GYMAX SP38104US Walking Machine Instruction Manual

GYMAX SP38104US Walking Machine

Product Information

Specifications

• Model: SP38104US, SP38104CA
• Motor upper cover
• Acrylic plate
• Silicone oil filling port
• Edging
• Tail cap
• Motor lower cover
• Hand frame
• Rubber anti-vibration mounting
• Running belt
• Rear roller

Product Usage Instructions

Before You Start

Prior to using the treadmill, please keep the following in mind:

• The treadmill should be placed indoors to avoid moisture. Do not splash water on the treadmill or place any foreign objects on it.
• Before exercising, wear suitable sports clothes and sneakers. It is strictly forbidden to exercise barefoot on the treadmill. Stretch your whole body before starting the exercise.
• The power plug must be properly grounded, and the socket should have a dedicated circuit to avoid sharing with other electrical equipment.

Safety Precautions & Warning Instructions

Please read the following safety precautions carefully before use:

• Check that your clothing is buttoned or zipped before using the treadmill. Avoid wearing clothes that can get caught on the treadmill.
• Keep the power cord away from hot objects.
• Keep children away from the treadmill.
• Use the treadmill only indoors. Do not use it outdoors.
• Always cut off the power before moving the treadmill.
• Non-professional personnel should not disassemble the machine without permission.
• During exercise, only one person should be on the treadmill. If you experience dizziness, chest pain, nausea, or shortness of breath, stop exercising immediately and consult a fitness instructor or doctor.

Prohibitions

The following actions are strictly prohibited:

• Do not use the treadmill if the shell is cracked, damaged, or falling off, as it may lead to accidents or injuries.
• Avoid jumping up and down during exercise to prevent injuries from falls.
• Avoid using or storing the treadmill in wet places or areas with water drops, near the bathroom, or other wet locations.
• Avoid using or storing the treadmill in places with direct sunlight or high temperatures (eg, around the stove or heating appliances) to prevent leakage and fire.
• Do not use the treadmill if the power cord or power plug is damaged or the socket is loose, as it may result in electric shock, short circuit, or fire.
• Avoid damaging, forcibly bending, twisting the power cord, or placing heavy objects on it. Do not let the line get caught to prevent fire or electric shock.
• Do not use the treadmill with multiple people at the same time. Be cautious not to allow people around you to get close during use to prevent accidents or injuries from falling.
• Do not use the treadmill if you are unable to express your own consciousness or operate it, as it may lead to accidents or injuries.
• Avoid contact between the main body or operating part of the treadmill and water or liquids to prevent electric shock and fire.

FAQs

Q: Can I use the treadmill outdoors?
A: No, the treadmill should only be used indoors.

Q: What should I do if I experience discomfort during exercise?
A: If you feel dizzy, chest pain, nausea, or shortness of breath during exercise, stop exercising immediately and consult a fitness instructor or doctor.

Q: Can multiple people use the treadmill at the same time?
A: No, the treadmill is designed for single-person use. Using it with multiple people simultaneously may result in accidents or injuries.

Before You Start

• Please read all instructions carefully.
• Retain instructions for future reference.
• Separate and count all parts and hardware.
• Read through each step carefully and follow the proper order.
• We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
• Always place the product on a flat, steady and stable surface.
• Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

Product Introduction

Safety Precautions & Warning Instructions

Attention! Please read the instructions carefully before use and pay attention to the following safety precautions:

• The treadmill should be placed indoors to avoid moisture, do no t splash water on the treadmill, and do not place any foreign bodies.
• Before exercising, please wear suitable sports clothes and sneakers. It is strictly forbidden to exercise barefoot on the treadmill, and the whole body should be stretched before exercise.
• The power plug must be reliably grounded, and the socket must have a dedicated circuit to avoid sharing with other electrical equipment.
• Children should stay away from the machine to avoid accidents.
• Overload operation should be avoided for a long time, otherwise it will cause damage to the motor and controller, accelerate the aging of bearings, running belts and running plates, and maintain them regularly.
•  Reduce indoor dust, maintain a certain humidity in the room, and avoid strong static electricity, otherwise it may interfere with the normal work of the electronic meter and controller.
• Turn off the power supply of the running machine after use.
• Keep the room ventilated when using the treadmill.
• If you feel unwell or have an abnormal condition during use, stop exercising immediately and consult your doctor.
• After the use of silicone oil, it must be stored in a place where children cannot reach, to avoid serious consequences caused by accidental ingestion.

