VIVALDI ROUND7F Frameless Speakers User Manual
- June 12, 2024
- VIVALDI
Table of Contents
ROUND7F Frameless Speakers
User Manual INSTALLATION INSTRUCTIONS
DIFFUSORI FRamELEss
FRAMELESS SPEAKERS
ROUND7F/TF,ROUND13F/TF ,GIADA13F/13TF ,GIADA16F/16TF ,GIADA20F/20TF
GIADA213F , ROUND16F/16TF, ROUND17TF . ROUND20F/TF
IN-WALL SPEAKER
Use enclosed template to mark out the cutout, then simply cut along the line.
This s the only cut you’ll need to make ! 
| MODEL | DIMENSIONS (LxHxP) | IN-WALL HOLE (LxH) |
|---|---|---|
| GIADA213F I | 386x 175×82 mm | 364×153 mm |
When laying loudspeaker cable from amplifier to installation point, be sure
that the cable ends about 30 cm (12*) beyond the wall cutout. 
Please
connect the speaker cable to the screw clamps. Ensure that the polarity is
correct. 
Tighten clamp screws until you can feel the frame, press firmly
against the ceiling. This indicates that the clamp is extended andis gripping
the ceiling. 
The grille cover of the InWall/InCeiling systems can simply
be coated with regular paint. If the grille cover of your system comes with an
additional coating this must be removed before painting.
Speaker Operation Manual
Equipment You Will Need
Besides template that is included, you must have a ladder and the equipment
shown below to make the installation go smoothly. 
Troubleshooting
| Problem | Possible cause | Solution |
|---|---|---|
| Bass too weak | Connection cable wrongly connected | Check connection cable and |
reconnect where necessary
Wiring Possibilities
IN-CEILING SPEAKER
Use enclosed template to mark out the. cutout, then simply cut along the line. This is the only cut you’ll need to make! 
| MODEL | DIMENSIONS (DxP) | IN-CEILING HOLE (D) |
|---|---|---|
| ROUNDTF | 1658 mm | 100 mm |
| ROUNDZTF | 116490 mm | 100 mm |
| ROUNDI3F/TE | 204×77 mm | |
| ROUNDIGF/TF | 227×87 mm | |
| ROUNDI7TF | 284155 mm | 262 mm |
| ROUND20F/TF | 277105 mm | 258 mm |
When laying loudspeaker cable from amplifier to installation point, be sure
that the cable ends about 30 cm (12″) beyond the wall cutout.
Please connect the speaker cable
to the screw clamps. Ensure that the polarity is correct.
Tighten
clamp screws until you can feel the frame, press firmly against the ceiling.
This indicates that the clamp is extended andis gripping the ceiing.
The
grille cover of the InWall/InCeiling systems can simply be coated with regular
paint. If the grille cover of your system comes with an additional coating
this must be removed before painting. 
IN-WALL SPEAKER
Use enclosed template to mark out the cutout, then simply cut along the line. Thisis the only cut you’ll need to make! 
| MODEL | DIMENSIONS (LxHxP) | IN-WALL HOLE (LxH) |
|---|---|---|
| GIADA13F | 175×26775 mm | 153×245 mm |
| GIADA13TF | 175267580 rom | 153,245 mm |
| GIADAT6F | 205¢300×86 mm | 186×280 mm |
| GIADAT6TF | 205:300×90 mm | 186×280 mm |
| GIADA20F | 242x362005mm | 220340 mm |
| GIADAZ0TF | 2023862110 mm | 220×340 mm |
When laying loudspeaker cable from amplifier to installation point, be sure
that the cable ends about 30 cm (12″) beyond the wall cutout. 
Please
connect the speaker cable to the screw clamps. Ensure that the polarity is
correct.
Tighten clamp screws until you can feel the frame, press firmly
against the ceiling This indicates that the clamp is extended andis gripping
the ceiing. 
The grille cover of the InWall/InCeiling systems can
simply be coated with regular paint. If the grille cover of your system comes
with an additional coating this must be removed before painting.
FOREIGN WARRANTY
Country terms. The term and warranty may vary by country and may not be the
same for all products. Warranty terms and conditions for a specific product
can be determined first by locating the appropriate country where the product
was purchased, then
identifying the type of product.
VIVALDI UNITED GROUP divisione VIVALDI SrI
Via Enrico Fermi, 8- 30020 Noventa di Piave (VE) – ITALIA
Tel. +39 0421.307825
Fax. +39 0421.307845
info@vivaldigroup.it
www.vivaldigroup.it
(c)2022Vivaldi Srl
Vivaldi srl ongoing effort to improve its products reserves the right to make
technical and aesthetic changes effectively without obligation to notice.