WAMPLER 312640 Paisley Drive Pedals User Manual
- June 4, 2024
- WAMPLER
Table of Contents
The Paisley Drive
WP_ PaisleyDrive Wampler Manual 2-2-17_OL-w-bleed.indd
The Paisley Drive, designed for and with Brad Paisley
Volume: Controls the total output volume.
Tone: Decreases treble when turned counterclockwise, increases treble
when turned clockwise.
Gain: This control adjusts the total amount of gain that is applied to
the signal path. Turning the Gain control clockwise will increase the amount
of gain in the circuit.
Presence: Brings more sparkle into the tone, ideal for darker-sounding
guitars or amplifiers.
EQ Shape : Gives you three different EQ options – right is slightly mid-
scooped, the middle is fairly flat and left is mid-prominent.
Power: This pedal was designed around the usage of a 9v or 18vDC power
source and is intended to sound its best at 9V. To avoid damage to the pedal,
do not exceed 18VDC, do not use center pin positive adapters and do not use AC
power. Using an incorrect power adapter can lead to damage and will void the
warranty on the pedal. This pedal draws approximately 12mA at 9vdc. The
warranty begins at the point of purchase.
WAMPLER Pedals Limited Warranty WAMPLER offers a five (5) year warranty
fo the original purchaser that this WAMPLER product will be free from defects
in material ond workmanship. A dated sales receipt will establish coverage
under this warranty. This warranty does not cover service of parts fo repair
damage caused by accident, neglect, normal cosmetic wear, disaster, misuse,
abuse, negligence, inadequate packing or shipping procedures and service,
repair or modifications to the product, which have not been authorized or
approved by WAMPLER. If this product is defective in materials or workmanship
as warranted above, your sole remedy shall be repair or replacement as
provided below.
RETURN PROCEDURES
In the unlikely event that 0 defect should occur, follow the procedure
outlined below. Detective products must be shipped, together with o dated
sales receipt, freight pre-paid and insured directly to WAMPLER SERVICE DEPT –
5300 Harbor Street, Commerce, CA 90040. A Return Authorization Number must be
obtained from our Customer Service Department prior to shipping the product.
Products must be shipped in their original packaging or its equivalent; in any
case, the risk of loss of damage in transit és to be borne by the purchaser.
The Return Authorization Number must appear in large print directly below the
shipping address. Always include a brief description of the defect, along with
your correct return address and telephone number.
When emailing to inquire about o returned product, always refer to the Return
Authorization Number. If WAMPLER determines that the unit was defective in
materials or workmanship at any time during the warranty period, WAMPLER hes
the option of repairing or replacing the product at no additional charge,
except as set forth below. All replaced parts become a property of WAMPLER.
Products replaced or repaired under this warranty will be returned via ground
shipping within the United States freight prepaid. WAMPLER is not responsible
for costs associated with expedited shipping, either to WAMPLER or the return
of the product to the customer.
INCIDENTAL OR CONSEQUENTIAL DAMAGE In no event is WAMPLER liable for any
incidental or consequential damages arising out of the use or inability to use
of any WAMPLER product, even if WAMPLER or a WAMPLER dealer has been advised
of the possibility of such damages, or any other claim by any other party.
Some states do not allow the exclusion or limitation of conse quentialdamoges,
so the above limitation and exclusion may not apply to you. This warranty
gives you specific legal rights and you may also have other rights which may
vary from state to state.
FOR YOUR PROTECTION
Please complete the online warranty registration within (10) ten days of the
date of purchase so that we may contact you directly in the event a safety
notification is issued in accordance with the 1972 Consumer Product Safety
Act.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a draft different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CUSTOMER SUPPORT
Our dedicated staff is ready to help you with any warranty or product
questions – please email us at
help@wamplerpedals.com or call us at
765-352-8626
Please remember to register your pedal as soon as possible after purchase at
the following web page to ensure quicker service if you should ever need to
make a warranty claim: www.RegisterYourWampler.com
For a more in-depth manual
visit:www.wamplerpedals.com/downloads/
WAMPLERPEDALS.COM
Wampler pedals Brianwampler
Wampler pedals Wamplerpedals
youtube.com/user/wampcat
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>