Golvvi VO-1023G Automatic Aroma Diffuser User Manual

September 17, 2024
Golvvi

VO-1023G Automatic Aroma Diffuser

“`html

Product Specifications

Name| Models| Size| Material| Volume| Amount of atomization| Atomization time| Number of atomization| Work cycle| Battery
---|---|---|---|---|---|---|---|---|---
Automatic aroma diffuser| S-AC-BT-AD-090-9/0| 6.616.612.75 inches| PP| 100ml| 0.01-0.02ml/times| 3s/times| 1500 times/jars| From Monday to Sunday| 4 pcs AA alkaline batteries / Type-C 5.0V

Product Description

  • Type-C Charging Port

  • Wall Panels

  • Battery Case

  • Product Dimensions: 6.61 x 6.61 x 2.75 inches

  • ON/OFF button:

    • Long Press: Power on/off

    • Press Twice: Test Spray Mode

    • Press Three Times: Reset the number of spray times to zero (Red
      light and blue light flashing three times alternately)

    • Press Five Times: Restore the initial password (Buzzer sends a
      sound)

  • Indicator Light

  • Spray Nozzle

  • Atomized Head

  • Essential Oil Bottle: Fill with your favorite essential oil
    before use

  • Panel

Installation Instructions

  1. Screw drilling installation:

  2. Remove the wall panel and mark the screw hole position

  3. Drill 3 holes of 5mm diameter at the marked position and hang
    the wall plate with plastic expanding nails and screws

  4. Hang the product

  5. Use anti-theft screws to fix the screws in the anti-theft holes
    after drilling holes in the wall surface

  6. Put the essential oil bottle into the diffuser at the
    designated position

Product Maintenance

  1. Machine Cleaning:

  2. Please use a wet towel to clean the machine

  3. Please turn off and take out the battery when cleaning the
    inside of the machine

  4. If not used for a long time, clean the oil bottle and remove
    the battery

  5. Clean the oil bottles and atomizer heads:

  6. Remove the essential oil bottle and unscrew the atomizing
    head

  7. Add a small amount of alcohol, reload, rinse, and dry before
    reuse for improved performance and odor elimination

Troubleshooting

Problem Solutions
Not atomized or not working a. Check if the battery is fully charged

b. Check if the machine is in a shutdown state
c. Check whether the atomizer head is blocked
d. Check if the oil bottle is loose

FAQs

Q: How do I know when to refill the essential oil bottle?

A: It is recommended to refill the essential oil bottle when the
aroma diffusion weakens or runs out.

Q: Can I use any type of essential oil with this diffuser?

A: Yes, you can use any type of essential oil with this
diffuser, but spray amounts and times may vary depending on the oil
type.

“`

100140mm(600140mm) 80g

Product Specifications

Name Models Size Material Volume Amount of atomization Atomization time Number of atomization Work cycle Battery

Automatic aroma diffuser S-AC-BT-AD-090-9/0 6.616.612.75 inches PP 100ml 0.01-0.02ml/times 3s/times 1500times/jars From monday to sunday 4 pcs”AA” alkaline batteries / type-c 5.0v

Remarks: 1. Under normal conditions 100M can be atomized 1500 times, the above-mentioned atomization amount and times are only reference values, different types of essential oils are different in the amount of spray, spray times are also different. 2. Product power can be viewed through the small program, low-power buzzer every 300 seconds to send a beeping alarm, and send low-power information to the small program.

The indicator light provided a prompt by flashing

Status

Prompt Method

Power on

Blue LED

Turn off

Red LED

Reset the Password Buzzer

Reset Recorded Spray Times

Red/Blue LED

Low Power

Red/Blue LED

BLE Data

Buzzer

LED Action Flash twice, interval 2 seconds Flash twice, interval 1 seconds The buzzer beeped for 1s Red and blue leds flash alternately 3 times Blue LED light 0.5s-off 2s-light 0.5s, total 60s The buzzer beeps 2 times

Troubleshooting

Problem Malfunction

Solutions

a. Check if the battery is fully charged

Not atomized or not working

b. Whether the machine is in a shutdown state c. Check whether the atomizer head is blocked

d. Check if the oil bottle is loose

Product maintenance
1. Machine Cleaning
a. Please use wet towel to clean the machine b. Please turn off and take out the battery when cleaning the inside of the machine c. If this product is not used for a long time, please clean the oil bottle and remove the battery
2. Clean the oil bottles and atomizer heads a. Remove the essential oil bottle and unscrew the atomizing head b. After washing the essential oil bottle, it is recommended to add an appropriate amount of alcohol and then reload it into the atomization equipment for improved performance and to eliminate any residual odors. Rinse the bottle again after this step and allow it to dry before using it again

Product Description
Type-C Charging Port
Wall Panels
Battery Case
Product Dimensions

ON/OFF button
Long Press: Power on/off Press Twice: Test Spray Mode Press Three Times: Reset the number of spray times to zero (Red light and blue light flashing
three times alternately) Press Five Times: Restore the initial passward (Buzzer sends a sound)

Indicator Light

Spray Nozzle

Atomized Head

Essential Oil Bottle
We have installed an empty bottle in the diffuser, fill it with your favorite essential oil before use
Panel

Installation Instructions
1. Screw drilling installation:
a. Remove the wall panel and mark the screw hole position

b. Drill 3 holes of 5mm diameter at the marked position and hang the wall plate with plastic expanding nails and screws
Anti-theft screw hole

c. Hang the product

d. It is suggested to use anti-theft screws to fix the screws in the anti- theft holes after drilling holes in the wall surface

6.61 inches

6.61 inches

2.75 inches

e. Put the essential oil bottle into the diffuser at the designated position

f. Close the cover to complete the installation

Points to note
Attention Notes
After installation, please keep the machine vertical. Tilting or flipping the machine will cause oil leakage and result in damage to the machine.
Remove the battery when the machine is not in use for a long time.
Please do not immerse the equipment directly in water or wash it with water. Doing so can cause a short-circuit and result in damage to the machine. Essential oil must not be mixed with debris or particles in order to avoid pipe blockages. Do not alternate the use of different types of essential oils to avoid cross-contamination of scents.
Please keep the machine in a cool place and out of direct sunlight.
Keep the machine out of reach of children. Minors are advised to use the machine under adult supervision.
Do not disassemble, repair, or modify the machine, as this can cause product failure. For repairs, please consult your purchasing store or our customer service. (MEIDI_Service@meiditech.com)
Keep the machine away from fire.

2. No Drilling 3M Adhesive Installation:
3M Glue

a. Apply 3M glue to the back of the wall hanging board. (There have corresponding position where shown on the diagram)

b. Stick the hanging board to the wall, and keep it level

c. Wait 24 hours before hanging the product

Product Accessories

Legend

The name of the accessory User manual

Quantity
1

Legend

The name of the accessory

Quantity

T4.0X20mm screw

3

Wall panels

1

Double-sided 3M glue

2

Anti-theft screws

1

KA4.0 plastic expansion pin

3

Type-C data line

1

Essential oils bottle

1

AAalkaline batteries

4

Product Warranty Instuctions
We guarantee that our products meet the necessary safety standards and technical requirements and ensure that all product functions can be fully utilized through normal use and maintenance. Our company provides a one-year free warranty service for customers who have purchased our product (excluding consumables).
1. Within one year of purchase, customers can receive free warranty service if our maintenance staff confirms that the product failure is due to manufacturing processes or materials. 2. It will not be able to receive free warranty service if the product damage is caused by improper use, installation errors, modifications made by the customer, natural disasters, or other human- made damage.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition, compliance with exposure requirements.

USER MANUAL
AUTOMATIC AROMA DIFFUSER

Operation Steps
1. Add Aromatherapy Oil

a. Open the cover of the machine

b. Pull out the atomizer head

c. Fill the bottle with essential oils and tighten the atomizer head

d. Put the essential oil bottle into the diffuser and press down

Artsun Enterprise Company Limited
Add19H Maxgrand plaza, No.3 Tai Yau StreetSan Po Kong, KowloonHongKong

VO-1023G
Please read user manual carefully before using

Softiny App Operation
1. App Download: Search for “Softiny” in the Apple App Store or Google Play Store, or scan the QR code below to download and install.

3. Detail of the Equipment

Scan the QR code to get the app from iOS store

Scan the QR code to get the app from Google Play store

2. Open the Bluetooth settings on your phone and the Softiny App. The app will automatically scan for nearby devices and connect to your phone.

  1. Allow Softiny to access Bluetooth and location permissions

  2. You can view the current power level, location, and number of sprays. You can also test the spray, set a work plan, and perform other operations.

  3. To configure the work plan: Click on “View Work Plan” and add the work schedule for the equipment. This includes selecting the cycle, start and end time, and spray interval time. Please note that no more than 8 work plans can be added.

  4. To access equipment-related settings: Click on the “Settings” icon located in the upper right corner of the details page. This will take you to the settings page where you can make changes to the device name, and location information, reset the spray number, and device connection password, and other related operations.
    4. About the System

d. Fill the essential oil bottle and place it in the diffuser

e. Close the cover to complete the installation

Note: This installation method is not suitable for rough or dusty walls.

2. Install the Battery
Open the battery cover, insert four AA alkaline batteries into the battery case, then place the battery case into the battery compartment, making sure that the two metal contact points are aligned with the positive and negative terminals of the battery case.

  1. Select the device to connect and enter the
    Bluetooth connection password ( Initial password is 888888) Note: If you forget the password, you can reset the device keys by pressing the button 5 times to restore the initial password.

On the Softiny App home page, click on the top button to view the current system version information and language settings.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals