WAMPLER Mini Faux Spring Reverb Guitar Effect Pedal Instruction Manual
- June 4, 2024
- WAMPLER
Table of Contents
WAMPLER Mini Faux Spring Reverb Guitar Effect Pedal Instruction Manual
INSTRUCTIONS
The simplicity of Wampler’s classic spring reverb, now as a mini.
Depth: Controls the size and depth of the reverb, turn it clockwise for bigger, longer reverbs.
Tone: This control allows you to make the reverb brighter and more pristine (clockwise) and darker and more vintage sounding (counterclockwise).
Volume: Controls the total output of the reverb trail.
Power: This pedal was designed around the usage of a 9 to 12v power source and is intended to sound best at 9v. To avoid damage to the pedal, do NOT exceed 12vDC, do not use center pin positive adapters and do NOT use AC power. Using an incorrect power adapter can lead to damage and will void the warranty on the pedal. This pedal draws approximately 64.3mA at 9v, and 69.5mA at 12v. NOTE: this pedal cannot be run from a battery, external power supply only.
Warranty
WAMPLER Pedals Limited Warranty:
WAMPLER offers a five (5) year warranty to the original purchaser that this
WAMPLER product will be free from defects in material and workmanship. A dated
sales receipt will establish coverage under this warranty. This warranty does
not cover service or parts to repair damage caused by accident, neglect,
normal cosmetic wear, disaster, misuse, abuse, negligence, inadequate packing
or shipping procedures and service, repair or modifications to the product,
which hove not been authorized or approved by WAMPLER. If this product is
defective in materials or workmanship as warranted above, your sole remedy
shall be repair or replacement as provided below.
RETURN PROCEDURES:
In the unlikely event that a defect should occur, follow the procedure
outlined below. Defective products must be shipped, together with a dated
sales receipt, freight pre-paid and insured directly to WAMPLER SERVICE
DEPT- 5300 Harbor Street, Commerce, CA 90040. A Return Authorization Number
must be obtained from our Customer Service Department prior to shipping the
product. Products must be shipped in their original packaging or its
equivalent; in any case, the risk of loss or damage in transit is to be borne
by the purchaser. The Return Authorization Number must appear in large print
directly below the shipping address. Always include a brief description of the
defect, along with your correct return address and telephone number.
When emailing to inquire about a returned product, always refer to the Return
Authorization Number. If WAMPLER determines that the unit was defective in
materials or workmanship at any time during the warranty period, WAMPLER has
the option of repairing or replacing the product at no additional charge,
except as set forth below. All replaced parts become a property of WAMPLER.
Products replaced or repaired under this warranty will be returned via ground
shipping within the United States-freight prepaid. WAMPLER is not responsible
for costs associated with expedited shipping, either to WAMPLER or the return
of the product to the customer.
INCIDENTAL OR CONSEQUENTIAL DAMAGE: In no event is WAMPLER liable for any incidental or consequential damages arising out of the use or inability to use of any WAMPLER product, even if WAMPLER or a WAMPLER dealer has been advised of the possibility of such damages, or any other claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.
FOR YOUR PROTECTION:
Please complete the online warranty registration within (10) ten days of the
date of purchase so that we may contact you directly in the event a safety
notification issued in accordance with the 1972 Consumer Product Safety Act.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CUSTOMER SUPPORT:
Our dedicated staff is ready to help you with any warranty or product
questions – please email us at
help@wamplerpedals.com or call us at (765)
352.8626 Please remember to register your pedal as soon as possible after
purchase at the following web page to ensure quicker service if you should
ever need to make o warranty claim:
www.RegisterYourWampler.com
For a more in depth manual visit: www.wamplerpedals.com/downloads/
@ Wamplerpedals
@ Brianwampler
@ Wamplerpedals
/ Wamplerpedals
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>