Warning: In order to reduce the occurrence of accidents or injury to others, please follow the following rules:

• Before using the treadmill, check that your clothing is buttoned or zipped.
• Don’t wear clothes that can get caught on the treadmill
• Do not place the power cord near hot objects.
•  Do not let children near the treadmill.
• Do not use the treadmill outdoors.
• Power must be cut off before moving the treadmill.
• Non-professional personnel shall not disassemble the machine without permission, otherwise it may have serious consequences.
• Machine start only one person on the treadmill exercise.
• If you feel dizzy, chest pain, nausea, or shortness of breath during exercise, stop exercising immediately and consult a fitness instructor or doctor.

Prohibition!

• Do not use the shell in a cracked, damaged and falling off state (internal structure exposed) or in a state where the welding part is falling off. To avoid accidents or injuries.
• Do not jump up and down during exercise. Otherwise, injuries may result from a fall.
• Do not use and store outside, near the bathroom and other we places and places where water drops.
• Do not use or store in places with direct sunlight, high temperature places such as around the stove, and on heating appliances such as electric carpets. Otherwise, it may lead to leakage and fire.
• Do not use when the power cord or power plug is damaged or the socket is loose. Otherwise, electric shock, short circuit and fire may occur.
• Do not damage or forcibly bend or twist the power cord. At the same time, do not place heavy objects on it, do not make the line caught. To avoid fire or electric shock.
• Do not use 2 or more people at the same time, and be careful not to let people around you get close during use. Otherwise, accidents or injuries may occur as a result of falling.
• Do not use if you are unable to express your own consciousness or if you are unable to operate. To avoid accidents or injuries.
• Avoid contact with water and liquids! Do not let the main body or operating part contact with water or liquid. Otherwise, electric shock and fire may occur.
• People who do not normally exercise should not suddenly do intense exercise.
• Do not use after eating or drinking, when you are tired, just after exercise, or when your physical state is not normal. Otherwise, it may damage your health.
• This product is suitable for family use, not suitable for schools, gymnasiums and other large number of non-specific places. Otherwise there is a risk of injury.
• Do not use with food or other activities.
• Do not use if you feel your behavior has become dull after drinking. To avoid accidents or injuries.
• Do not carry hard objects in the pockets of clothing. Please remove valuables such as watches, bracelets, mobile phones and sharp objects such as keys and knives before use to avoid damage or physical injury.
• Before use, check whether there is any foreign matter such as needle, garbage or water attached to the power plug. To avoid electric shock or short circuit, fire.
• Never use with wet hands! Do not pull out or insert the power plug with wet hands. To avoid electric shock or injury.

Unplug the power! Remove the power plug from the socket when not in use. Try to avoid insulation deterioration caused by dust and moisture, as this may result in leakage fire etc.

Packing List

Accessory List

Assembly Instruction

1.  Take the product out of the packing box, remove the outer PE bag, and put it on the flat ground.
2. Take out the power cord from the ziplock bag, insert the plug end into the socket in front of the machine head.
   Insert the other end into the 110V socket and turn the power switch next to it to the “I” position to start using the product.

