WAMPLER Faux Tape Echo V2 Delay Effect Pedal Instruction Manual
- June 4, 2024
- WAMPLER
Table of Contents
Faux Tape Echo V2
Instruction Manual
Beautiful, warm, and organic “tape echo” style delay with every essential
feature you need.
Delay Mix: Controls the total output volume of the pedal.
Delay: Adjusts the time between each echo.
Repeats: This allows more echo repeats to be heard.
Tone: Makes the echo trail brighter or darker, perfect to keep your
through signal prominent in the mix.
Rate/Depth: Controls the modulation effect on the echoes, giving an
effect similar to a vintage tape echo unit. Rate controls the speed of the
modulation. Depth controls the depth of the modulation.
Subdivision Switch: Selects different delay subdivisions. From left to
right, modes are Quarter notes, Eighth notes, Dotted Eighth or Triplet. Tap
Tempo Stomp Switch: This allows you to tap the delay time.
Bypass Stomp Switch: Turns the effect on/off.
Power: This pedal was designed around the usage of a 9v or 18vDC power
source and is intended to sound its best at 9V. To avoid damage to the pedal,
do not exceed 18VDC, do not use center pin positive adapters, and do not use
AC power. Using an incorrect power adapter can lead to damage and will void
the warranty on the pedal. This pedal draws between 41.3 mA (at 9V) and 54.5
mA (at 18V). The warranty begins at the point of purchase.
WAMPLER Pedals Limited Warranty WAMPLER offers a five (5) year warranty to the original purchaser that this WAMPLER product will be free from defects in material and workmanship. A dated sales receipt will establish coverage under this warranty. This warranty does not cover service or parts to repair damage caused by accident, neglect, normal cosmetic wear, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures, and service, repair, or modifications to the product, which have not been authorized or approved by WAMPLER. If this product is defective in materials or workmanship as warranted above, your sole remedy shall be repair or replacement as provided below.
RETURN PROCEDURES
In the unlikely event that a defect should occur, follow the procedure
outlined below. Defective products must be shipped, together with a dated
sales receipt, freight pre-paid, and insured directly to WAMPLER SERVICE DEPT
– 5300 Harbor Street, Commerce, CA 90040. A Return Authorization Number must
be obtained from our Customer Service Department prior to shipping the
product. Products must be shipped in their original packaging or their
equivalent; in any case, the risk of loss or damage in transit is to be borne
by the purchaser. The Return Authorization Number must appear in large print
directly below the shipping address. Always include a brief description of the
defect, along with your correct return address and telephone number. When
emailing to inquire about a returned product, always refer to the Return
Authorization Number. If WAMPLER determines that the unit was defective in
materials or workmanship at any time during the warranty period, WAMPLER has
the option of repairing or replacing the product at no additional charge,
except as set forth below. All replaced parts become a property of WAMPLER.
Products replaced or repaired under this warranty will be returned via ground
shipping within the United States-freight prepaid. WAMPLER is not responsible
for costs associated with expedited shipping, either to WAMPLER or the return
of the product to the customer.
INCIDENTAL OR CONSEQUENTIAL DAMAGE In no event is WAMPLER liable for any
incidental or consequential damages arising out of the use or inability to use
any WAMPLER product, even if WAMPLER or a WAMPLER dealer has been advised of
the possibility of such damages, or any other claim by any other party. Some
states do not allow the exclusion or limitation of consequential damages, so
the above limitation and exclusion may not apply to you. This warranty gives
you specific legal rights and you may also have other rights which may vary
from state to state.
FOR YOUR PROTECTION
Please complete the online warranty registration within (10) ten days of the
date of purchase so that we may contact you directly in the event a safety
notification is issued in accordance with the 1972 Consumer Product Safety
Act.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
CUSTOMER SUPPORT
Our dedicated staff is ready to help you with any warranty or product
questions – please email us at
[email protected] or call us at
765-352-8626
Please remember to register your pedal as soon as possible after purchase at
the following web page to ensure quicker service if you should ever need to
make a warranty claim:
www.RegisterYourWampler.com For a more
in-depth manual visit:
www.wamplerpedals.com/downloads/
WAMPLERPEDALS.COM
@ Wampler pedals
@ Brian Wampler
@ Wampler pedals
/ Wampler pedals
youtube.com/user/wampcat