logitech G PRO X Wireless Lightspeed Gaming Headset User Guide
- June 3, 2024
- Logitech
Table of Contents
logitech G PRO X Wireless Lightspeed Gaming Headset
WHAT’S INCLUDE
FEATURES
- Microphone mute toggle
- Volume wheel
- Power switch
- USB C charging port
- Microphone
HEADSET SETUP
- Connect microphone to headset
- Plug receiver into USB port
- Turn on power switch
- Download and install optional software
logitechG.com/ghub
logitechG.com/support
HEADSET OPERATION
- Microphone mute toggle
- Microphone is active when red is not visible. Microphone is muted when red is visible.
- Volume wheel
- Rotate up to increase OS volume.
- Rotate down to decrease OS volume.
- Power switch
- Power is on when cyan is visible. Power is off when red is visible. Headset will power down automatically after 30 minutes of no audio to save battery life. To resume use, turn the power off, then back on again. Timeout value can be adjusted in G HUB.
- USB C charging port
- Use provided USB A to USB C charging cable to charge headset by plugging into USB port on PC.
- Cable is for charging and firmware update only – audio will not play over wired connection.
- Microphone
- For optimal voice pickup, place foam ball approximately two fingers’ width from the corner of your mouth. Blue VO!CE functionality can be enabled using G HUB software.
©2020 Logitech. Logitech, Logitech G, Logi and their respective logos are trademarks or registered trademarks of Logitech Europe S.A. and/or its affiliates in the U.S. and other countries. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice
References
Read User Manual Online (PDF format)
Loading......