SANREMO Treviso LX Espresso Coffee Machine Instruction Manual
- June 16, 2024
- SANREMO
Table of Contents
SANREMO Treviso LX Espresso Coffee Machine
Product Information
Model: Treviso, Treviso LX, Treviso LX 1500W
Instruction Booklet: Libro De Instrucciones
Website: https://manual-hub.com/
Technical Specifications
- Width: mm
- Depth: mm
- Height: mm
- Boiler Capacity (mod. Treviso LX 1500W): liters
- Water Tank Capacity (version with vibration pump): liters
- Power Supply Voltage: V
- Resistance Power Consumption (mod. Treviso LX 1500W): kW
- Vibration Pump Power Consumption: kW
- Rotary Pump Power Consumption: kW
- Solenoid Valve Power Consumption: kW
- Automatic Level Regulator Power Consumption: kW
- Boiler Operating Pressure: MPa
- Safety Valve Calibration Pressure: MPa
- Water Network Pressure (Max) (Treviso LX – Treviso LX 1500W): MPa
Product Usage Instructions
Installation
Before installing the machine, make sure that the voltage and power of the
network are suitable according to the technical specifications table. Then,
remove the machine from the packaging and place it stably and securely in the
designated location, ensuring that there is enough space for its use.
Electrical Connection
Before connecting the power cable to the line, verify that
- The machine is properly grounded.
- The voltage corresponds to the network voltage.
- The power cable is intact and undamaged.
Hydraulic Connection
- The machines should only be supplied with cold water.
- In the Treviso version (Vibration Pump), remove the tank, rinse it, fill it, place it back in its position by reintroducing the tubes, and close the cap.
- In the Treviso LX and Treviso LX 1500W versions, connect the flexible tube to the water network.
Usage
Preliminary Check
Before using the machine, make sure that
- The power plug is inserted.
- In the Treviso LX and Treviso LX 1500W versions, the water inlet hose is correctly connected to the water network, there are no leaks, and the water is turned on.
Hot Water Dispensing
For hot water dispensing, make sure that the boiler pressure gauge
indicates a pressure within the recommended range. Be cautious to avoid burns.
Frequently Asked Questions (FAQ)
-
Can the machine be connected to a hot water supply?
No, the machine should only be supplied with cold water. -
What is the maximum operating pressure of the boiler?
The maximum operating pressure of the boiler is (1.8 Bar) MPa. -
Is the machine suitable for commercial use?
Yes, the machine is suitable for both commercial and domestic use.
This instruction booklet contains all the necessary information and advice for
best possible use and storage of your coffee maker.
This booklet refers to the following model:
mod. TREVISO TREVISO LX TREVISO LX 1500W
Semi-automatic with continual dispensing managed by a level controller through
a microswitch located on the dispensing group head lever. Available in the
versionsversions 11 ggrouproup wwithith vibration pump and 1 group with rotary
pump. Available in the TREVISOTREVISO 1 filter head version with vibration
pump, the TREVISOTREVISO LXLX 1 filter head version with rotary pump and the
TREVISOTREVISO LX 1500W 1 filter head version with rotary pump, 1.8 filter
boiler and 1500W heating element.
TECHNICAL DETAILS
WIDTH
mm| 322
---|---
DEPTH
mm| 460
HEIGHT
mm| 451
BOILER CAPACITY mod. TREVISO – TREVISO LX
litres| 1,052
BOILER CAPACITY mod. TREVISO LX 1500W
litres| 1,8
TANK CAPACITY
litres| 3,4
TANK CAPACITY (Version with vibration pump)
litri| 3.4
VOLTAGE
V| 120/230
HEATING ELEMENT INPUT mod. TREVISO – TREVISO LX
kW| 1,3
HEATING ELEMENT INPUT mod. TREVISO LX 1500W
kW| 1,5
ELECTRIC VIBRATION PUMP INPUT
kW| 0,041/120V| –| 0,048/230V
ROTARY ELECTRIC PUMP INPUT
kW| 0.12
SOLENOID VALVE INPUT
kW| 0,01
AUTOM. LEVEL CONTROLLER INPUT
kW| 0,01
BOILER WORKING PRESSURE
(1,1-1,3 Bar) MPa| 0,11| –| 0,13
SAFETY VALVE CALIBRATION PRESSURE (1.8 Bar)
MPa| 0,18
EXCHANGER SAFETY VALVE CALIBRATION PRESSURE (12 Bar) MPa| 1,2
MAINS WATER PRESSURE (MAX) TR EVISO LX – TREVISO LX 1500W (6 Bar) MPa|
0,6
The weighted sound pressure level A of the coffee maker is less than 70dB.
