Refoss MSL320CP Smart LED Strip Light User Manual

Refoss MSL320CP Smart LED Strip Light

Safety Information

1. The LED light strip consumes DC 12V power. NEVER connect it to DC 24V.
2. Do NOT immerse the light strip/controller/power adapter into water.
3. Do NOT light the strip on for over Ss while it is rolled on the plastic reel.
4. Radio-frequency/ Max transmission power: 2400-2483.SMHz. 20dBm.

Package Contents

If you find any part missing in the package, please contact
https://refoss.net/support/Email_Support. We will provide a proper solution for you.

**Installation Guide

**

1. Download the Refoss app. ****

2. Connect the power cable and power the device up.

3. Set up the device.

4. Make sure your smart device is covered by a strong Wi-Fi signal.

5. Launch the Refoss app and log in to your account, or if you are a new user, tap Sign up to create a new account.

6. Tap the”+” icon to select the type of smart device you want to add, then you can just follow the setup wizard to finish the configuration.

7. Relocation of the smart device does not require additional operations provided that it remains on the same network with a strong Wi-Fi signal.
   NOTE,

8. If this is not the first time you’ve added this smart device, you’ll have to reset it before going any further.

9. Find more at https://www.refoss.net/support

10. Use the provided clips or the tape on the light strip to hang or attach the device to the place you desire. Note : Please be careful not to tear off the adhesive tape.

NOTE
Please make sure the surface is smooth. dry. clean. DO NOT stick the LED strip on such surfaces, such as knitted/wool fabrics, dust walls, rough plastic surfaces, or frosted glass.

Tips , How to make a 90-degree turn with the smart LED light strip?

LED and Button Rules

1. CD LED light strip:
   Flash 3 times to enter into configuration mode.
   Flash smoothly from Red to Green to Blue to Warm to Cold White: Successfully connected.

2. Power:
   Short press to turn the light strip ON/OFF.
   Long press Ss to factory reset the light strip.

How to Use

1. General Settings Device name : Change device name.
   User manual: Check the user manual.

2. . Voice Control

3. Amazon Alexa & Google Assistant: Check how to pair Amazon Alexa and Google Assistant under User->lntegration.

Amazon Alexa :
The example commands are as follows:

• Alexa set the smart light strip to red.”
• Alexa, set the smart light strip warmer.”
• “Alexa, dim smart light strip by 30%.”

Google Assistant:
The example commands are as follows:

• Hey Google, brighten the smart light strip.”
• Hey Google, set the smart light strip to cool light.”
• Hey Google, change the smart light strip to magenta

FAQ

At Refoss. we strive to assure your satisfaction. Attached below is a non- exhaustive list of questions that users are mostly concerned about.

1. Can I cut and splice the light strip?
   Yes, the light strip is cutable. Please use the provided connector to splice the 2 light strips. as the output of the provided power adapter is only 12V/1.5A. it can support powering up a light strip of 16.8ft long or less. NOTE,
   Please make sure that the metal terminals are exposed and meet each other.

2. How do I reset my Smart Wi-Fi LED Light Strip?
   Press and hold the power button for 5 seconds. it will reset and enter Wi-Fi configuration mode. Note that factory reset will erase all your custom settings, and you’ll have to set it up again.

3. What should I do when my Refoss app is unable to control the added Smart Wi-Fi LED Light Strip?
   Please check the following:

   • Check the main Wi-Fi internet connection.
   • Make sure the main Wi-Fi password hasn’t been changed.
   • Hold the button for 5 seconds to reset it and try to add it again.

Warranty

Refoss products are covered by a 24 months-limited warranty from the date of their original purchase. If any problems occur. please contact support@refoss.net for help.
We can only provide aftersales service for products that are sold by Refoss or Refoss-authorized retailers and distributors.

Disclaimer

1. The function of this smart device is tested under a typical circumstance described in our specifications. Refoss does NOT guarantee that the smart device shall perform exactly the same as described under all circumstances.
2. By using third-party services including but not limited to Amazon Alexa. Google Assistant. Apple HomeKit and SmartThings, customers acknowledge that Refoss shall not be held liable in any way for the data and private information collected by such parties. Refoss’s total liability is limited to what is expressly covered in its Privacy Policy.
3. Damages arising from ignorance of the SAFETY INFORMATION shall not be covered by Refoss aftersales service, nor does Refoss take any legal responsibility therefrom.
   Customers acknowledge their understanding of these articles clearly by reading this manual

SIMPLE DEVICE
SIMPLIFY YOUR LIFE
Email: support@refoss.net Website: www.refoss.net

Manufacturer: Chengdu Meross Technology Co., Ltd. Address: Floor 3, Building A5, Shijicheng Road No 1 129, Caoxin, Free Trade Trial Zone, Chengdu, Sichuan, China.
CET PRODUCT SERVICE LTD. (for authorities only) Beacon House Stokenchurch Business Park, Ibstone Rd, Stokenchurch High Wycombe HP14 3FE UK

Made in China Indoor Use Only

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>