WAMPLER 10-15-18 Fuzztration Pedal User Manual
- June 4, 2024
- WAMPLER
Table of Contents
WAMPLER 10-15-18 Fuzztration Pedal User Manual
Finding the perfect fuzz/octave is pure frustration. We end that search with the Fuzztration.
Volume: Controls the total output of the pedal.
Bass: Cut or boosts bass response from subtle to earth-shattering levels.
Mids: Cuts or boosts the mids to find your level of fatness.
Treble: Cuts or boost the treble, help to achieve clarity which is where
many fuzzes struggle.
FUZZ: It’s a big knob for a reason. Use this like the savage weapon it
is, it’s all in here.
Octave position: Put that octave either before or after your fuzz. This
style of octave is more pronounced when playing higher on the neck, similar to
Octavian^ style.
Tone Voice: Changes the sound from a more aggressive fuzz with
compression, to a more open spongey vintage fuzz. Different sounds, different
feel, awesome tone on each side. ***Octavia” is a trademark of Roger Mayer,
and is in no way associated with Wampler or Boutique Amps Distribution.
Power: This pedal was designed around the usage of a 9v to 18vDC power source and is intended to sound its best at 9V. To avoid damage to the pedal, do not exceed 18vDC, do not use center pin positive adapters and do not use AC power. Using an incorrect power adapter can lead to damage and will void the warranty on the pedal. This pedal draws approximately 9V=18mA and 18v=23.3mA. The warranty begins at the point of purchase.
Warranty
WAMPLER Pedals Limited Warranty WAMPLER offers a five (5) year warranty to the original purchaser that this WAMPLER product will be free from defects in material and workmanship. A dated sales receipt will establish coverage under this warranty. This warranty does not cover service or parts to repair damage caused by accident, neglect, normal cosmetic wear, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures and service, repair or modifications to the product, which have not been authorized or approved by WAMPLER. If this product is defective in materials or workmanship as warranted above, your sole remedy shall be repair or replacement as provided below.
RETURN PROCEDURES
RETURN PROCEDURES In the unlikely event that a defect should occur, follow the
procedure outlined below. Defective products must be shipped, together with a
dated sales receipt, freight pre-paid and insured directly to WAMPLER SERVICE
DEPT – 5300 Harbor Street Commerce, CA 90040. A Return Authorization Number
must be obtained from our Customer Service Department prior to shipping the
product. Products must be shipped in their original packaging or its
equivalent; in any case, the risk of loss or damage in transit is to be borne
by the purchaser. The Return Authorization Number must appear in large print
directly below the shipping address. Always include a brief description of the
defect, along with your correct return address and telephone number. When
emailing to inquire about a returned product, always refer to the Return
Authorization Number. If WAMPLER determines that the unit was defective in
materials or workmanship at any time during the warranty period, WAMPLER has
the option of repairing or replacing the product at no additional charge,
except as set forth below. All replaced parts become a property of WAMPLER.
Products replaced or repaired under this warranty will be returned via ground
shipping within the United States-freight prepaid. WAMPLER is not responsible
for costs associated with expedited shipping, either to WAMPLER or the return
of the product to the customer.
INCIDENTAL OR CONSEQUENTIAL DAMAGE In no event is WAMPLER liable for any
incidental or consequential damages arising out of the use or inability to use
of any WAMPLER product, even if WAMPLER or a WAMPLER dealer has been advised
of the possibility of such damages, or any other claim by any other party.
Some states do not allow the exclusion or limitation of consequential damages,
so the above limitation and exclusion may not apply to you. This warranty
gives you specific legal rights and you may also have other rights which may
vary from state to state.
FOR YOUR PROTECTION
FOR YOUR PROTECTION Please complete the online warranty registration within (10) ten days of the date of purchase so that we may contact you directly in the event a safety notification issued in accordance with the 1972 Consumer Product Safety Act.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CUSTOMER SUPPORT
CUSTOMER SUPPORT Our dedicated staff is ready to help you with any warranty or product questions – please email us at help@wamplerpedals.com or call us at 765-352-8626
Please remember to register your pedal as soon as possible after purchase at the following web page to ensure quicker service if you should ever need to make a warranty claim: www.RegisterYourWampler.com For a more in depth manual visit: www.wamplerpedals.com/downloads/