Kruger Matz KM0258UHD-S5 58-Inch Telewizor Smart TV Owner’s Manual
- June 4, 2024
- Kruger Matz
Table of Contents
KM0258UHD-S5 58-Inch Telewizor Smart TV
Owner’s Manual
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The symbol indicates that dangerous voltages constituting a risk of electric
shock are present within this unit.
****The symbol indicates that there are important operating and maintenance
instructions in the Iiteraturaccompanying this unit.
IMPORTANT SAFETY INSTRUCTION
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with a dry cloth.
-
Do not block any ventilation openings, install in accordance with the instructions.
-
Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet. -
Protected the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments/accessories specified by the manufacturer.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
-
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
-
No naked flame sources, such as lighted candles, should be placed on the apparatus.
-
Attention should be drawn to the environmental aspects of battery disposal.
-
The use of apparatus in a moderate climate.
-
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
Warning
High voltages are used in the operation of this television receiver. Do not
remove the cabinet back from your set. Refer servicing to qualified service
personnel.
Warning
To prevent fire or electrical shock hazards, do not expose the television
receiver to rain or moisture.
Warning
Do not drop or push objects into the television cabinet slots or openings.
Never spill any kind of liquid on the television receiver.
Caution
Do not block the ventilation holes in the back cover. Adequate ventilation is
essential to prevent the failure of electrical components.
Caution
Do not trap the power supply cord under the television receiver.
Caution
Never stand on, lean on, or suddenly push the television or its stand. You
should pay special attention to children. Serious injury may result if it
should fall.
Caution
Do not place your television on an unstable cart, stand, shelf or table.
Serious injury to an individual, and damage to the television, may result if
it should fall.
Caution
When the television receiver is not used for an extended period of time, it is
advisable to disconnect the AC power cord from the AC outlet.
INSTALLATION
- Locate the TV in the room where light does not strike the screen directly.
- total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
- AIIow enough space between the TV and the wall to permit ventilation.
- Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure.
- Do not cover the ventilation openings when using the TV.
Minimum distances
The base stand assembly instruction
When you install the base, the need to face down flat on the TV platform. Before installing (or removing) the stand, unplug the AC power cord from the AC outlet before performing the operation, laying a cushion in place of the TV will be placed to prevent damage to the TV.
Step 1
Locate the 2 of the bottom bracket into the gap in the bottom of the TV, and
check that it is securely held in place as in illustration A) below.
Step 2
Lock the 2 screws in the designated location as in illustration B) below.
Check each screw is firmly tightened.
Warning:
Be sure to follow the instructions for installation, if the base is not
installed correctly, it may result in the TV falling over. To remove the
stand, perform the steps in reverse order, the base can not adjust the angle.
During the installation process, be careful to avoid damage to the TV and your
hand caught and ground to the bottom of the TV.
Mounting on a wall
IMPORTANT This operation requires two people!
To ensure a safe installation, comply with the following safety instructions:
- Disconnect from the power supply before mounting.
- Check that the wall can support the weight of the TV set and wall mount assembly.
- Follow the mounting instructions provided with the wall mount.
- The TV set must be installed on a vertical wall.
- Make sure to use only screws suitable for the material of the wall.
- Make sure that the TV set cables are placed in such a way that there is no danger of tripping over them.
- Mounting the TV set on the wall should be performed only by professionals.
BUTTON ON THE TV SET
Note: The location, names and availability of the buttons may vary according to the TV model. Please refer to the actual product.
- Press the button to turn on the TV.
- When the TV is on, press it to bring up the Menu.
- While in the Menu, press the button to select the option. Press and hold the button to confirm the option.
SOCKETS
Note: The location, names, and availability of the sockets may vary according to the TV model.
| Socket | Function |
|---|
RF input:
lx analogue DVB-T/T2/C lx DVB-S/S2| Connect with ground-based or satellite
television with an antenna cable. Connect the plug of an antenna cable to the
ANTENNA INPUT. Connect the plug of a satellite antenna cable to the SATELLITE
input.
LINE OUT output| Connect a compatible audio receiver to the TV set.
Cl+ slot| Technology that allows you to insert a CI module that allows your TV
set to receive scrambled TV channels.
HDMI input| Transmits video and audio data from external devices such as DVD
or Blu-Ray player, video game console, or PC (with a compatible video card) to
your TV set with an HDMI cable.
USB input| Connect USB storage device.
AV composite input| Designed to transmit video and audio data from external
devices such as PVR, camera, DVD player, and video game console to the TV set
with RCA cable.
SPDIF (Optical) output| Transmits audio data from the TV set to external
devices such as an amplifier or speaker set with an optical cable.
RJ-45| Connect the TV set to the Internet with a LAN cable.
CONNECTING TO THE INTERNET
The TV set can be connected to the network in two ways:
- Wired, using the RJ-45 port.
- Wireless, using a Wi-Fi network.
Connecting to a wired network
-
Ensure you have:
• LAN cable long enough to reach your TV set.
• Router or modem with available RJ-45 port;
• High-speed internet connection. -
Connect the LAN cable to the router and to the RJ-45 port.
-
Enter Network Settings to configure the Internet connection.
-
The TV set should have connected to the selected wired network.
Connecting to a wireless network
-
Ensure you have:
• High-speed internet connection. -
Enter Network settings to configure the Internet connection.
-
The TV set should have connected to the selected wireless network.
REMOTE CONTROL
Most of your television’s functions are available via the menus that appear on
the screen. The remote control supplied with your set can be used to navigate
through the menus and configure all the general settings.
Note! The location, names, and availability of the buttons on the
remote control may vary according to the TV model. Some buttons may not be
available on your remote control.
| Switch the TV between on and standby mode
---|---
| Switch the sound off/on
0-9| Number key
FAV| Display favorite channel list
LIST| Display channel list
| Increase/decrease volume
TV| Enter TV mode
| SMART functions
P +/-| Next/previous channel
| Open the homepage of the Smart TV portal
| Display Option menu
| Use to navigate the menu and adjust options
OK| Confirm an entry or selection
| Return to the previous menu
| Display and select input source
EXIT| Exit the menu
ZOOM| Select screen mode
| Enter the main menu
INFO| Display program information (if available)
EPG| Enter Electronic Program Guide in TV mode
Lang/AD| Select audio language
USB| Enter Multimedia menu
SUBT.| Display subtitle menu
TEXT| Display Teletext
COLOR
BUTTONS| Additional function
| Search backward
| Play
| Pause
| Search forward
| Previous
| Stop
| Next
| PVR function
| Enter Netflix main page
| Enter YouTube main page
BASIC OPERATION
- Connect the device to the power supply socket.
- Connect the antenna cable to the appropriate RF input.
Switch the TV on and off
- When the TV is connected to the power supply, it will be turned on directly or be in standby mode (red LED is on). If the TV is in standby mode, press the Power button to turn it on.
- To put the TV set into standby mode, press the Power button on the TV set or remote control. The TV set remains on, but with low energy consumption. To switch off the TV set, unplug it from the power supply.
Note: For some models, press the Power button to switch off the TV set.
INITIAL SETUP
The first time you switch the TV set on, the Welcome screen appears, which guides you through the initial setup process. Follow the on-screen instructions to finish the initial setup process such as selecting the language, connecting to the network, scanning channels, and more. During each step, either make a choice or skip the step. If you skip a step, you can perform the setup later from the settings menu.
LOCK CODE
To enable the lock function, input default code 1234. The default code should be changed in the lock menu. If you forget existing code, input code 0423 to access the lock menu.
LEARN MORE
For more information on this device visit:
www.krugermatz.com.
Visit www.krugermatz.com website for more products and accessories.
In case of any doubts or questions reach out to our Frequently Asked Questions
section.
Lechpol Electronics Sp. z o.o. Sp.k. hereby declares that LED TV KM0258UHD-S5 is consistent with directive 2014/53/UE. Full text of the EU Declaration of Conformity is available at the following Internet address: www.lechpol.pl
Radio Information
- 2.4G Wi-Fi transmitter frequency range: 2412 – 2472MHz
- 2.4G Wi-Fi transmitter power: 16dBm (+/- 4dB)
- DVB-T/T2/C tuner frequency range: 45 – 858MHz
- DVB-S/S2 tuner frequency range: 950 – 2150MHz
Do not touch or be close to the ANT IN, SATELLITE IN, LAN port, AV IN, AV OUT, HDMI input, or USB 2.0 port and prevent electrostatic discharge to disturb these terminals when in USB and LAN mode; otherwise it will cause the TV to stop working or abnormal status.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
It is forbidden to place equipment waste marked with the symbol of a crossed- out trash bin together with other waste. This equipment is subject to collection and recycling. The harmful substances it contains can cause environmental pollution and pose a threat to human health.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.
www.krugermatz.com
is a registered trademark
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>