WAMPLER Clarksdale Extremely Versatile Classic Style Overdrive Instructions

June 4, 2024
WAMPLER

WAMPLER logo

WAMPLER Clarksdale Extremely Versatile Classic Style Overdrive

Extremely versatile clasSic style of overodrive infused with new modern tweaks.
Active 3 band EQ: The Clarksdale Overdrive has a active 3 band EQ (Bass, Mid, Treble). You can either add or take away each frequency independently.
Volume: Controls the total output volume of the pedal.
Gain: This control adjusts the total amount of gain that is applied to the signal path. Turning the Gain control clockwise will increase the amount of gain in the circuit.
The Big/Smooth switch: In the “Smooth” setting, the sound is a bit more compressed, tighter, and…smoother. In the “Big” setting, the sound is a bit more open, dynamic, and less compressed.
Power: This pedal was designed around the usage of a 9v or 18vDC power source and is intended to sound its best at 9v. To avoid damage to the pedal, do not exceed 18VDC, do not use center pin positive adapters and do not use AC power. Using an incorrect power adapter can lead to damage and will void the warranty on the pedal. This pedal draws between 17mA (at 9 Volts) and 19mA (at 18 Volts). The warranty begins at the point of purchase.

WAMPLER Pedals Limited Warranty

WAMPLER offers a five (5) year warranty to the original purchaser that this WAMPLER product will be free from defects in material and Workmanship. A doted sales receipt will establish coverage under this warranty. This warranty does not cover service or parts to repair damage caused by accident, neglect, normal cosmetic wear, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures and service, repair or moditications to the product, which have not been authorized or approved by WAMPLER. If this product is the detective in materials or workmanship as warranted above, your sole remedy shall be repair or replocement Os provided below.

RETURN PROCEDURES

In the unlikely event that a defect should occur, follow the procedure outlined below. Defective products must be shipped, together with a dated sales receipt, freight pre-paid and insured directly to WAMPLER SERVICE DEPT-5300 Harbor Street, Commerce, CA 90040.A Return Authorization
Number must be obtained from our Customer Service Department prior to shipping the product.
Products must be shipped in their original packaging or its equivalent; in any case, the risk of loss or damage in transit is to be borne by the purchaser. The Return Authorization Number must appear in large print directly below the shipping address. Always include a brief description of the defect, along with yoUr correct return address and telephone number.
When emailing to inquire about a returned product, always refer to the Return Authorization
Number. IF WAMPLER determines that the unit was defective in materials or workmanship at any time during the warranty period, WAMPLER has the option of repairing or replacing the product ot no additional charge, except as set forth below. All replaced parts become a property of WAMPLER.
Products replaced or repaired under this warranty will be returned via ground shipping within the
United States-freight prepaid. WAMPLER is not responsible for costs associated with expedited shipping, either to WAMPLER or the return of the product to the customer.

INCIDENTAL OR CONSEQUENTIAL DAMAGE In no event is WAMPLER liable for any incidental or
Consequential damages arising out of the use or inability to use of any WAMPLER product, even it

WAMPLER or a WAMPLER dealer has been advised of the possibility of such damages, or any other claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.

FOR YOUR PROTECTION

Please complete the online warranty registration within (10) ten days of the date of purchase so thot we may contact you directly in the event a safety notification is issued in accordance with the 1972 Consumer Product Safety Act.

This equipment has been tested and found to comply with the limits tora Closs B digital device, pursuant to port 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, it is not installed and used in accordance with the instructions may cause harmful interference
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/V technician for help. radio communications.
    Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CUSTOMER SUPPORT
Our dedicated staff is ready to help you with any warranty or product questions- please email us at help@womplerpedals.com or call us at 765-352-8626
Please remember to register your pedal as soon as possible after purchase at the following web page to ensure quicker service if you should ever need to make a warranty claim: www.Register YourWampler.com
For a more in-depth manual visit www.wamplerpedals.com/downloads/

Wamplerpedals
Brianwampler
youtube.com/user/wampcat

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals