SW-MOTECH HPR.00.220.14500-B BBstorm Black Hand Guards Instructions

: August 7, 2024
: SW-MOTECH

Table of Contents

SW-MOTECH HPR.00.220.14500-B BBstorm Black Hand Guards
Product Information
Product Usage Instructions
Frequently Asked Questions (FAQ)
INTRODUCTION
GENERAL INFORMATION
PRODUCT SPECIFIC INFORMATION
PART LIST
MOUNTING
Mounting Instructions
ACCESSORIES
ABOUT COMPANY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SW-MOTECH HPR.00.220.14500-B BBstorm Black Hand Guards

Product Information

Specifications

Model Numbers : HPR.00.220.14500/B, HPR.00.220.83200/B, HPR.00.220.10000/B
Color: Black
Material: High-quality plastic
Dimensions: Vary based on model

Product Usage Instructions

Assembly
To assemble the product, follow these steps:

Identify all the components in the package.
Refer to the assembly manual for detailed instructions.
Use the provided tools for assembly.
Ensure all parts are securely connected before use.

Installation
Follow these steps for installation:

Select a suitable location for the product.
Secure the product in place according to the installation manual.
Verify that the product is stable and level.

Operation
Operating the product:

Read the user manual for operational guidelines.
Power on the product using the designated button or switch.
Adjust settings as needed for your requirements.

Maintenance
To ensure product longevity:

Clean the product regularly with a damp cloth.
Avoid using harsh chemicals that may damage the surface.
Inspect for any loose parts and tighten if necessary.

Frequently Asked Questions (FAQ)

How do I clean the product?
To clean the product, use a damp cloth with mild soap and water. Avoid abrasive cleaners that may scratch the surface.
Can I disassemble the product for storage?
Yes, you can disassemble the product following the reverse steps of assembly. Store the components in a dry and safe place.

INTRODUCTION

Thank you for choosing this premium product from SW-MOTECH. Please visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required (e.g. ABE certifications), are also available for download at our webshop. Installation and/or maintenance of this product require good technical understanding! For your own safety SW-MOTECH recommends having installation and/or servicing carried out by a specialist workshop!
SW-MOTECH assumes no liability for damage caused by improper installation and/or maintenance work!
Carefully follow all the directions given in the mounting instructions and pay attention to all relevant information in the vehicle manual during assembly. Nonconformance can lead to vehicle damage or even endanger the driver! These mounting instructions are written based on our current state of knowledge. Legal requirements for accuracy do not exist.
This product was developed for vehicles in their factory setting. Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Furthermore, BEFORE installing this product, make sure that all moving parts (e.g. the chain) are in the original state of maintenance. Installed accessories can change the driving behaviour and/or stability of your vehicle.

GENERAL INFORMATION

Observe the country-specific regulations concerning vehicle registration/ operation as well as TÜV regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority. PREPARATION: Read the mounting instructions carefully and make sure that all items of the parts list are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools. Have another person to help you.
MOUNTING : All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturers’ specifications or replaced by parts delivered by SW-MOTECH. Secure all threads, unless otherwise specified, with medium-strength liquid thread locker.
Torque specifications undefined by SW-MOTECH must be obtained from the vehicle manufacturer or by a specialist workshop!
FUNCTION CHECK: After installation make sure that all parts and connections previously removed are properly replaced. Also make sure that no moving parts are obstructed and no function of the vehicle is hindered in any way. Cables and hoses must not rub and/or be pinched. Before starting to ride, perform a comprehensive check of all functions. After the first 50 km and then at regular intervals, check the tightening torque of all screw connections and the proper fit of the product.

PRODUCT SPECIFIC INFORMATION

After the installation check all operations of all handlebar controls, specifically the throttle, front brake, kill switch and clutch, to ensure they are operating correctly and are in accordance with the OEM specifications. Do not ride the vehicle if any controls are not operating correctly. It may be necessary to move the brake and clutch controls toward the handlebar end by a few millimeters to achieve a correct fit.
Make sure the handlebar can fully turn in either direction. If parts of the product makes contact with the tank at full steering lock, it may be necessary to rotate the handlebar up (forward) slightly to allow adequate clearance.

PART LIST

MOUNTING

Premovement of the original handlebar end weight with internal weight parts.
On the left side, roll back the hand grip and depress the two retaining clips through the holes in the handlebar with a screwdriver. There is one top and one bottom.
To access the holes on right side, unscrew the throttle housing and separate the two halves enough to slide the twist grip in from the end.
Leave the handlebar weight connected to the internal weight to help with removing the internal parts.
Pull on the weight while pressing the clips through the holes.
NOTE: The Installation is shown for the left side. The installation on the right side of the vehicle is analogous to the left side of the vehicle. Attach the handlebar clamps (1) with the connectors (2) loosely to the handlebar. Do not fully tighten the screws yet.
Attach the shown parts loosly to the backbones (6), as shown in the upper drawing.
ATTENTION: Use liquid thread locker!
Do not fully tighten the screws yet.
Mount the backbones (6) loosely to the handlebar ends, as shown in the lower drawing.
ATTENTION: Use liquid thread locker!
Do not fully tighten the screws yet.
Attach the inner ends of the bars (6) to the connectors (2).
ATTENTION: Use liquid thread locker!
Do not fully tighten the screws yet.
Position the bars (6) in preferred position and tighten all screws in the following order: (7), (13), (3) & (4).

Mounting Instructions

ATTENTION: The assembly of this product can be complicated and requires a good technical on dersta dings, nave a specisury. garage perform the mounting and service. SW-MOTECH accepts no liability for damages caused by improper installation.
ATTENTION: After the installation check all operations of all handlebar to auro they are operating guin, correctly and are in accordance with the OEM specifications. Do not ride the motorcycle if any controls are not operating correctly. Make sure the handlebar can fully turn in either direction. Check periodically (50 km) that all bolts are tight.
Subject to change. Not responsible for typos.
NOTE: Installation is shown for the left side. Repeat for right side with applicable parts.
Attach the handguard shells (1) & (2) to the backbones (before mounting the backbones to the vehicle), as shown in the drawing.
ATTENTION: Tighten the screws carefully by hand (max. 2 Nm). Do not overtighten the screws!