For correct appliance operation and trouble-free maintenance, please read this
booklet carefully and comply with the instructions and rules, also referring
to the diagrams given in it.
INSTALLATION
Before installing the appliance ensure that the mains voltage and power correspond to the data given in the technical details table. Take the appliance out of the packaging and put it in its final place of installation ensuring that it is stable and safe and that there is the necessary space for using it.
Electrical connection
Before connecting the power cord to the mains supply, check that
- THE ELECTRICAL SYSTEM IS EFFICIENTLY EARTHED
- CHECK THAT THE DATA ON THE RATING PLATE CORRESPOND TO YOUR MAINS ELECTRICITY SUPPLY.
Water connection
- Only cold water must be supplied to the appliances.
- In the TREVISO version (Vibration pump) take out the container, rinse it, fill it and put it back in place, reinserting the tubes, and replace the cap.
- In the TREVISO LX and TREVISO LX 1500W version connect the hose to the mains water supply and then to the water softener and to the appliance; if the mains water pressure exceeds 6 bar a pressure reducer must be installed to regulate the outlet pressure to a maximum of 6 bar.
N.B. Version TREVISO LX – TREVISO LX 1500W : a water softener is
indispensable for correct appliance operation, best coffee in the cup and long
life of the components, since it removes lime and residues from the water that
would otherwise shorten their life.
The company is relieved of all and any liability in the event of failure to
comply with the above instructions.
USE
Preliminary check
Before using the appliance, check that
- The plug is inserted properly into the mains power outlet.
- In the TREVISO LX and TREVISO LX 1500W version, the filling hose is correctly connected to the mains water outlet and that the water tap is open; also check for leaks.
With the steam tap (HH) open, put the on/off switch (CC)to the ON position and
wait for the water in the boiler to reach the maximum level set by the
electronic control.
Wait for steam to come out the steam nozzle (HH), then close the tap and,
using the boiler pressure gauge, check that the pressure has reached and
maintains a value of 0.8:1 bar. If it is not on this value, turn the adjusting
screw on the pressure switch (+increase, – decrease).
-
Hot water
To dispense hot water, make sure that the boiler pressure gauge indicates a pressure of 0.8÷1.3 bar. Turn the tap knob ( BB) counter-clockwise.
Take great care as there is a risk of scald burns. -
Steam
Swivel steam nozzle. To dispense steam, just turn the knob ( HH) counter- clockwise. Take great care as there is a risk of scald burns. -
Coffee
Insert the filter-holder (EE) into the group head (DD) turning the filter- holder counter-clockwise. Raise the lever (LL), wait for the required quantity of coffee to be dispensed and then lower the lever (LL) to its original position.
CLEANING
- Filter : After having dispensed the last cup of coffee the filter and filter-holder must be washed with water. If they are damaged, worn or clogged, they should be replaced.
- Drip tray and grid : The drip tray and grid should be removed frequently and coffee residues cleaned away.
- Water softener : TREVISO LX – TREVISO LX 1500W the softener should be periodically regenerated according to the manufacturer s directions given in the instruction booklet.
- External housing: The external housing and the steel parts should be cleaned with sponges and soft cloths to avoid scratching. Only use detergents that do not contain abrasive powders or solvents and do not use steel wool.
WARNINGS : when using the appliance it is recommended that the various instruments be kept under control, checking that they are in the previously indicated normal working conditions.
APPLIANCE MALFUNCTION
The user must check that this is not due to
- Power failure or blackout –
- Version TREVISO LX TREVISO LX 1500W no mains water supply or no water inside the boiler.
- For the TREVISO (Vibration pump) version, ensure that there is water in the container.
For any other causes, contact a qualified SANREMO After-Sales Service Centre.
BEFORE CARRYING OUT ANY WORK INSIDE THE APPLIANCE OR REMOVING ANY PART OF THE
HOUSING, ALWAYS DISCONNECT FROM THE ELECTRICAL SUPPLY.
WARRANTY
The appliance is guaranteed against defects due to faulty workmanship for 24 months from the date of purchase. The warranty is invalidated if the appliance has been misused or tampered with by unqualified personnel. Any parts which are shown to the SANRSANREMOEMO After-r-Sales Service Centre s satisfaction to be defective due to faulty materials or workmanship, shall be replaced free of charge.
WARNINGS
- The appliance must not be cleaned using a water jet.
- Do not put the appliance in water.
- The appliance must not be positioned near to any source of heat.
- The appliance is unsuitable for outdoor installation.
- To ensure safe use the appliance must be in a level position.
- If the power cable is damaged, have it replaced by a SANREMO After-Sales Service Centre, since a special tool is required for this purpose.
- The appliance must be used in rooms with a temperature between 5°C and 35°C.
IN THE EVENT OF FAILURE OR MALFUNCTION, REQUEST SERVICE ONLY FROM QUALIFIED PERSONNEL AT THE AFTER-SALES SERVICE CENTRE.
The data and features indicated in this booklet are not binding on the
manufacturer, which reserves the right to make changes to its models at any
time.
The manufacturer shall not be under any liability for injury to persons or
damage to property arising from failure to comply with the instructions given
in this booklet.
INFORMATION FOR USERS
- In accordance with article 13 of legislative decree no. 151 “Implementation of directives 2002/95/EC, 2002/96/EC and 2003/108/EC on restriction of the use of certain hazardous substances in electrical and electronic equipment and the disposal of waste”.
- The appliance or packaging is marked with the symbol of a bin with a cross to indicate that at the end of its working life it must be disposed of separately from other waste.
- Separate collection of this appliance at the end of its working life is organized and managed by the manufacturer.
- The user wanting to dispose of this appliance should therefore contact the manufacturer and follow the separate waste collection system to dispose of the appliance at the end of its working life.
- Appropriate separate collection and the subsequent recycling, treatment and ecological disposal of the disused appliance help avoid possible negative effects on the environment and health and encourage the re-use and/or recycling of the constituent materials.
- The unlawful disposal of the product by the user is punishable by the administrative sanctions provided for by the legislation in force at the time.
mod. TREVISO
mod. TREVISO LX – TREVISO LX 1500W
Parts
- A – Power indicator light B – Water tap knob
- C – On/off switch
- D – Group head
- E – Filter-holder
- F – Drip tray
- G – No water indicator light
- H – Steam tap knob
- I – Boiler pressure gauge
- L – Coffee dispensing lever
- M – Pump pressure gauge
- N – Water filling stay pipe
Exploded view mod.“ TREVISO”
TREVISO WIRING DIAGRAM
- Level control
- Water vacuum micro switch
- Pressure switch micro switch
- Filter unit micro switch
- Level sensor
- On/Off switch
- Pump
- 2-way solenoid valve
- Power on indicator light
- Water indicator light
- Manual rest thermostat
- Heating element
TREVISO LIST
POS. | CODE | DESCRIPTION |
---|---|---|
1 | 10853081 | HEXAGON NUT 1/4″ |
2 | 10040048 | SERRATED WASHER D.14.5X24X1 ZN |
3 | 10852040A | TAP EXTENSION |
4 | 10402113 | CHROMED TAP |
5 | 10402085 | TAP KNOB |
6 | 10809012 | NUT 6MA ZN |
7 | 10402088 | TAP KNOB BLACK CAP |
8 | 10402126A | WATER NOZZLE WITH ANTI-SCALD RUBBER PROTECTION |
9 | 10753050 | ANTI-SCALD RUBBER PROTECTION |
10 | 10002342 | BOILER PRESSURE GAUGE TUBE |
11 | 10805512 | MEDIUM-HT. NUT 4MA ZN |
12 | 10805562 | PLAIN WASHER D.4x16x1.5 ZN |
13 | 10012136 | PRESSURE GAUGE BRACKET |
14 | 10552016 | BOILER PRESSURE GAUGE |
15 | 10002632 | BOILER D.100XH181 |
16 | 10853224A | SWIVEL QUICK-FIT ELBOW 4 X 1/4″ M |
17 | 10115030 | 125° THERMOSTAT WITH MAN. RESET |
18 | 10853218 | LOWER EXCH. CONNECTION FOR BOILER |
19A | 10452021A | HEATING ELEMENT 1300W 120V |
19B | 10452020A | HEATING ELEMENT 1300W 230V |
20 | 10502018 | WASHER D. 52X41X2mm. PTFE |
21 | 10002346 | LOWER EXCHANGER PIPE |
22 | 10853201 | SWIVEL QUICK-FIT ELBOW 4X1/8″ M |
23 | 10042019 | INJECTOR D.6 |
24 | 10655557 | EXPANSION VALVE |
25A | 10553030 | GREEN INDICATOR LIGHT 120V |
25B | 10553034 | GREEN INDICATOR LIGHT 230V |
26 | 10553064 | ON-OFF PLATE |
27 | 10955013 | HOT SURF. SYMBOL TRIANG. LABEL |
28 | 10852092 | STRAIGHT REDUCER 3/8″ M-1/4″F |
29 | 10855032A | STRAIGHT COUPLER 8-1/4″M |
30 | 10852540 | TAP CONNECTOR 1/4″M |
31 | 10852180 | COPPER WASHER 1/4″ |
32 | 10652040 | BOILER RELIEF VALVE |
33 | 10052165 | FILTER HEAD LEVER GRIP |
34 | 10052141 | FILTER HEAD DIFFUSER |
35 | 10052120 | FILTER HEAD MESH SHOWERHEAD |
36 | 10502110 | UNDER-CUP GASKET H 8.2mm |
37A | 10553031 | RED INDICATOR LIGHT 120V |
