timberk T-VCC-225 Vacuum Cleaner with Container Instruction Manual

June 12, 2024
TIMBERK

timberk T-VCC-225 Vacuum Cleaner with Container

Product Information

  • Model: T-VCC-225
  • Brand: Timberk
  • Type: Vacuum Cleaner with Container
  • Languages: Russian (RU), English (ENG), Kazakh (KZ)
  • Instruction Manual: IM2023

Product Usage Instructions

  1. Important Information:

    • Read the instruction manual carefully before using the vacuum cleaner.
    • The manual does not cover all possible situations, and the manufacturer is not responsible for damage caused by incorrect installation, voltage fluctuations, or modifications.
    • Refer to the label on the device for technical data and other useful information.
    • Use the vacuum cleaner only for its intended purpose.
  2. General Operation:

    • Ensure that the vacuum cleaner is properly connected to power.
    • Switch on the vacuum cleaner.
  3. Cleaning:

    • Select the appropriate nozzle or attachment for the desired
      cleaning task.

    • Move the vacuum cleaner over the surface to be cleaned.

  4. Maintenance:

    • Regularly empty the container when it becomes full.
    • Clean or replace filters as needed.
  5. Safety Precautions:

    • Keep the vacuum cleaner away from water and other liquids.
    • Avoid using the vacuum cleaner on wet surfaces.
    • Do not operate the vacuum cleaner without proper grounding.
    • Unplug the vacuum cleaner before performing any maintenance or cleaning.
    • Keep the vacuum cleaner out of reach of children.

SAFEGUARDS

When using an electric vacuum cleaner, a number of safety precautions must be observed. Improper operation by ignoring safety precautions can result in damage to the health of the user and other people, as well as damage to their property.

  1. Read this instruction manual carefully to prevent any unit damage or injure when using. Mishandling can cause a damage to the product, a material damage of health harm to user.
  2. When using this appliance, basic precautions should always be followed:
  3. Before the first use of the appliance check that the voltage indicated on the rating label corresponds to the mains voltage in your home.
  4. For home use only. Do not use for industrial purposes.
  5. Do not use the appliance outdoors and on wet surfaces.
  6. To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened DO NOT TOUCH the appliance, unplug it immediately and check in a service center.
  7. Do not handle the plug with wet hands. Never switch off the appliance by pulling the cord.
  8. Do not let the cord hang over sharp edges or touch hot surfaces.
  9. Always unplug the appliance from the power supply when not in use and before servicing.
  10. In case of power cord is damaged, its replacement should be done by the manufacturer or service department or the other high-skill person to avoid any danger.
  11. To avoid deforming of plastic components of the appliance or fire accident, never leave the appliance exposed to direct sun light or near any heater.
  12. The appliance is not intended for use for physically, sensory or mentally disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by a responsible person.
  13. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Сleaning and user maintenance shall not be made by children without supervision.
  14. Children must be under control in order not to be allowed to play with the appliance.
  15. To prevent damage to the hose, do not kink or stretch it.
  16. Do not put any object into air outlets. Do not use with outlet blocked. Keep free of dust, hair and anything that may reduce airflow.
  17. Be careful when cleaning on stairs.
  18. Before start using the vacuum cleaner, please remove all large or sharp objects from the floor in order to prevent damage of the unit.
  19. CAUTION: To avoid voltage overload do not plug the unit and other powerful electrical appliances to the power supply at the same time.
  20. Never use the vacuum cleaner without filters.
  21. Do not use the appliance on wet surfaces. This unit does not absorb water.
  22. If you have cleaned the carpet with liquid detergent, let the carpet dry up completely before vacuuming it.
  23. Never use the appliance without dust bin. Replace the dust bin without delay if it is damaged.
  24. Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
  25. If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
  26. The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.
  27. The manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the following format XX.XXXX where first two figures XX is the month of production, and following four figures XXXX is the year of production.
  28. When disconnecting the appliance from the mains, do not pull on the power cord, grasp the plug. Do not twist or wind it around anything.

 APPOINTMENT OF THE DEVICE.

The device is designed for cleaning the floor from dust and small debris.

SPECIFICATIONS

Specifications of the device are shown in Table 1.
Table 1

Parameter Units Technical parameters
Power supply V/Hz 220-240~/50
Rated power consumption W 2400
Dust bin volume l 2,5
Cord length m 5
Noise level dB(А) ≤ 80
Suction power W 450
Net weight kg 6.3
Gross weight kg 7.4
Device dimensions mm 420x297x352
Packing dimensions mm 454x327x390

DEVICE DESCRIPTION

timberk T-VCC-225 Vacuum Cleaner with Container fig-1

  1. Wheel
  2. Dust collector
  3. Dust cap
  4. Dust collector handle
  5. Dust collector top part
  6. Sucking inlet
  7. Dust collector bottom release button
  8. Dust collector bottom
  9. Dust collector lock button
  10. ON/OFF button
  11. Power cord winding button
  12. Filter
  13. «Floor/carpet» nozzle
  14. «Furniture/slot» nozzle
  15. Retractable tube
  16. Retractable tube length adjuster
  17. Hose
  18. Hose locks
  19. Hose air flow control switch
  20. Power cord and plug
  21. Grid
  22. HEPA filter
  23. Filter cover

DELIVERY SET

  1. Vacuum cleaner and accessories – 1 pc.
  2. Instruction manual – 1 pc.
  3. Warranty card – 1 pc.
  4. Packing – 1 pc.

