Atmel ATM90E3x Poly Phase Energy Metering Demo Board User Guide
- July 20, 2024
- Atmel
Table of Contents
Atmel ATM90E3x Poly Phase Energy Metering Demo Board User Guide
ATM90E3x Poly-Phase Energy Metering Demo Board
-
Connect the Control Board and the AFE Board.
HIGH VOLTAGE
WARNING
This kit Contains high voltage components please observe proper caution and ensure that safety measures are place during use -
Connect the Control Board to PC’s USB or COM port with cable.
-
Install USB-to-UART driver (the USB-to-UART port is isolated and self powered from USB).
-
Plug in DC power adapter (either the Control Board or the AFE Board is okay).
-
Copy and unzip to a folder.
-
Double click and run software.
| Communication Port | Baud Rate (bps) |
|---|---|
| USB (USB-to-UART) | 115200 |
| DB9 (RS232 | 4800 |
| RS485 | 4800 |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>