37B | 10553036 | RED INDICATOR LIGHT 230V |
38 | 10502130 | LEVER ASSEMBLY SEAL |
39 | 10052134 | ASSEMBLY STUD BOLTS |
40 | 10802500 | MEDIUM-HT. NUT 8MA ZN |
41 | 10803538 | SERRATED WASHER D.8.2 ZN |
42 | 10052005 | COMPLETE LEVER ASSEMBLY |
43 | 10024098 | DRIP TRAY |
44 | 10402118 | INCLINED 2-CUP FILTER-HO LDER ASSEMBLY |
POS. | CODE | DESCRIPTION |
--- | --- | --- |
45 | 10955018 | SAN REMO LOGO LABEL |
46 | 10402116 | INCLINED 1-CUP FILTER-HOLDER ASSEMBLY |
47 | 10002350A | HOT WATER DRAW-OFF PIPE |
48A | 10602050 | PRESSURE SWITCH 120V |
48B | 10602060 | PRESSURE SWITCH 230V |
49 | 10002348A | STEAM OUTLET PIPE |
50 | 10853059 | SUCTION PIPE |
51 | 10112059 | LEVEL SENSOR 105mm |
52 | 10853216 | UPPER EXCH. CONNECTION FOR BOILER |
53 | 10052153 | JET HOLE D. 3 mm |
54 | 10002344 | UPPER EXCHANGER PIPE |
55 | 10852210 | ELBOW 1/8″ M-F |
56 | 10853062 | OUTLET STRAIGHT CONNECTOR 1/8″M |
57 | 10853222 | OUTLET CONNECTOR WYE |
58 | 10112052 | LEVER CONTROL MICROSWITCH W/NUT |
59 | 10024170 | PROTECTIVE FRONT PLATE |
60 | 10024180A | STAINLESS STEEL DRAIN PLATE |
61 | 10352045 | SMOKE-GREY CUP GUARD |
62 | 10805027 | SCREW TRUSS-HEAD- M4x10 A2 |
63 | 10024165 | TOP COVER |
64 | 10024168 | WATER TANK COVER |
65 | 10024064A | BLACK ENAMELLED FRAME |
66 | 10955025 | EARTH SYMBOL TRIANG. LABEL |
67 | 10553060 | TWO-POLE LEVER SWITCH |
68A | 10022356 | POLISHED ANOD. AL. LEFT EXTRUDED PIECE |
68B | 10022366 | BLACK ANOD. AL. LEFT EXTRUDED PIECE |
69 | 10805060 | SCREW (HEX CH. SOCK.) M4X6 A2 UNI 5931 |
70 | 10803519 | SERRATED WASHER D.4.2 ZN DIN 6798 |
71A | 10022354 | POLISHED ANOD. AL. RIGHT EXTRUDED PIECE |
71B | 10022364 | BLACK ANOD. AL. RIGHT EXTRUDED PIECE |
72 | 10024192A | BLACK ENAMELLED BOTTOM PLATE |
73 | 10402128A | STEAM NOZZLE WITH ANTI-SCALD RUB. PROT. |
74A | 10255011 | VIBRATION PUMP 120V 60HZ |
74B | 10255018 | VIBRATION PUMP 230V 50Hz |
75 | 10011524 | PUMP BRACKET |
76 | 10255030 | L-SHAPED TUBE |
77 | 10955030 | LABEL IN 4 LANG. “CUT-OFF POWER SUPPLY” |
78 | 10112202 | COVER MAGNET |
79 | 10024196A | BLACK ENAM. WATER VAC. MICRO. BRACKET |
80A | 10105010 | GLAND FOR CABLE HO5VV-F |
80B | 10105012 | GLAND FOR CABLE 3X16AWG |
81A | 10112011 | LEVEL CONTROL 120V |
81B | 10112010 | LEVEL CONTROL 230V |
82 | 10805077 | SCREW (HEX CH. SOCK.) M4X8 A2 UNI 5931 |
83 | 10801032 | SCREW (HEX FLAT. SOCK.) M5X12 A2 UNI 5933 |
84 | 10803520 | SERRATED WASHER D5.3 ZN |
85 | 10352056 | FOOT |
POS. | CODE | DESCRIPTION |
--- | --- | --- |
86 | 10024160 | HOUSING |
87A | 10102224 | POWER CABLE SJT 3AWG16X2MT USA |
87B | 10105131 | POWER CABLE H05VV-F 3X1X2MT SCHUKO |
88 | 10909010 | TEFLON TUBE D4X2.5 |