Remote Control Key Function

• Power Off: Press the key, the speed will slow down and stop, and all data return to zero
• Speed/Time +: Press the key to increase time and speed
• Program: Press the key, the P1-P12 automatic mode can be used in the standby state
• Speed/Time -: Press the key to decrease time and speed
• Mode: Press the key, H-1 Time countdown, H-2 Distance countdown, H-3 Calorie countdown can be used in standby state
• Start/Pause: Press the key to start the machine, and press it again to stop

Remote Control Instruction

1. For the first time use, please pull out the insulation film on the left side of the remote control from the gap in the figure, and the remote control can be powered on (Effective control distance is 6.6-16.4ft).
2. If the remote control needs to replace the battery, press the lock button as shown in Figure 1, and then open the battery slot as shown in Figure 2 to replace the battery. It is recommended to use CR2025 batteries.

Product Instruction for Use

Brief Introduction
This electronic meter is easy to use and has few adjustment parameters
Treadmill parameters: Speed values.
Exercise parameters: Distance value, calorie value, time value. Exercise mode: Manual mode and program mode.
Manual mode: Exercise mode that doesn’t set the amount of exercise.
Program mode: Exercise mode that sets the amount of exercise.

LED Digital Tube Display

1. Speed display
2. Time display
3. Distance/Calorie Display

Display Window

Specifications

1. Power supply voltage: 110V/60Hz;
2. Minimum speed: 0.5 MPH;
3. Maximum speed: 4 MPH;
4. The shortest time in automatic mode is 5 minutes, and the longest exercise time is 99 minutes;
5. The minimum distance in manual mode is 1 mile, the longest distance is 99 miles;
6. The minimum calorie in manual mode is 20 kcal and the maximum is 990 kcal.

Exercise Mode Instruction

Automatic Mode
Before exercise, check whether the power is plugged in and the power switch is turned on. In the standby state, the panel displays 0000, the Before exercise, check whether the power is plugged in and the power
switch is turned on. In the standby state, the panel displays 0000, the countdown starts after pressing the key for 3 seconds, and the speed displays 0.5 mph. The distance and time on the window are shown clockwise. Press the key on the remote control to adjust the speed, the minimum speed is 0.5 mph, the maximum speed is 4 mph. Press the key again, the machine slowly pauses, the speed returns to zero, other data is kept in the current state, the screen is steady on and does not go out. Press the key again, and the machine will start at 0.5 mph. Press the F30 minutes and flashes. Presskey and the machine will stop slowly, and all the data will return to zero.

Manual Mode

1. In standby state, the window displays 0:00, press the P key on the remote control, the window displays P01……P12, and the time is displayed for 30 minutes and flashes. Press key to adjust the time, the minimum is 5 minutes, the maximum is 99 minutes.
   After completing the setting, press the key on the remote control, and enter the program mode after 3-second countdown.

2. In standby state, the window displays 0:00, press the key on the remote control, the window displays H-1, and the time is displayed for 30 minutes and flashes. Press the key on the remote control to adjust the time, the minimum is 5 minutes, the maximum is 99 minutes. After completing the setting, press the key on the remote control, and enter the mode function after 3-second countdown.

3. In standby state, the window displays 0:00, press the key on the remote control, the window displays H-2, and the distance is displayed for 1 mile and flashes. Press the key on the remote control to adjust the distance, the minimum is 1 mile, the maximum is 99 miles. After completing the setting, press the key on the remote control, and enter the mode function after 3-second countdown.

4. In standby state, the window displays 0:00, press the key on the remote control, the window displays H-3, and the calorie is displayed for 50 kcal and flashes. Press the key on the remote control to adjust the calorie, the minimum is 20 kcal, the maximum is 990 kcal. After completing the setting, press the key on the remote control, and enter the mode function after 3-second countdown.

5. Remote control shortcut key function: regardless of any speed, press the shortcut key on the remote control (if there is), you can adjust the speed to the required speed range.

Product Maintenance

Running Belt lubrication
After using the running belt for a period of time, it is necessary to check the lubrication regularly. The way to determine whether lubrication is needed is to touch the central part of the back of the running belt. “Wet” means it doesn’t need lubrication, “dry” means it needs lubrication.

The lubrication steps are as follows:

1. Stop running the belt.
2. Open the lid of the filling port.
3. Squeeze the silicone oil bottle and add 15-30 ml of silicone oil to the filling port, then close the lid.
   This will ensure the normal operation of the running belt.

Tightness Adjustment of the Running Belt
All walking machines need to be adjusted before leaving the factory and after installation, but there may be slack after a period of use.
Such as: the user pauses and slips when running. When this phenomenon occurs, adjust the running belt adjustment bolts in a clockwise direction with a half circle as the unit, left and right synchronously. If the running belt is too loose, the running belt and the roller will make your feet slip, but too tight is not good, and it is easy to increase the load of the motor and damage the motor, running belt and roller.
Running belt deviation adjustment

All walking machines must be adjusted before leaving the factory and after installation. However, after a period of use, it may still run deviation. The reasons for the phenomenon are as follows:

1. The machine is not stable;
2. The user’s feet are not in the center of the running belt when exercising;
3. Uneven force of the user’s feet.

The deviation caused by man can be restored to normal after a few minutes of no-load rotation. For deviations that cannot be automatically restored, the provided 6mm wrench should be used to gradually adjust the deviation in half- turn units.

1. Running belt slip: When running, there is an empty slip or a momentary pause;
2. Running belt adjustment: Tighten the bolts on the left and right sides of the belt 3 turns clockwise, and then adjust according to the direction of the running belt. If the running belt deviates to the right, adjust the right side bolt, and then slowly correct the running belt in turn until the running belt is centered.

Troubleshooting Guide

the communication cable

2.  Replace the electronic meter and repair it

 |  | 2. The electronic meter has no signal output

3.  No signal is output from the lower controller

| 3. Replace the lower controller and repair it
E02| The voltage between the lower controller and the motor is abnormal| 1. The motor cable is not connected properly

2. The lower controller has no voltage output to the motor or the voltage output is abnormal

3.  Bad motor

| 1.  Check whether the motor cable is correctly connected

2.  Replace the lower controller and repair it

3.  Replace the motor

---|---|---|---
E03| lower controller detects speed anomalies| The PWM driver circuit of the lower controller is faulty| Replace the lower controller board
E04| Motor overvoltage protection| 1. The treadmill load greatly exceeds the rated working voltage of the motor

2. The treadmill motor is abnormal

3.  lower controller board motor overvoltage, test circuit failure

| 1.  It is recommended to use within the rated operating voltage range of the motor.

2.  Change the motor

3.  Replace the lower controller and repair it

E05| Motor overcurrent protection| 1. The treadmill load exceeds the rated working current of the motor| 1. It is recommended to use within the rated working current range of the motor
 |  | 2. There is a problem with the assembly structure of the treadmill and the motor, resulting in motor resistance or blockage

3. The lower controller current limiting system is faulty

| 2.  Check whether the treadmill structure is normal

3.  Replace the lower controller and repair it

E06| The voltage is too low| 1. The power supply voltage is too low

2. The stain detection circuit of the lower controller board is faulty

| 1.  Check whether the power supply cable is normal

2.  Replace the lower controller and repair it

---|---|---|---

Other problems and troubleshooting methods:

1. The screen is not displayed
   • Check whether the power cord is plugged in, whether the power switch is turned on, and whether the fuse on the controller is blown;
   • Whether the 4-core wires of the electronic meter and the controller are connected properly;
   • Whether the controller and transformer are properly connected.
2. The motor does not start
   • Please check that all cables are properly connected;
   • Please observe the error signal on the electronic meter.
3. Touch screen is not sensitive
   • Please check whether the touch screen is wet;
   • Please check your hands for sweat.

Return / Damage Claim Instructions

• DO NOT discard the box / original packaging.
  In case a return is required, the item must be returned in original box. Without this your return will not be accepted.

• Take a photo of the box markings.
  A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.

• Take a photo of the damaged part (if applicable).
  A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.

• Send us an email with the images requested.
  Email us directly from marketplace where your item was purchased with the attached images and a description of your claim.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>