonic
distortion from 250 milliwatts to rated output.
Amplifier section
DIN power output (rated):
Except Chinese model: 40 W + 40 W (6 ohms at I kHz, DIN)
Chinese model: 35 W + 35 W (6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
Except Chinese model: 50 W + 50 W (6 ohms at I kHz, 10% THD)
Chinese model: 45 W + 45 W (6 ohms at 1 kHz, 10% THD)
Inputs:
AUDIO IN (stereo mini jack):
Voltage 620 mV, impedance 47 kilohms
MIC (mini jack) (HCD-DH3/DH5BT):
Sensitivity 0.8 mV impedance 10 kilohms
·- (USB) port (HCD-DH3/DH5BT):
Type A, maximum current 500 mA
Outputs:
DIGITAL OUT (square optical connector jack):
Wavelength 660 nm
VIDEO OUT (phono jack):
Max. output level 1 Vp-p, unbalanced, Sync.
negative load impedance 7 5 ohms
COMPONENT VIDEO OUT:
Y: 1 Vp-p, 75 ohms
PB/CB: 0.7 Vp-p, 75 ohms
PR/CR : 0.7 Vp-p, 75 ohms
S VIDEO OUT (4-pin/mini-DIN jack):
Y: 1 Vp-p, unbalanced, Sync. negative
C: 0.286 Vp-p, load impedance 75 ohms
PHONES (stereo mini jack): accepts headphones of 8 ohms or more
Bluetooth section (HCD-DH5BT/DH7BT)
Communication system:
Bluetooth Standard version 2.0
Output:
Bluetooth Standard Power Class 2
Maximum communication range:
Line of sight approx. 10 m!
Frequency band:
2.4 GHz band (2.4000 GHz – 2.4835
GHz)
Modulation method:
FHSS
Compatible Bluetooth profiles:
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote
Control Profile)
Supported codecs:
Receive: SBC (Sub Band Codee), MP3
Transmit: SBC (Sub Band Codec)
The actual range will vary depending on factors such as obstacles between
devices, magnetic fields around a microwave oven, static electricity,
reception sensitivity, antenna’s performance, operating system, software
application, etc.
Bluetooth standard profiles indicate the purpose of Bluetooth communication
between devices.
9-887-629-04
2008C05-1
© 2008.03
Sony Corporation
Audio Business Group
Published by SonyTechno Create Corporation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>