89 | 10809019 | SCREW (HEX CONV.SO.) M3X8 BURNISHED |
90A | 10303018 | 2-WAY SOLENOID VALVE 1/8″ 120V |
90B | 10303010 | 2-WAY SOLENOID VALVE 1/8″ 230V |
91 | 10853223 | CONICAL TEE 1/8″ M/M/F |
92 | 10652027 | SINGLE-ACTING VALVE |
93 | 10805022 | SCREW TRUSS HEAD- M4X20 A2 POLIERS |
94 | 10809002 | PLAIN WASHER D6.4X24X2 ZN |
95A | 10102516 | TREVISO WIRING 120V |
95B | 10102506 | TREVISO WIRING 230V |
96 | 10955029 | LABEL IN 4 LANG.”EARTH CONNECTION” |
97 | 10905010 | NEUTRAL SILICONE TUBE D.7X4 MM |
98 | 10355178 | TANK IMPURITY FILTER |
99 | 10355100 | TANK CAP D.41 |
100 | 10353500 | TANK HANDLE |
101 | 10353243 | TANK L 3.4 H=280mm |
102 | 10402046 | WATER VACUUM MICRO SPRING. |
103 | 10809000 | NUT M12X0.75 FOR MICRO |
104 | 10355027 | WATER VACUUM MICRO. SPACER |
POS. | CODE | DESCRIPTION |
--- | --- | --- |
105 | 10112046 | WATER VACUUM MICROSWITCH |
106A | 10255070 | TREVISO CONNECTOR 120V |
106B | 10255068 | TREVISO CONNECTOR 230V |
107 | 10402129A | CAPPUCCINO-MAKER NOZZLE |
108 | 10402139 | NUT FOR 1/4 FITTING CAPP-MAKER NOZZLE |
109 | 90011015 | WHITE CAPP. ELBOW |
110 | 90011014 | INJECTOR+CAPPUCCINO-MAKER O RING |
111 | 90011011 | WHITE CAPPUCCINO-MAKER BODY |
112 | 10402068 | O RING 106 NBR D6.75X1.78 CAPP INJECTOR. |
113 | 10903010 | NEUTRAL SILICONE TUBE D.6X3.5 L33.5CM |
114 | 10052220 | BLIND FILTER |
115 | 10052110 | 2-CUP FILTER |
116 | 10052100 | 1-CUP FILTER |
117 | 10052050 | FILTER SECURING SPRING |
118 | 10052085 | 2-WAY SPOUT |
119 | 10052080 | SINGLE SPOUT |
120 | 10502041 | O RING 2025 EPDM D6.07X1.78 WATER DIFFUSER |
121 | 10505018 | O RING 6 EPDM D.7.2X1.9 WATER SHOWERHEAD |
122 | 10402140 | WATER DISPENSING SHOWERHEAD |
123 | 10355030 | DISPENSING LEVER MICROSWITCH SPACER |
124 | 10853204 | QUICK-FIT STRAIGHT COUPLER 4X1/8″M |
Exploded view mod.“ TREVISO”LX 1500
TREVISOLX WIRING DIAGRAM
- Level control
- Pressure switch micro switch
- Filter unit micro switch
- Level sensor
- On/Off switch
- Pump
- 2-way solenoid valve
- Power on indicator light
- Manual reset thermostat
- Boiler heating element
TREVISO LX – TREVISO LX 1500W LIST
POS. | CODE | DESCRIPTION |
---|---|---|
1 | 10853081 | HEXAGON NUT 1/4″ |
2 | 10040048 | SERRATED WASHER D14.5X24X1 ZN |
3 | 10852040A | TAP EXTENSION |
4 | 10402113 | CHROMED TAP |
5 | 10402085 | TAP KNOB |
6 | 10809012 | FLANGED NUT 6MA |
7 | 10402088 | TAP KNOB BLACK CAP |
8 | 10402126A | WATER NOZZLE WITH ANTI-SCALD RUBBER PROTECTION |
9 | 10753050 | ANTI-SCALD RUBBER PROTECTION |
10 | 10805531 | NUT 5MA ZN |
11 | 10402128A | STEAM NOZZLE WITH ANTI-SCALD RUBBER PROTECTION. |
12 | 10012138 | PRESSURE GAUGE FIXING BRACKET |
13 | 10552015 | DOUBLE-SCALE PRESSURE GAUGE D.60 |
