ETHAN ALLEN 096099 GLD Piper Table Lamp Instruction Manual

ETHAN ALLEN 096099 GLD Piper Table Lamp

Piper Table Lamp

Product Information:

• Model Number: 096099 GLD
• No tools required for assembly
• Light bulb is not included
• Parts Included:
  1. Finial
  2. Shade
  3. Harp
  4. Socket and Saddle
  5. Plug Cap

Product Usage Instructions:

1. Use care when unpacking. Locate ALL THE PARTS INCLUDED before disposing of packaging materials. Remove the silica gel packet from the socket before plugging the lamp into an outlet.
2. Assembly Procedure:
3. Install the Harp onto the Saddle.
4. Install the Shade into the Harp.
5. Install the Finial onto the Harp.
6. Install the bulb onto Socket.
7. Remove the Plug Cap.
8. Caring for and cleaning your lamp:
9. Wipe with a soft, dry cloth.
10. Avoid cleaners, scouring pads, etc., as these may cause damage to the lamp finish.
11. Before changing bulb, unplug the lamp and allow the bulb to cool first.
12. Troubleshooting:
    • Problem: Bulb does not light
    • Possible cause: Bulb is burnt or damaged
    • Power to lamp is off
    • Lamp is not plugged in
    • Correction: Replace bulb
    • Confirm power is on
    • Confirm lamp is plugged in

If the fixture still does not work after troubleshooting, please contact your local Ethan Allen Design Center.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY:
This lighting fixture is for indoor use only. This lamp is equipped with a polarized plug. One plug blade is wider than the other. DO NOT MODIFY the plug or power cord in any way. DO NOT EXCEED the recommended bulb wattage. Use only the type of bulb specified. Keep flammable materials away from the bulb. DO NOT OPEN the product or alter the wiring in any manner. If using an extension cord, follow precautions provided with the power cord.
Use care when unpacking. Locate ALL THE PARTS INCLUDED before disposing of packaging materials. Remove the silica gel packet from the socket before plugging the lamp into an outlet.

ASSEMBLY, CARE, AND TROUBLESHOOTING

• No tools required for assembly
• Light bulb is not included

Parts Included

(Refer to the Figure)

• A. Finial
• B. Shade
• C. Harp
• D. Socket and Saddle
• E. Plug Cap

Assembly Procedure

(Refer to the Figure)

1. Install the Harp (C) onto the Saddle (D)
2. Install the Shade (B) into the Harp (C)
3. Install the Finial (A) onto the Harp (C)
4. Install the bulb onto Socket (D)
5. Remove the Plug Cap (E)

Caring for and cleaning your lamp

1. Wipe with a soft, dry cloth.
2. Avoid cleaners, scouring pads, etc., as these may cause damage to the lamp finish.
3. Before changing bulb, unplug the lamp and allow the bulb to cool first.

Troubleshooting

If the fixture still does not work after troubleshooting, please contact your local Ethan Allen Design Center.

SAVE THESE INSTRUCTIONS

Documents / Resources

| ETHAN ALLEN 096099 GLD Piper Table Lamp [pdf] Instruction Manual
096099 GLD Piper Table Lamp, 096099 GLD, Piper Table Lamp, Table Lamp, Lamp
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>