WAMPLER Pinnacle Standard Overdrive Pedal User Manual
- June 4, 2024
- WAMPLER
Table of Contents
WAMPLER Pinnacle Standard Overdrive Pedal
The Brown Sound is the ultimate “Eruption” of classic rock guitar distortion tones.
Features
- Volume: Controls the total output volume.
- Gain: This control adjusts the total amount of gain that is applied to the signal path. Turning the Gain control clockwise will increase the amount of gain in the circuit.
- Tone: Decreases treble when turned counterclockwise, increases treble when turned clockwise.
- Mid Contour: Changes the EQ shape of the effect, from scooped (clockwise) to mid-heavy when turned counterclockwise. Gain/Boost
- Toggle Switch: When the switch is in its downward position it operates in a lower gain setting. Setting it in its upward position will restructure the gain stages to give a higher gain ability.
- Vintage/Modern Toggle Switch: Changes the high-frequency character of the sound. Modern has more high-frequency content while Vintage has less high-frequency content.
- Power: This pedal was designed around the usage of a 9v or 18v DC power source and is intended to sound its best at 9V. To avoid damage to the pedal, do not exceed 18VDC, do not use center pin positive adapters, and do not use AC power. Using an incorrect power adapter can lead to damage and will void the warranty on the pedal. This pedal draws approximately 7mA at 9vdc. The warranty begins at the point of purchase.
WAMPLER Pedals Limited
Warranty WAMPLER offers a five (5) year warranty to the original purchaser that this WAMPLER product will be free from defects in material and workmanship. A dated sales receipt will establish coverage under this warranty. This warranty does not cover service or parts to repair damage caused by accident, neglect, normal cosmetic wear, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures, and service, repair, or modifications to the product, which have not been authorized or approved by WAMPLER. f this product is defective in materials or workmanship as warranted above, your sole remedy shall be repair or replacement as provided below.
RETURN PROCEDURES
In the unlikely event that detection should occur, follow the procedure outlined below. Defective products must be shipped, together with a dated sales receipt, freight pre-paid, and insured directly to WAMPLER SERVICE DEPT-5300 Harbor Street, Commerce, CA 90040. A Return Authorization Number must be obtained from our Customer Service Department prior to shipping the product. Products must be shipped in their original packaging or their equivalent; in any case, the risk of loss or damage in transit is to be borne by the purchaser. The Return Authorization Number must appear in large print directly below the shipping address. Always include a brief description of the defect, along with your correct return address and telephone number. When emailing to inquire about a returned product, always refer to the Return Authorization Number. If WAMPLER determines that the unit was defective in materials or workmanship at any time during the warranty period, WAMPLER has the option of repairing or replacing the product at no additional charge, except as set forth below. All replaced parts become a property of WAMPLER. Products replaced or repaired under this warranty will be returned via ground shipping within the United Stotestreight prepaid. WAMPLER is not responsible for costs associated with expedited shipping, either to WAMPLER or the return of the product to the customer.
INCIDENTAL OR CONSEQUENTIAL DAMAGE
In no event is WAMPLER liable for any incidental or consequential damages arising out of the use or inability to use any WAMPLER product, even if WAMPLER or a WAMPLER dealer has been advised of the possibility of such damages, or any other claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitations and exclusion may not apply to you. Ihis warranty gives you specific legal rights and you may also have other rights which may vary from state to state.
FOR YOUR PROTECTION
Please complete the online warranty registration within (10) ten days of the date of purchase so that we may contact you directly in the event a safety notification is issued in accordance with the 1972 Consumer Product Safety Act.
This equipment has been tested and found to comply With the limits for a Closs B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment out and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CUSTOMER SUPPORT
Our dedicated staff is ready to help you with any warranty or product
questions- please email us at
[email protected].or call us at
765-352-8626 Please remember to
register your pedal as soon as possible after purchase at the following web
page to ensure quicker service if you should ever need to make a warranty
claim: www.RegisterYourWampler.com
For a more in-depth manual visit:
www.wamplerpedals.com/downloads/