14 | 10002342 | BOILER PRESSURE GAUGE TUBE |
15 | 10002018 | PUMP PRESSURE GAUGE TUBE |
16 | 10955013 | HOT SURFACE TRIANG. LABEL |
17 | 10002634 | BOILER D.120 L.1.8 |
18 | 10853224A | QUICK-FIT SWIVEL ELBOW 4 X 1/4″ M |
19 | 10115030 | 125° THERMOSTAT WITH MAN. RESET |
20 | 10853218 | LOWER EXCH. CONNECTION FOR BOILER |
21A | 10452024 | HEATING ELEMENT 1500W 230V |
21B | 10452026 | HEATING ELEMENT 1500W 120V |
22 | 10502018 | WASHER D.52X41X2mm PTFE |
23 | 10002356 | LOWER EXCHANGER PIPE |
24 | 10853201 | QUICK-FIT SWIVEL ELBOW 4X1/8″ M |
25 | 10042019 | INJECTOR D.6 |
26 | 10655557 | EXPANSION VALVE |
27 | 10852092 | STRAIGHT REDUCER 3/8″ M-1/4″F |
28 | 10855032A | STRAIGHT COUPLER 8-1/4″M |
29 | 10852540 | TAP CONNECTOR 1/4″M |
30 | 10852180 | COPPER WASHER 1/4″ |
32A | 10553030 | GREEN INDICATOR LIGHT 120V |
32B | 10553034 | GREEN INDICATOR LIGHT 230V |
33 | 10553064 | ON-OFF PLATE |
34 | 10052165 | FILTER HEAD LEVER GRIP |
35 | 10052141 | FILTER HEAD DIFFUSER |
36 | 10052120 | FILTER HEAD MESH SHOWERHEAD |
37 | 10502110 | UNDER-CUP GASKET H 8.2mm |
38 | 10502130 | LEVER ASSEMBLY SEAL |
39 | 10052134 | ASSEMBLY STUD BOLTS |
40 | 10802500 | MEDIUM-HT. NUT 8MA ZN |
41 | 10803538 | SERRATED WASHER D.8.2 ZN |
42 | 10052005 | COMPLETE LEVER ASSEMBLY |
43 | 10024098 | DRIP TRAY |
44 | 10402118 | INCLINED 2-CUP FILTER-HOLDER ASSEM. |
POS. | CODE | DESCRIPTION |
--- | --- | --- |
45 | 10955018 | SAN REMO LOGO LABEL |
46 | 10402116 | INCLINED 1-CUP FILTER –HOLDER ASSEMB |
47 | 10002360 | HOT WATER DRAW-OFF PIPE |
48A | 10602050A | PRESSURE SWITCH 120V |
48B | 10602060A | PRESSURE SWITCH 230V |
49 | 10002358 | STEAM OUTLET PIPE |
50 | 10853059 | SUCTION PIPE |
51 | 10112059 | LEVEL SENSOR 105mm |
52 | 10853216 | UPPER EXCH. CONNECTION FOR BOILER |
53 | 10052153 | JET HOLE D. 3 mm |
54 | 10002354 | UPPER EXCHANGER PIPE |
55 | 10852210 | ELBOW 1/8″ M-F |
56 | 10853062 | STRAIGHT OUTLET CONNECTOR 1/8″M |
57 | 10853222 | OUTLET CONNECTOR WYE |
58A | 10022356 | POLISHED ANOD. AL. LEFT EXTRUDED PIECE |
58B | 10022366 | BLACK ANOD. AL. LEFT EXTRUDED PIECE |
59 | 10553060 | TWO-POLE LEVER SWITCH |
60 | 10112052 | CONTROL LEVER MICROSWITCH W/NUT |
61 | 10024172 | PROTECTIVE FRONT PLATE |
62 | 10024180A | STAINLESS STEEL DRAIN PLATE |
63 | 10352045 | SMOKE-GREY CUP GUARD |
64 | 10805027 | SCREW TRUSS HEAD- M4x10 A2 |
65 | 10024166 | TOP COVER |
66 | 10905010 | NEUTRAL SILICONE TUBE D.7X4mm |
67 | 10024064A | BLACK ENAMELLED FRAME |
68 | 10955025 | EARTH SYMBOL TRIANG. LABEL |
69 | 10805060 | SCREW (HEX CH. SOCK.) M4X6 UNI 5931 |
70 | 10803519 | SERRATED WASHER D4.2 ZN DIN 6978 |
71A | 10022354 | POLISHED ANOD. AL. RIGHT EXTRUDED PIECE |
71B | 10022364 | BLACK ANOD. AL. RIGHT EXTRUDED PIECE |
72 | 10024192A | BLACK ENAMELLED BOTTOM PLATE |
75A | 10112010 | LEVEL CONTROL 230V |
75B | 10112011 | LEVEL CONTROL 120V |
76A | 10105010 | GLAND FOR CABLE HO5VV-F |
76B | 10105012 | GLAND FOR CABLE 3X16AWG |
77 | 10805077 | SCREW (HEX CH. SOCK.) M4X8 A2 UNI 5931 |
78 | 10801032 | SCREW (HEX FL. SOCK.) M5X12 A2 UNI 5933 |
79 | 10803520 | SERRATED WASHER D.5.3 ZN |
80 | 10352056 | FOOT |
81 | 10024160 | HOUSING |
82A | 10102224 | POWER CABLE SJT 3AWG16X2MT USA |
82B | 10105131 | POWER CABLE H05VV-F 3X1X2MT SCHUKO |
83 | 10852450 | STAY PIPE 3/8″ L2000 |
84 | 10852290A | STRAIGHT COUPLER 10-3/8″M-M |
85 | 10252060 | ROTARY PUMP |
POS. | CODE | DESCRIPTION |
--- | --- | --- |
86A | 10252082 | ELECTRIC MOTOR 120W 120V |
86B | 10252084 | ELECTRIC MOTOR 120W 230V |
87 | 10652027 | SINGLE-ACTING VALVE |
88 | 10805512 | MEDIUM-HT. NUT 4MA ZN |
89 | 10255022 | PUMP VIBRATION ISOLATION MOUNTING |
90A | 10102508 | ROTARY PUMP WIRING 230V |
90B | 10102518 | ROTARY PUMP WIRING 120V AWG |
91 | 10955029 | LABEL IN 4 LANG. “COMP. EARTH CONN.” |
92 | 10355030 | SPACER FOR LEVER CONTROL MICROSWITCH |
93 | 10853223 | CONICAL TEE 1/8″ M/M/F |
94 | 10809019 | SCREW (HEX CONV.SO.) M3X8 BURNISHED |
95A | 10303010 | 2-WAY SOLENOID VALVE 1/8″ 230V |
95B | 10303018 | 2-WAY SOLENOID VALVE 1/8″ 120V |
96 | 10909010 | TEFLON TUBE D.4X2.5 |
97 | 10852521 | STRAIGHT REDUCER 3/8″M-1/8″F |
98 | 10502041 | NOZZLE O RING 2025 EPDM |
POS. | CODE | DESCRIPTION |
--- | --- | --- |
99 | 10505018 | WATER SHOWERHEAD O RING EPDM OR6 |
100 | 10402140 | WATER DISPENSING SHOWERHEAD |
101 | 10402129A | CAPPUCCINO-MAKER NOZZLE |
102 | 10402139 | NUT FOR 1/4″ FITTING CAPPUCCINO-MAKER NOZZLE |
103 | 90011015 | CAPPUCCINO-MAKER ELBOW |
104 | 90011014 | INJECTOR+CAPPUCCINO-MAKER O RING |
105 | 90011011 | WHITE CAPPUCCINO-MAKER BODY |
106 | 10402068 | O RING 106 NBR CAPP. INJECTOR |
107 | 10903010 | SILICONE TUBE 6X3.5 L=33.5CM |
108 | 10052220 | BLIND FILTER |
109 | 10052110 | 2-CUP FILTER |
110 | 10052100 | 1-CUP FILTER |
111 | 10052050 | FILTER SECURING SPRING |
112 | 10052085 | 2-WAY SPOUT |
113 | 10052080 | SINGLE SPOUT |
114 | 10505562 | COPPER BUSHING |
Spare parts order form
Tab. | Ref. | Code | Description | Quantity |
---|
|
|
|
|
- Customer :Send it to
- Date
- SANREMO S.r.l.
- 31050 VASCON di CARBONERA (TV) – Italy – Via Bortolan –
- Tel. +39.0422.448900
- Fax +39.0422.448935
- SANREMO PASSION / PERFORMANCE / STYLE
- SANREMO s.r.l.
- Via Bortolan, 52
- Zona Industriale Treviso Nord 31050 Vascon di Carbonera (TV)
- tel. +39 0422 448900
- fax +39 0422 448935
- www.sanremomachines.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>