NETGEAR AV AES67 Audio Over IP Requiring PTP Transparent Clock User Guide

NETGEAR AV AES67 Audio Over IP Requiring PTP Transparent Clock

Product Information

This guide provides instructions on how to configure a network with AES67 Audio over IP requiring PTP Transparent Clock. It involves configuring the network for AES67 Audio over IP and enabling PTPv2 on each switch.

Usage Instructions

1. Open the Engage controller and navigate to Site Settings.
2. Click on the menu icon for the default VLAN and select Edit.
3. From the Profile Template drop-down, choose Audio AES67.
4. Click on Next.
5. Click on Next.
6. Click on Apply.
7. Click on Confirm.
8. Click on Devices.
9. Select Configure for the first switch.
10. Click on Network Profiles.
11. Enable the toggle for PTP residency time stamping.
12. Click on Save.
13. Click on Devices.
14. Select Configure for the next switch.
15. Click on Network Profiles.
16. Enable the toggle for PTP residency time stamping.
17. Click on Save.
18. If you have more switches on your network, repeat the above steps to enable PTP residency time stamping for each switch.
19. Once completed, your network will be configured with AES67 Audio over IP requiring PTP transparent clock.

Note : Please refer to the user manual for additional information and troubleshooting steps if needed.

Configuring

Configuring AES67 Audio over IP requiring PTP Transparent Clock

• In this guide, we will be going over how to configure a network with AES67 Audio over IP requiring PTP Transparent Clock.
• We will be configuring the network for AES67 Audio over IP and then enabling PTPv2 on each switch.

INSTALLATION INSTRUCTION

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>