PREPARATION

  • The device is designed for cleaning dust in the room.
  • Unpack the device and remove the sticker from the body.
  • In order to connect the hose to the vacuum cleaner insert hose base into sucking inlet and press gently until it clicks. In order to disconnect the hose press two locks located at hose base sides.
  • Pull out the retractable tube until the necessary length is reached. For this purpose move the retractable tube length adjuster and pull out the tube end.
  • Insert the hose into the tube.
  • Attach one of the nozzles to the tube:
  • The “Floor/cfrpet” combined nozzle is designed for carpet mats and similar floor coatings, and for flat surfaces;
  • The “Furniture/slot” nozzle is designed for cleaning upholstered furniture, curtains and decorative surfaces and
  •  such as corners or narrow slots.

 INSTRUCTION FOR USE

  • “Cyclone” system ensures maximum power during cleaning.

  • Before starting, unwind the cord to a sufficient length and insert the plug into the power supply. The yellow mark on the cord shows optimal cord length. Do not unwind the cord beyond the red mark.

  • Press On/Off button to switch the unit on and press again to stop it.

  • You can adjust the airflow using the airflow regulator on the flexible hose handle:

  • Decrease flow for cleaning curtains, books, furniture, etc. Increase flow for cleaning bare floor.

  • To rewind the cord, press the rewind button and guide the cord with hand to ensure that it does not whip causing damage.

  • To prevent motor overheating do not work continuously longer than 30 minutes and obligatory stop the vacuum cleaner for no less than 15 min.
    WARNING!

  • Be sure to clean the container after each cleaning.

  • Never use the vacuum cleaner without an installed filter and with adamaged or dirty filter. Otherwise, dust will fall into the motor and cause damage to the vacuum cleaner.

  • Don’t use the vacuum cleaner if the container is filled to the mark “MAX”. When the container is filled, dirty air clogs up the vacuum cleaner filter and the engine can overheat and disable.

  • Don’t use the vacuum cleaner for cleaning of material debris such as cement, whitewash, plaster, metal shavings and etc. These particles cause to the engine damage.

  • Don’t wash vacuum cleaner parts in a dishwasher or a construction machine.

CARE AND CLEANING

  • Switch off the appliance and pull the plug from the power supply.
  • Clean the appliance outside surface with soft cloth using mild non-abrasive detergent.
  • Vacuum cleaner or cord should never be immersed into water or any liquids.
  • We recommend making the filtration system clean up after every using.
  • For removing dust tank press dust tank release button. 
  • To open the dust tank bottom and clean dust and garbage need to press the button for opening the bottom of the dust tank.

FILTER CLEANING

  • Clean filter at least once a year. In case if the vacuum cleaner is used frequently, wash the filters after each 3 to 5 cleaning operations.

  • Press the dust container lock button and disconnect the container from the cleaner housing.

  • Unscrew the container lid in a counterclockwise direction.

  • Remove the dust collection capsule.

  • Remove the filter cover and remove the filter by turning it counterclockwise.

  • Rinse the filter sponge and filter cover with warm water and air dry completely.

  • Reinstall all parts in reverse order.

  • Remove the air vent on the back of the vacuum cleaner by pulling on the ledge.

  • Wash the filters with running water and dry them thoroughly.

  • Replace the filters after cleaning.
    CAUTION:

  • Never use the appliance without filters.

  • Do not use a washing machine to rinse filters. Do not use a hair dryer to dry them.

STORAGE

  • Place the appliance vertically.
  • Insert the tube into special holder on the body.

UTILIZATION RULES

The symbol on the unit, packing materials and/or documentation means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point. For additional information about the actual system of garbage collection address to the local authority.
Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.
After the lifetime of the device expires, it should be recycled in compliance with the laws, rules and methods in region of recycling. Detailed information about the recycling of the device, you can receive from a representative of the local authorities, after providing full information about the device. The manufacturer and authorized organization of the manufacturer do not carry responsibility for the fulfillment by the Buyer of the requirements of legislation on utilization and methods of utilization of the device selected by the Buyer. The lifetime of the device is indicated in the warranty card. The warranty period for the device and warranty terms are specified in the warranty card. The warranty card is an integral part of the documentation supplied with this unit. If there is no warranty card in the delivery set, ask for it from the Seller. The warranty card provided by the Seller must conform to the manufacturer’s form.
The manufacturer and the authorized organization of the manufacturer remove responsibility for any possible harm which can be caused to people, animals or property directly or indirectly if this harm occurred as a result of noncompliance with the rules and operating conditions, installation of the device, intentional or reckless actions of the user- and/or third parties, as well as in situations caused by natural and/or anthropogenic accidents.
www.timberk.ru

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals